Well FMTRANS-BT-RINGER-WL Bluetooth Car Kit and Headset Instruction Manual

Well FMTRANS-BT-RINGER-WL Bluetooth Car Kit and Headset

Warning

•  Before using the product for the first time, please read the instructions for use below and retain them for later reference. The original instructions were written in the Hungarian language.
•  This appliance may be used by persons with impaired physical, sensory or mental capabilities, or lacking in experience or knowledge, as well as children from the age of 8, if they are under supervision or have been given instruction concerning use of the appliance and they have understood the hazards associated with use. Children should not be allowed to play with the unit. Children may only clean or perform user maintenance on the appliance under supervision. After unpacking the unit, confirm that it has not been damaged during transit. Keep the packaging away from children if it contains plastic bags or other potentially hazardous components.
•  Observe the parameters of the device to be charged and check the manufacturer’s instructions written in its instruction manual.
•  Do not connect the device to the charger when starting and stopping the engine.
•  Remove it from the vehicle socket when not in use.
•  Poor radio reception or a short antenna may interfere with operation.
•  Position it so that it does not obstruct safe driving.
•  To avoid the risk of accidents, do not make any adjustments while driving.
•  Protect it from dust, humidity, liquids, heat, dampness, frost, shock and direct thermal radiation or sunshine! Use only indoor, in dry circumstances.
•  Make sure that no foreign objects can get through the openings.
•  There may be differences between the different audio files, due to their different parameters of volume and sound quality.
•  Speakers contain magnets, so do not place such objects near them which are sensitive to magnetic field (e.g.: credit card, cassette, compass …).
•  Improper installation or improper handling invalidates the warranty.
•  If the product has reached the end of its service life, it is classified as hazardous waste together with its battery. Handle in accordance with local regulations.
• The product is not a toy. Keep out of reach of children
• To prevent possible hearing damage, do not listen at high volume levels for long periods.

LOCATION OF CONTROLS

1.  LED Display
2.  Button
3.  Button
4.  Volume control knob
5.  USB Type-C Port
6.  USB QC3.0 Port
7.  Headset
8.  Headset Base
9.  FM Transmitter
10.  Button
11.  Indicator LED
12.  Car Cigarette Plug

OPERATION

For listening to music from your BT Device through the unit and your Car Radio, follow the steps below

PAIRING
Pairing the unit to your Car Radio：

1.  Connect the unit to the car cigarette lighter socket. The unit will automatically power on and the LED Display on the Unit will illuminate & blink. The voltage of the car battery will appear on the LED Display at first.
2.  Then a default FM Channel will appear on the unit (For example:88.0MHz).
3. The Headset on the Unit will start to charging and the Red Indicator on it will illuminate. (When charging is complete, the Red Indicator will turn off).
4.  Turn on your Car Radio and enter the radio FM mode as usual. Search for a blank FM channel without any radio signal received (For example:107.0MHz).
5.  Press and hold the Volume Control knob on the unit until the LED Display on the until start to blink. Then press the Button on the unit repeatedly (or turn around the Volume Control Knob on the unit) until the same channel frequency appear on the LED Display as illustrated below (For example: 107.0MHz):

LISTENING TO MUSIC THROUGH PAIRED BT DEVICE

1.  After step 1 & 2 & 3, now you can play the music or answer the incoming call with the paired BT device as usual.
2.  During playback:
   •  Turn the Volume Control knob on the until to adjust volume level as desire. (Or, use the Volume Controls on the Car Radio or paired BT Device to adjust volume level).
   •  Press the Volume Control knob to pause; press again to resume normal playback.
   • Press the Buttons repeatedly to skip tracks.
3.  If the unit is paired to a Cell Phone and a call is incoming during an active music session:
   •  Pick up the Headset from until and hang to your ear, then you can answer the call as normal. When your call is complete, press the button on Headset or put the Headset back to Headset Base directly to disconnect or end the call. Then Press the Volume Control Knob to resume to music playback.
   •  Or, pick up the Headset form the unit and put it back to the Headset base after 2-3 seconds to decline the incoming call, then resume to music playback.
   •  Quick press the button twice to redial the last telephone number your cell phone called.
4.  To shut off the unit, unplug the unit from car cigarette lighter socket.

Notes:

•  When the external BT Device searches the FM Transmitter & Headset on the unit, our model name “BT-Ringer” will appear External BT Device Name List.
•  If while pairing you are asked for a code please try “0000” or “1234”.
•  During playback, If keep the Headset on the unit, music can be listened from your car radio. If take the Headset apart from unit, music can be listened from your Headset.
• The Headset can be used as a independent BT Headset, once paired with the external BT Device, you can play the music or answer the incoming call with the paired BT Device as usual.

BUILT-IN USB QC3.0 FAST CHARGER & TYPE-C CHARGER

The unit has a built-in USB QC3.0 Fast Charger & Type-C Charger. Use it to charge the external Device as below

1. Connect the unit to the car cigarette lighter socket to power on the unit.
2.  Connect the full size USB Plug of the charging cable (not included, to realize fast charging, the USB charging cable must be a fast charging cable) from the USB QC 3.0 Port to the external Device. Charging will automatically start in QC 3.0 fast charge or Type-C charge mode, Monitoring the charging status by the Charging Indicators on the external Device as usual.
3.  When finished charging, disconnect the external Device from the USB QC3.0 Fast Charger /Type-C Port.
4.  Connect the USB Type-C Plug of the charging cable (not included) from the USB Type-C Port to the external Device.

Note: The unit has a built-in overload/overheats protector. If the output of the unit is overload (or short circuit). The charger will auto shut off. Unplug the external Device from the USB QC3.0 or Type-C Port. The charger will auto reset.

PACKAGE INCLUDES

1.  Wireless FM Transmitter with Headset
2.  User Manual

DUE TO CONTINUOUS IMPROVEMENTS THE DESIGN AND SPECIFICATIONS MAY CHANGE WITHOUT ANY PRIOR NOTICE.

Waste electrical and electronic equipment are a special waste category, collection, storage, transport, treatment and recycling are important because they can avoid environmental pollution and are harmful to health. Submitting waste electrical and electronic equipment to special collection centers makes the waste to be recycled properly and protecting the environment. Do not forget! Each electric appliance that arrives at the landfill, the field, pollutes the environment!

Importer & distributor:
SC VITACOM ELECTRONICS SRL
CIF: RO 214527
Tel. 0264-438401
office@vitacom.ro, www.vitacom.ro

References

• 📧office@vitacom.ro
• Magazin online audio, video, IT si electronice/electrocasnice | Vitacom
• Magazin online audio, video, IT si electronice/electrocasnice | Vitacom

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>