LINDY 38262 70m Cat.6 4 Port HDMI 4K60 Splitter Extender User Manual
- June 5, 2024
- LINDY
Table of Contents
LINDY 38262 70m Cat.6 4 Port HDMI 4K60 Splitter Extender
Safety Instructions
WARNING !
Please read the following safety information carefully and always keep this
document with the product. Failure to follow these precautions can result in
serious injuries or death from electric shock, fire or damage to the product.
Touching the internal components or a damaged cable may cause electric shock,
which may result in death. This device is a switching type power supply and
can work with supply voltages in the range 100 – 240 VAC For worldwide
usability four different AC adapters are enclosed: Euro type, UK type,
US/Japan type and Australia/New Zealand type. Use the appropriate AC adapter
as shown in the picture and ensure it is firmly secured in place and does not
detach by pulling before installing into a power socket. To reduce risk of
fire, electric shocks or damage:
- Do not open the product nor its power supply. There are no user serviceable parts inside.
- Only qualified servicing personnel may carry out any repairs or maintenance.
- Never use damaged cables.
- Do not expose the product to water or places of moisture.
- Do not use this product outdoors it is intended for indoor use only.
- Do not place the product near direct heat sources. Always place it in a well-ventilated place.
- Do not place heavy items on the product or the cables.
- Please ensure any adapters are firmly secured and locked in place before inserting into a wall socket
Instructions for Use of Power Supply
Attach the required adapter to the plug. Push the adapter firmly, twist
until the latch secures the adapter. To remove, push the button and twist in
the opposite direction.
Introduction
Thank you for purchasing the 70m Cat.6 4 Port HDMI 4K60 Splitter Extender. This product has been designed to provide trouble free, reliable operation. It benefits from both a LINDY 2-year warranty and free lifetime technical support. To ensure correct use, please read this manual carefully and retain it for future reference.
Package Contents
- 70m Cat.6 4 Port HDMI 4K60 Splitter Extender
- 4 x Cat.6 HDMI Receivers
- IR Emitter Cable, 1.2m
- 4 x IR Receiver Cable, 1.2m
- 2 x Transmitter Mounting Brackets & Screws
- 8 x Receiver Mounting Brackets & Screws
- 12VDC 2A Multi-country Power Supply (UK, EU, US & AUS), Barrel Size: 5.5/2.1mm
- Lindy Manual
Features
- Distribute HDMI signals to up to 4 displays in multiple locations.
- Supports resolutions up to 4K@60Hz, with additional support for HDR.
- Features a loop-through HDMI output on the transmitter for local monitoring or cascading up to 3 levels for larger installs.
- Control using an IR remote from the receiver locations.
- Supports Power over Cat.6 (PoC) to the receivers, only a single power supply is required for operation.
Specification
- Interface Standard: HDMI 2.0
- Supported Bandwidth: 18Gbps
- Maximum Distance: 70m (229.66ft)
- Maximum Resolution: 3840×2160@60Hz 4:4:4 8bit
- HDCP Support: 2.2
- EDID Pass-through
- Supported Audio Formats: 2CH, up to 5.1 copying EDID from loop out port
- IR Support: 20-60KHz
- Chipset: GSV2006 & GSV5100
- Housing Material: Metal
- Operating Temperature: 0°C – 50°C (32°F – 122°F)
- Storage Temperature: -10°C – 80°C (14°F – 176°F)
- Humidity: 5 – 90% RH (non-condensing)
- Power Consumption: Splitter Extender: 5.2W, Receiver: 1.6W
- Colour: Black
Connectors
- Transmitter Input: HDMI Type A (Female)
- Transmitter Output: 4 x RJ-45 (Female), HDMI Type A (Female), 3.5mm IR (Female)
- Receiver Input: RJ-45 (Female), 3.5mm IR (Female)
- Receiver Output: HDMI Type A (Female)
Product Overview
Extender Splitter, Transmitter
- 12VDC: Connect and secure the included power supply.
- IR Out: Transmit IR control to the connected display using the included IR emitter cable.
- HDMI In: Connect to an HDMI source device using HDMI cable.
- HDMI Out: Connect to a local HDMI display, or alternatively connect up to 2 further 38262 units for larger scale distribution.
- Cat Out 1-4: Connect to the receiver units using Cat.6 or above cable.
- Reset Push Button: Press once to reset the system and all connections.
- Power LED: Indicates power of the transmitter.
- Power Switch: Push to manually switch the system on or off.
Receiver
- 12VDC: Connect a suitable power supply (optional).
- HDMI Out: Connect to an HDMI display
- IR In: Receive IR control from an IR remote using the included IR receiver cables.
- Reset Push Button: Press once to reset the system and all connections.
- Cat In: Connect to the transmitter unit using Cat.6 or above cable.
- Power LED: Indicates power of the receiver.
Installation
There is no display on the screen.
It has been found that there are significant differences in the cable
lengths/types and even input ports which can be used on different brands of
display using HDMI resolutions. If problems are
experienced, please apply the following steps:
- Reset the splitter extender or receiver unit using the reset push button.
- Try a different input port on the display.
- Reduce the cable length on the Input and Output to 1m.
- Try a different type of 1m HDMI Cable.
- Check that the DC plug and jack used by the external power supply is firmly connected.
- Check that the Cat.6 or above cable is connected correctly.
- Power off all the devices, then power on in this order: first, the splitter unit, then the display and finally the source.
- For some HDMI devices it may be helpful to unplug and re-connect their HDMI connection to re-initiate the HDMI handshake and recognition.
- Reduce the length of Cat.6 or HDMI cable used or use a higher quality cable.
Lindy regularly checks and tests our product range to ensure maximum compatibility and performance. For the most up to date version of this manual, please refer to your local Lindy website, search for the relevant part number and find the manual under Downloads. For further assistance please contact your local Lindy Technical Support team. Details can be found at your local Lindy website.
Recycling Information
In 2006 the European Union introduced regulations (WEEE) for the collection and recycling of all waste electrical and electronic equipment. It is no longer allowable to simply throw away electrical and electronic equipment. Instead, these products must enter the recycling process. Each individual EU member state, as well as the UK, has implemented the WEEE regulations into national law in slightly different ways. Please follow your national law when you want to dispose of any electrical or electronic products. More details can be obtained from your national WEEE recycling agency.
FCC Statement
CE Certification
LINDY declares that this equipment complies with relevant European CE
requirements.
CE Konformitätserklärung
LINDY erklärt, dass dieses Equipment den europäischen CE-Anforderungen
entspricht
UKCA Certification
LINDY declares that this equipment complies with relevant UKCA requirements.
FCC Certification
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. You are cautioned that changes or modifications not
expressly approved by the party responsible for compliance could void your
authority to operate the equipment. This device complies with part 15 of the
FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- This device must accept any interference received, including interference that may cause undesired operation.
The enclosed power supply has passed Safety test requirements, conforming to the US American versions of the International Standard IEC 60950-1 or 60065 or 62368-1.
Manufacturer (UK):
LINDY Electronics Ltd
Sadler Forster Way
Stockton-on-Tees, TS17 9JY
England sales@lindy.co.uk,
T: +44 (0)1642 754000
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>