WUDUNG H80 Smartwatch User Manual
- June 10, 2024
- WUDUNG
Table of Contents
WUDUNG H80 Smartwatch
Download Mobile App
- Scan the QR code below to download and install the watch app.
- Scan the QR code to download the mobile app.
Charging and Activation
- Charging the device to active before the frist time using,place the charger positive and negative with watch correctly,connect the other end of the charger to a USB connector or a USB port of a computer.
Connect with the Watch
- In the Settings > “About” option, the MAC address will be displayed. You can identify your device by the MAC address in the list of devices.
- After the watch is successfully bound, the watch will be automatically connected to the phone each time when opening the app in the future, and you can sync your data by dropping down the client data.
Operation Guide
Basic Functions
Heart Rate (HR)
- The watch can record and display your Heart Rate for 24 hours a day.
- You can tap the Heart Rate screen to measure your current Heart Rate.
- For analysis and data records of more details, please check on the client app.
Blood Pressure (BP)
- You can tap the Blood Pressure screen to measure your current Blood Pressure.
- For analysis and data records of more details, please check on the client app.
SpO2
- You can tap the SpO2 screen to measure your current SpO2.
- For analysis and data records of more details, please check on the client app.
Sports Modes
-
Display 20+ modes of exercise. When you start the exercise,the watch will synchronize the time to display the corresponding data suce as heart rate,calories and so on.You can also pause or stop the exercise.
-
If you’ve been wearing the watch while you sleep, it can provide sleep time and sleep status, as well as show sleep quality on the watch screen and on the app.
Note: The watch needs time to judge the state of falling asleep and getting up, such as sitting on the sofa for a long time, reading a book by the bed and other small actions, the watch can be considered as sleep.
Weather
- The weather page will display the current weather and air quality information, as well as the weather conditions of the next day.
- The weather data can be obtained only when the watch is connected to the app. If the watch is disconnected for a long time, the weather information will not be updated.
FAQ
- Q1: How is Heart Rate measured?
- The watch strikes a beam of light onto the skin. As the heart pumps blood, blood vessels are filled with blood. Since blood tends to absorb green light and reject red light, the heart rejects lights of different colors when it contracts and relaxes. The watch records the Heart Rate simply by detecting these rejected lights.
- Q2: Why does Blood Pressure measured with the watch deviate from that measured with a sphygmomanometer?
- The deviation between the watch and the sphygmomanometer in terms of the Blood Pressure measured is caused by multiple factors. The sphygmomanometer measures the Blood Pressure in the brachial artery while the watch measures the Blood Pressure in the two main branches of the arterioles. If you use the watch and a sphygmomanometer to measure the Blood Pressure at the same time, as the blood flow in the arteries is in a centrifugal direction, the cut puts pressure on the area below the middle of your elbow when the sphygmomanometer is measuring, so that the blood cannot flow smoothly to the arterial branches below temporarily. The increased tension in the blood vessels will cause a larger deviation of upper and lower blood pressure measurements.
- Q3: How do I receive notifications on my watch?
1. Make sure that you allow the smartwatch to display notifications on your phone before connecting the watch.
2. Make sure that the lock screen and notification center banner are turned on and always display previews (default). Please make sure that your phone can receive notifications first.
3. Please turn on the app push permission on “Dafit”.Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>