VISION WELL CG6S Security Cameras Wireless Outdoor Operational Manual

VISION WELL CG6S Security Cameras Wireless Outdoor

Introduction

The wireless outdoor security cameras allow cloud and SD card storage and offer lifetime free 7-day cycled cloud storage. It may be installed anyplace because it is wire-free and waterproof. With constant, round-the-clock security for your house, you can feel secure.

• Battery life ranges from 1 to 5 months on a single charge. You can share this security camera with users worldwide with multiple user sharing
• 100% wire-free and waterproof to IP65 standards, it may be installed anywhere and resist any conditions.
• Three quick alert techniques: siren, white light flash, and push notification
• You can use a webcam to connect with your family and friends in real time, and you can even use it to fend off robbers.
• Artificial intelligence (AI) motion detection technology can identify people, pets, vehicles, and packages.
• Even if it’s nighttime, 1080P HD colour night vision allows you to view colour images and videos.
• Customize activity zones and numerous defined locations’ monitoring

Rechargeable, water-resistant, and wire-free
One charge of this wireless rechargeable outdoor/indoor camera can last up to five months of worry-free operation. The wireless outdoor security cameras that are IP65 waterproof can operate in any condition. Since there are no power cords or network cables required for the WIFI cam, it may be installed almost anyplace using the supplied bracket and screw.

PIR Motion Analysis with Recognition by AI
This wifi outdoor camera has superior clever AI motion detection and can clearly analyse and identify people, cars, pets, and packages. Once the outdoor security cameras detect motion, the AI PIR sensor will be activated in real time, and at the same time, a push notification will be sent to your phone via the app. Additionally, numerous people can access this security camera.

Night vision in 1080P HD with live video and pictures
The wireless outdoor security cameras offer a degree wide angle and 1080P quality video and image. There are two night vision modes available: infrared night vision with a 33-foot viewable range and full colour night vision. It will offer a crisp, wide footage of whatever region you want to monitor, day or night. The system’s live or recorded video can be accessed from any location at any time using the supplied app.

Two-way talk and an instant smart siren
Real-time, two-way audio calls are supported via the built-in microphone and speaker of this outdoor camera. The smartphone app allows you to speak directly with your loved ones, deter burglars, and screen visitors at your entrance. Drive away burglars and unwelcome guests with a siren, a white light that flashes, or two-way communication.

Long battery life and wire-free operation
The battery life of this wireless outdoor camera is between one and five months. Additionally, because it is entirely wire-free, you may install it wherever.

Several Users Sharing
With the help of this wireless camera for home security, you can secure your house, care for your infant and pet, and keep your entire family safe at once.

Packing list

1. Camera*1
2. Bracket*1
3. Mounting kit*1
4. USB charging cable *1
5. Operation instruction*1

Product Appearance

Quick start

The wireless smart battery camera supports a battery-powered supply and AC- powered supply.

1. Download and install the App
   The wireless smart battery camera supports Android and iOS App. For your best experience, please scan the QR code below with your mobile phone, install the app, and follow the instruction to complete the user registration.
   Scan the QR code or go to the link to download and install the App https://www.vicohome.io/download/

2. Add the device
   Sign in to App，connect to Wi-Fi and add the device according to the prompts (please bring the device close to the router when configuring).

Power on/off and network configuration

• Long press the power button for 3s to power on/off the device.
• Double-click the power button to enter the network configuration mode after the prompt tone.
  When connecting the camera for the first time, use the App and follow the instruction to configure the camera network.

Set up the camera

1. Click the “Add Camera Now” in the App and enter the Wi-Fi network name and password that you want the camera to connect. To ensure a longer distance connection, the camera only supports the 2.4Ghz Wi-Fi with stronger wall penetration capability and does not support Wi-Fi for enterprise-level authentication currently. Please ensure that the entered Wi-Fi meets the requirements. After completion, click “Continue” to generate the QR code for pairing the camera.
2. After pressing the camera switch for 3 seconds, the camera will turn on. At this moment, target the camera at the QR code of the mobile App, with a distance of about 20cm (about 7 inches) until the camera emits a “Di” sound, which represents the scanning is succeeded and the pairing is started.
3. After a while, the camera will give out a prompt sound of a successful connection. At this moment, please set the name for the device on the App and select the location you want to place the device. Click “Continue” to complete the pairing.

