SKYDANCE PH-75-12 RF 1-4 Channel Constant Voltage LED Driver User Manual

RF 1-4 Channel Constant Voltage LED Driver
Model No.: PH-75-12, PH-75-12-2, PH-75-12-3, PH-75-12-4
PH-75-24, PH-75-24-2, PH-75-24-3, PH-75-24-4

Features

• Dimmable LED driver with RF control, apply to a single color, dual color, or RGB/RGBW LED constant voltage strips
• Match with RF 2.4G single color, dual color, and RGB/RGBW remote. One RF LED driver accepts up to 10 remote controls
• Universal AC input / Full range
• 1/2/3/4 channel constant voltage output, Max. total output power 75W
• Built-in active PFC function: 0.95 Typ
• When using RGB/RGBW light, built-in 10 dynamic modes, including jump or gradual change style
• Auto-transmitting function: LED driver automatically transmits a signal to another LED driver with a 30m control distance
• Synchronize on multiple LED drivers
• Over-heat / Over-load / Short circuit protection, recover automatically
• Full protective plastic case
• Suitable for indoor LED lighting application
• 5 Year, 50,000hr warranty

Product Size

Accessories

Technical Parameters

.56A. x 4Chi
Output Power| Max. 75W
Dimming Range| 0-100%
PWM Frequency| 390011z
Ripple & Noise| < 220mV
Overload Power limitation| > 120-150%
Input| InFul Voltage Rage| 100–240VAC
Frequency Ronge| 50/60Hz
Abernathy Current| 0.86A/115VAC, 0.38A/230VAC
Power Facia| PF >0.99/110VAC PF>0.95/230VAC, at Kal cod
THD| 110VACOTHD <10% 230VACCITHD<16%
Efficiencyltyp I| BB%
Inrush Current| Colt star 35A at 230VAC
Anti Surge| EN: 1KV
leakage Current| < 05mA
Protection| Over toad Power| Shut down the coo when current load > 120% -.15096, out recorders.
New Voltage| SNA down the output when nonfood > 13V, out recovers.
Shoe Ckcull| Sid down ovamaicoly if short ckcuN occurs, our recovers.
Over Temperature| Inteligendy odium Or Wm if the corm current I the KB temp > 100t, out meows.
Environment| Working Temperature| – 30t–50t
‘loose Max| 80t
VVorkirg Humidity| 2096–90%RH, non-condensing
%rage Temperokxe/Humidity| .40t –80t, 10%–95%RH
Temperable Coefficient| ±0.03%/t 10.50%)
Vibration Resistance| 10-500Hz, 2G, 6min/eyelet, X,Y,Z axes/2min
IP Rating| P20
Safely& EMC| Stay Speelieotions| EC/EN61347.1 . IEC/EN61347.2.1 3
Withstand Voltage| VPO/P: 3750VAC
insulation Resisiorce| VPO/P: 100MQ/503VDC/25t/7096RH
EMC Emission| EN55015, EN610003.2 Gass C, EC610003-3
EMC Irerranity| EN6100042.3.4.5.6. 8.11, EN61547
Certifications| CE, ENC**
Model| PH-75-24| PH-75-24-2| PH-75-24-3| PH-75-24-4
---|---|---|---|---
Output| Type| Dimming| Color temperature| RGB| RGBW
Output Voltage| 24VDC ± 0.5VDC
Output Current| 3.125A        I| 1.56A x 2CH I| 1.04A x 3CH| I     0.78A x 4CH
Output Power| Max. 75W
Dimming Range| 0•100%
PWM Frequency| 3900Hz
Ripple & Noise| ca; 330mV
Overload Power Limitation| >120-150%
Input| Input Voltage Range| 100-240VAC
Frequency Range| 50/60Hz
Alternating Current| 0.84A/115VAC, 0.37A/230VAC
Power Factor| PF>0.99/110VAC      PF>0.95/230VAC, at full load
THD| 110VACGTHDic 10% 230VACOTHEK 16%
Ef ficiencyltyp.1| 90%
Inrush Current| Cold sort 38A at 230VAC
Anti Surge| L-N: 1KV
Leakage Current| <0.5mA
Protection| Over Load Power| Shut down the output when the current load > 120%-150%, auto recovers.
Over Voltage| Shut down the output when non-load > 26V, auto recovers.
Short Circuit| Shut down automatically if a short circuit occurs, aub recovers.
Over Temperature| Intelligently adjust or turn off the output current if the PCB temp > 100t, auto recovers.
Environment| Working Temperature| -30°C–50°C
Tcase Max| 80°C
Working Humidity| 20 %.–90%RH, non-condensing
Storage Temperature/Humidity| -40°C–80°C, 10%–95%RH
Temperature Coefficient| ±0.03%/°C {0-50 %I
Vibration Resistance| 10-500Hz, 2G, 6min/cycle, X,Y,Z axes/2min
IP Rating| IP20
Safety&EMC| Security Specifications| IEC/EN61347-1, IEC/EN61347-2-13
Withstand Voltage| I/P-0/P: 3750VAC
Insulation Resistance| I/P-0/P: 100MQ/500VDC/25t/70%RH
NC Emission| EN55015, EWA 000-3-2 Class C, 1E051000-3.3
ENC Immunity| EN610004-2.3.4.5.6.8.11, EN61547
Certifications| CE, EMC

Wiring Diagram

Note:

1. The wiring arrows must be in the same direction.
2. Use above no. 22 wire to connect this product.

Wiring denition:

System wiring

Match Remote Control

Use power restart to match the LED driver and RF remote,
The LED driver of different light types matches the RF remote of the corresponding light type.
Match:
Switch off the power, then switch on power again,
immediately short press the on/off key (single-zone remote) or zone key (multiple zones remote) 3 times on the remote.
The light blinks 3 times means the match is successful.
.Delete:
Switch off the power, then switch on power again, immediately short press the on/off key (single-zone remote) or zone key (multiple zones remote) 5 times on the remote.
The light blinks 5 times means all matched remotes were deleted.

RGB/RGBW Dynamic mode list

Application notes

1. All LED drivers are in the same zone.
   Auto-transmitting: One LED driver can transmit the signals from the remote to another LED driver within 30m, as long as there is a LED driver within 30m, the remote control distance can be limitless.
   Auto-synchronization: Multiple LED drivers within a 30m distance can work synchronously when they are controlled by the same remote, under the same dynamic mode, and at the same speed.
   LED driver placement may offer up to 30m communication distance. Metals and other metal materials will reduce the range.
   Strong signal sources such as WiFi routers and microwave ovens will affect the range.
   We recommend for indoor applications that LED driver placements should be no further apart than15m.

2. Each LED driver(one or more) is in a different zone, like zone 1, 2, 3, or 4.

Dual-color control

WW=Warm white LED
CW=Cool white LED
Each channel can supply up to 75W and the white balance can be controlled as such:

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>