KERDOM 934Z Drafting Office Chair Instruction Manual

: June 14, 2024
: KERDOM

Table of Contents

Instructions for Use
Accessories List
Assembly Instruction
Read User Manual Online (PDF format)
Download This Manual (PDF format)

KERDOM 934Z Drafting Office Chair

Instructions for Use

KERDOM-934Z-Drafting-Office-Chair-
fig-1

Thanks for purchasing our products. Please read this manual before assembly. And please assemble in order. After the assembly, keep the instruction properly. Make sure all the parts are concluded (13 kinds in total).

Accessories List

KERDOM-934Z-Drafting-Office-Chair-
fig-2

Notice [If any question, contact kerdom-service@outlook.com]

This is a single chair, so please do not seat 2 or more persons, just seat only one person.
Do not stand on the chair.
Do not sit reverse or sit outside of the seat cushion.
Check the screws once every 6 months, to make sure the screws are tight. Do not use the chair when the screws are loose.
Please assemble according to the instructions.

Assembly Instruction

Please assemble in a wide and flat place.

step1
Insert Castors (4) into Foot Stool (3). There are 5 Castors (4) need to be inserted. Insert Air Rod (5) into the hole of Foot Stool (3). Put it aside
step2
Insert the Foot Ring (13) into the assembled Air Rod (5) at your desired height. But at least one inch from the top of the outer circle of Air Rod (5) as shown. Please follow the shown direction of the arrow to tighten the knob by hand on the Foot Ring (13) until the Foot Ring (13) is fixed.
step3
Tighten the Screws M6X30mm (9) with Hexagon Wrench (11) to fix 2 Armrests(6) to the back of Backrest(1). Tighten the 4 screws firmly and then cover the screws with Decora tion Caps (12).
step4
After Step 3, fix the bottom of Armrests (6) to the back of Seat Cushion (2). Tighten the Screws M6X35mm (8) with Hexagon Wrench (11) firmly.
- Caution: There is a FRONT sticker on the front of Seat Cushion (2)
step5
Fix Base Plate (7) to the bottom of Seat Cushion (2). Tighten the Screws M6X25mm (10) with Hexagon Wrench (11) firmly.
step6
Pick up the Step 2’s Air Rod (5) and Foot Stool (3). Insert the Air Rod (5) into Step S’s Base Plate (7). There’s a hole in the middle of Base Plate (7). Press the Seat Cushion (2) from top to bottom, use your whole body’s strength to insert it firmly, the assembly is complete now.

Before using the product, we recommend that you scan the QR code next to it and activate the warranty first, so that we can bring you a better after-sales guarantee and more considerate service.