Possible problems with binding:

• When you hear the “Wi-Fi Password Error”, please check whether the Wi-Fi password you entered in the App is correct;
• When you hear the “Authentication error”, please ensure that your Wi-Fi network is not an enterprise-level network, and the device supports only the network with the security level below WPA-2;
• When you hear the “Wi-Fi not found”, please check whether you select or enter the correct Wi-Fi name, and place the device near the Wi-Fi router and ensure that the router is powered on. Please note that 5Ghz Wi-Fi cannot be searched by the device;
• When you hear the “Retrieving IP timeout”, it indicates that the number of devices connected to the router in your home is too many to connect more devices. Please remove some of the connected devices that are not commonly used or restart the router to clear the unconnected devices. You may need to contact the router administrator;
• When you hear the “Cloud service connection fail”, please check whether your router is connected properly to the external network.
• When you hear this error prompt,it is common on the condition of network disconnection or that the selected router in your home is a local area network server. Please ensure that the network connection is normal, and try to temporarily turn off the firewall toconnect again.

Install the camera

You can place the camera on a shelf or other surfaces to use, or you can install it on a wall to use.

1. Select a good spot for your camera
   Select a good spot for your camera, please install the camera in a position where its view is not blocked and ensure that it is within the coverage of the Wi-Fi network. The PIR infrared sensor is more sensitive to movements across the camera’s field of view than movements toward or away from the camera .

2. Install the bracket

   • Screw fixing:
     Use the drilling tool to punch holes on the wall according to the hole distance of the base. It is recommended to mark the holes on the wall with a pencil before drilling. Screw the expansion nut into the holes on the wall, and then connect the bracket to the expansion nut with screws to complete the fixing.

   • Fix the camera
     Align the bracket screw with the screw hole on the back or bottom of the camera, and then rotate it to the tightened state.

   • Adjust the angle
     Adjust the camera to an appropriate angle, the best angle is about 15 degrees downward， and then tighten the base by rotating it in clockwise direction to fix the angle.

Share the camera

When you need to view the camera with other family members or friends, you can use this function. Only the administrator whose account is bound with the camera for the first time can share and set the device. Other members can only view the live or playbacks of the device.

1. Find the camera you want to share on the App homepage or camera setting page. Find the button and enter the sharing page.
2. Click “Invite”, and a QR code will be generated for sharing.
3. For the members you need to share, find “Add Friend’s Camera” in the “User” page to enter the scanning page.
4. Scan the QR code on your mobile phone, and you will receive the confirmation notification after success. The sharing will be completed after you agree.

Charge the camera

The app will remind you to charge your camera when the battery is low. Please use the Micro USB cable to plug into the 5V/1.5A charging adapter to charge the camera. During charging, the camera’s indicator light is solid yellow, and when the camera is fully charged, the indicator light will turn into solid green. It will take 10 hours to fully charge the camera.

Indicator light status

Mode

|

Status

---|---

Working mode

|

Blue

Sleep mode

|

Off

Charging mode

|

Yellow

Fully charged mode

|

Green

Product specification

Item

|

Specification

---|---

Camera lens

|

Field of view: 110°

Image resolution

|

Max. 1920×1080

Video bit rate

|

Adaptive

Storage media

|

Micro SD card (Up to 128GB)

Battery capacity

|

5200mAh/6700mAh *

Adapter requirement

|

5V/1.5A

Size

|

675889（mm）

Firmware upgrade

When you connect your camera through the App, it will prompt you if the latest firmware is available. You can also manually check the firmware upgrade in the settings of the App. Please make sure that your camera is fully charged or connected to the power adapter before upgrading the firmware, please do not cut off the power supply during the upgrade.

Specifications

• PACKAGE DIMENSIONS: 39 x 3.86 x 2.64 inches
• ITEM WEIGHT: 12 ounces
• BATTERIES: 1 Lithium Ion batteries
• CONNECTIVITY TECHNOLOGY :Wireless
• SPECIAL FEATURE: Night Vision, Motion Sensor
• RECOMMENDED USES FOR PRODUCT: Indoor,Outdoor,Pet
• BRAND: Vision Well

FCC Warning

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. this device may not cause harmful interference.
2. this device must accept any interference received,including interference that may cause undesired operation.Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

To maintain compliance with FCC’s RF Exposure guidelines, this equipment should be installed and operated with minimum distance between 20cm the radiator your body: Use only the supplied antenna.

