PedSafety 906-0021 Mastered Traffic Control Cabinet User Guide
- June 6, 2024
- PedSafety
Table of Contents
Audible Beacon Device
Wiring Quick Guide
906-0021 Mastered Traffic Control Cabinet
SCAN ME:
User Manual
Installation Manual
https://www.dropbox.com/scl/fo/x24d8uxsp8intkfhib0x7/AOVTAQaZCp66MCWWhVN5Lq8?rlkey=9pwy7b90tm8fa9vbgaz2qnp4h&st=19fwjh07&dl=0
SPI in the Pedestrian Signal Head (Signal Power Interface)
DO NOT set the SPI on the bottom of the pedestrian signal head.
Terminals of the SPI must be connected to the same terminals on the base
station.
Traffic Control Cabinet
✓ Utilizes the existing field wires from cabinet to pedestrian push buttons to
place calls from Guardian or pedestrian push button.
✓ NOT polarity dependent. NOTE: For NEW intersection installations, in the
absence of city or other local specifications, PedSafety recommends IMSA 50-2
14-gauge loop lead-in wire.
Audible Beacon Device Wiring
(enlarged view of the terminal block on the back)
Doc # 906-0021 Rev F
For complete documentation visit:
https://www.pedsafety.com/product-guides-and-manuals/
©PedSafety 2024
PedSafety Tech
Support:208-345-7459
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>