PedSafety Actuated BBU APS Beacon Installation Guide
- June 16, 2024
- PedSafety
Table of Contents
**PedSafety Actuated BBU APS Beacon Installation Guide
**
SPI in the Pedestrian Signal Head (Signal Power Interface)
WARNING 120 VAC Inputs
Do NOT set the SPI on the bottom of the Pedestrian Signal Head.
Terminals of the SPI must be connected to the same terminals on the Base
Station.
Cabinet
NOTE: For NEW intersection installations, in the absence of city or other
local specifications, Campbell Company recommends IMSA 14 Gauge (loop detector
wire).
For complete documentation visit http://www.pedsafety.com/product-
installation-guides/
©Campbell Company 2016
Tech Support: 208-345-7459, option
2
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>