Frequently Asked Questions

With the app can you monitor more than 3 cameras at the same time?****

Yes

Can it be powered off/on to save battery life when the camera not needed?****

It will go into “power saving mode” when the camera’s not being used, the status changes to “online” when you’re viewing it or it’s recording something it spotted. If it stayed in “power saving mode” it would last a long time. Of course, you can also turn it off at the device.

I live in the north, how long does the battery last in winter weather?****

It all depends on how much movement or motion thats being recorded. The product has several different settings or you can customize the motion to be recorded. I have mine set on the highest setting and my dogs make it records all the time. I will charge it (1) once every other week just to make sure. It’s very easy to charge and to remove unless its out of hands reach to take down or put uo. Mine are in arms reach so very easy. I love having my cameras.

Can they both be synced to the same account if I buy three cameras?****

Yes, these security cameras wireless outdoor can be synced to the same account if your cameras both are Vision Well camera.

Can the siren and/or light be disabled when the camera picks up motion, and just be used to monitor the area?****

Yes it can you have total control.

For the color night vision to actually be color does it have to have the floodlight on or is it color night vision in a dark room?****

The night vision will be color in a dark room when you set the night vision to “color night vision”, and you doesn’t have to have the white spotlight on, because it’s just an alarm light.

Is the siren loud and clear?****

Yes, of course, but you can adjust the volume in the settings, and you can even warn off thieves through two-way talk.

Can I without buying a SD card?****

Yes. You do not need an SD card.

Can it record sound without having the motion detection set off. And what is the range of the wifi, I would like to mount one farther from the house.****

Yes

Can the battery be replaced?****

The battery is rechargeable; I do not believe it can be replaced.

Does it work with Smart Life or Tuya app?****

I don’t believe it does. I think it only works with Vicohome (it’s own platform). If it works with others I haven’t been able to find it.

Can the solar panels be used to keep the camera battery charged?****

Not really. The solar panel has to be plugged in to the camera which would require you to remove the weather-tight cover which protects the switches and jacks from weather and moisture. If the camera was inside, maybe.

Camera permission management: How to invite family and friends to use my camera together?

Open the App and select your camera on the home page. Click the share button on the home page or the “Share” in the camera settings to enter the sharing page, and then click “Invite ” to generate a QR code. Your friends can now get some of the access rights by scanning the QR code in your phone.

Why doesn’t the Wi-Fi name appear when I connect to Wi-Fi?

On Apple devices with iOS13 and above, you need to turn on the “location permission” for the app in the system settings and change it to “allow when using.”

Will the camera show red lights when night vision is activated?

The built-in infrared lamp beads make the camera only show some dim red lights when night vision is activated, but the image quality is still clear under no light environment.

What are the requirements for Wi-Fi?

Please use a 2.4GHz wireless network. The device does not support the 5GHz wireless network. Meanwhile, please set the Wi-Fi authentication method to WPA2-PSK or other lower level of security method. A password is required.

How far should the camera be placed from the router?

After testing, the Wi-Fi connection distance can normally reach up to 150 meters in the open area. However, the actual situation depends on the strength of Wi-Fi and its surrounding environment (thick walls, electromagnetic devices, large metal objects will all cause interference to the Wi-Fi signals). If the camera connection signal is weak or unstable, please place the camera as close to the router as possible.

What is the maximum length of recording time?

If you set the duration as “Auto”, when someone occurs in the view of the camera, it will start recording a video for up to 3 minutes.

How to quickly view videos by category?

Click the icon in the upper left corner of the “Library” page to start filtering videos by category. Select the category you want to see and then click “Save” to view the video playbacks.

What should I do when the device is in malfunction?

Long press the power bottom for 3 seconds to restart it. If there is no response, you can remove the rubber plug at the button of the camera. Press the reboot hole with a pointed object to restart the camera.

VISION WELL CG6S Security Cameras Wireless Outdoor Operational Manual.pptx

Vision Well 1080P Wireless Security Camera-Video

VISION WELL CG6S Security Cameras Wireless Outdoor Operational Manual

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>