SKYDANCE T4 Wall Mounted Touch Panel Instructions
- June 6, 2024
- SKYDANCE
Table of Contents
SKYDANCE T4 Wall Mounted Touch Panel
Wall Mounted Touch Panel
Model No.: T1, T2, T3, T4
1-4 color/Glass panel/Touch color wheel/DC input/4 channel constant voltage
PWM output/Wireless remote control
Features
- Touch panel single color, dual color, RGB or RGBW PWM constant voltage controller.
- Ultra sensitive high strength glass touch panel with touch color wheel in the middle and backlighting. ● Compatibility with RF 2.4G single zone or multiple zone remote control.
- Touch keys with LED indicator.
- White & Black glass panels are available.
Technical Parameters
Input and Output
Model| T1| T2| T3| T4
Input voltage| 12-24VDC| 12-24VDC| 12-24VDC| 12-24VDC
Input current| 12.5A| 12.5A| 12.5A| 12.5A
Output voltage| 4 x (12-24)VDC| 4 x (12-24)VDC| 3 x (12-24)VDC| 4 x (12-24)VDC
Output current| 4CH,3A/CH| 4CH,3A/CH| 3CH,4A/CH| 4CH,3A/CH
Output power| 144-288W| 144-288W| 144-288W| 144-288W
Output type| Constant voltage| Constant voltage| Constant voltage| Constant
voltage
Light type| Single color| Dual color| RGB| RGBW
Environment
Operation temperature| Ta: -30 OC ~ +55 OC
Case temperature (Max.)| T c: +85OC
IP rating| IP20
Warranty and Protection
Warranty| 5 years
Protection
| Reverse polarity
Over heat
Short circuit
Key function
T1 Single color panel
T2 Dual color panel
T3 RGB panel
T4 RGBW panel
Turn on key tone:
Long press power key for 5s when light is off, will turn on or turn off key
tone.
Wiring diagram
T1 Single color panel
T2 Dual color panel
T3 RGB panel
T4 RGBW panel
LED power supply voltage and power select :
- 12V lamp, Input 12V power supply, can load 0~144W,
- 24V lamp, Input 24V power supply, can load 0~288W, The power supply power must larger than load power 20%.
Match Remote Control (two match ways)
The touch panel controller can also match with the RF remote (optional). End
user can choose the suitable match/delete ways. Two options are offered for
selection:
Use On/Off key
Match: Turn on light, turn off, immediately press the On/Off key of the panel
for 5s, then press on/off key (single zone remote) or zone key (multiple zone
remote) of the RF remote within 5s. The LED indicator fast flash 3 times means
match is successful.
Delete:
Turn on light, turn off, immediately press the On/Off key of the panel for
10s, delete all matched RF remote. The LED indicator fast flash 6 times means
all matched remotes were deleted.\
Use Power Restart
Match:
Switch off the power, then switch on power again, immediately short press
on/off key (single zone remote) or zone key (multiple zone remote) 3 times on
the remote. The light blinks 3 times means match is successful.
Delete:
Switch off the power, then switch on power again, immediately short press
on/off key (single zone remote) or zone key (multiple zone remote) 5 times on
the remote. The light blinks 5 times means all matched remotes were deleted.
RGB/RGBW dynamic mode list (only for T3 / T4)
| No. | Name | No. | Name |
|---|---|---|---|
| 1 | RGB jump | 6 | RGB fade in and out |
| 2 | RGB smooth | 7 | Red fade in and out |
| 3 | 6 color jump | 8 | Green fade in and out |
| 4 | 6 color smooth | 9 | Blue fade in and out |
| 5 | Yellow cyan purple smooth | 10 | White fade in and out |
Mechanical Structures and Installations
