LINDY 38225 HDMI Over Powerline Extender User Manual

LINDY 38225 HDMI Over Powerline Extender

Safety Instructions

WARNING!

Please read the following safety information carefully and always keep this document with
the product.
Failure to follow these precautions can result in serious injuries or death from electric
shock, fire or damage to the product.
This device can work with supply voltages in the range 100…240 VAC.
Touching the internal components or a damaged cable may cause electric shock, which may result in death.

To reduce risk of fire, electric shocks or damage:

• Do not open the product. There are no user-serviceable parts inside.
• Only qualified servicing personnel may carry out any repairs or maintenance.
• Never use damaged cables.
• Do not expose the product to water or places of moisture.
• Do not use this product outdoors it is intended for indoor use only.
• Do not place the product near direct heat sources. Always place it in a well-ventilated place.
• Do not place heavy items on the product or the cables.
• Please ensure any cables are firmly secured and locked in place before inserting into a power socket

Introduction

Thank you for purchasing the HDMI over Powerline Extender. This product has been designed to provide trouble-free, reliable operation. It benefits from both a LINDY 2-year warranty and free lifetime technical support. To ensure correct use, please read this manual carefully and retain it for future reference. The Lindy HDMI over Powerline Extender is a 2-part high-quality solution for extending HDMI content from a source device to a display using a single electrical power circuit. This extender provides simple, hassle-free content distribution within a small offices, storefronts or residential setups.

Package Contents

38225

• HDMI over Powerline Extender, Transmitter
• IR Emitter Cable, 1.5m
• Multi-country to C5 Power Cables (UK, EU, US & AUS)
• Lindy Manual

38227

• HDMI over Powerline Extender, Receiver
• IR Receiver Cable, 1.5m
• Multi-country to C5 Power Cables (UK, EU, US & AUS)
• Lindy Manual

Features

• Extends HDMI signals over a single powerline circuit
• Transmit content to 3 compatible receivers, as well as to a local HDMI display via a loop out connection
• Supports resolutions up to Full HD 1920×1080@60Hz
• Supports audio pass-through up to LPCM 2CH
• Control the HDMI source device from the display side using an IR remote

Specification

• Interface Standard: HDMI 1.3
• Supported Bandwidth: 6.75Gbps
• Maximum Resolution: 1920×1080@60Hz 4:4:4 8bit
• HDCP Support: 1.4
• EDID Pass-Through: Pass-through
• Supported Audio: LPCM 2CH
• IR Support: 20-60kHz
• Transmission Medium: IEC C6
• Chipset: ITE
• Housing Material: Metal
• Operating Temperature: 32°C – 104°C (90°F – 219°F)
• Storage Temperature: -4°C – 104°C (25°F – 219°F)
• Humidity: 20 -90% RH (non-condensing)
• Power Requirements: 100-240VAC 50/60Hz
• Power Consumption: Transmitter – 3.4W, Receiver – 3.5W
• Colour: Black
• Human body model — ±8kV (Air-gap discharge) & ±4kV (Contact discharge)

Connectors

• Transmitter Input: HDMI Type A (Female)
• Transmitter Output: HDMI Type A (Female), 3.5mm IR (Female), IEC C6 (Male)
• Receiver Input: 3.5mm IR (Female), IEC C6 (Male)
• Receiver Output: HDMI Type A (Female)
• Power: IEC C6 (Male)

Product Diagram

**Transmitter

**

• Power LED: This LED will illuminate when transmitter is connected to a power source.
• Link LED: The LED will flash quickly to indicate pairing has been successful. This LED will illuminate intermittently 3 times to indicate pairing has been unsuccessful.
• Reset Button: Push for 3 seconds to reset the transmitter to default settings.
• 240VAC: Connect to a 100-240VAC power source using the included AC cable.
• HDMI Out: Connect to a local HDMI display.
• HDMI In: Connect to an HDMI source device.
• IR Out: Connect the IR emitter cable for control of the HDMI source device and place the IR eye in clear line of sight of the source device’s IR receiver.

**Receiver

**

• Power LED: This LED will illuminate when the receiver is connected to a power source.
• Link LED: The LED will flash quickly to indicate pairing has been successful. This LED will flash slowly to
• indicate pairing has been unsuccessful.
• Reset Button: Short press to copy the EDID of the display to the source device connection. Press and hold for 3 seconds to restore the transmitter to default settings.
• 240VAC: Connect to a 100-240VAC power source using the included AC cable.
• HDMI Out: Connect to an HDMI display.
• IR In: Connect the IR receiver cable to transmit IR control signals from the display side.

IR Pin Diagram

CE/FCC Statement

CE Certification
LINDY declares that this equipment complies with relevant European CE requirements.

UKCA Certification
LINDY declares that this equipment complies with relevant UKCA requirements.

FCC Certification
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
You are cautioned that changes or modifications not expressly approved by the party responsible for compliance could void your authority to operate the equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that may cause undesired operation.

The enclosed power supply has passed Safety test requirements, conforming to the US American versions of the international Standard IEC 60950-1 or 60065 or 62368-1.

Hersteller / Manufacturer (EU):

• LINDY-Elektronik GmbH
• Markircher Str. 20
• 68229 Mannheim
• Germany
• Email: info@lindy.com 
• T: +49 (0)621 470050

Manufacturer (UK):

• LINDY Electronics Ltd
• Sadler Forster Way
• Stockton-on-Tees, TS17 9JY
• England
• sales@lindy.co.uk
• T: +44 (0)1642 754000

Recycling Information

Europe, United Kingdom
In 2006 the European Union introduced regulations (WEEE) for the collection and recycling of all waste electrical and electronic equipment. It is no longer allowable to simply throw away electrical and electronic equipment. Instead, these products must enter the recycling process.
Each individual EU member state has implemented the WEEE regulations into national law in slightly different ways. Please follow your national law when you want to dispose of any electrical or electronic products. More details can be obtained from your national WEEE recycling agency.

References

• Lindy Electronics

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>