Chargers RNY-X23-BL 3-in-1 Charging Station Instruction Manual
- June 5, 2024
- Chargers
Table of Contents
Chargers RNY-X23-BL 3-in-1 Charging Station
OVERVIEW
- Please charge the product with Type-C fast charging cable and 5V/2.4A adapter.
- When connected to the power, the indicator light shows blue light is always on.
- Insert the mobile phone into the lightning output port to charge the mobile phone. Place your Apple Watch in the magnetic charging stand (it is recommended to fix your watch band to the smallest size), and the watch will charge.
- Insert the AirPods case into the lightning output port to charge the AirPods.
To ensure the safe and efficient charging of three devices at the same time, please use at least a 5V/2.4A adapter and a fast charging cable. (If you use 5V/2A adapter, the product may not be able to charge three devices at the same time)
Product Specifications
- Input: 5V/2.4A.
- Power: iPhone 10W. AirPods,AirPods Pro 5W. iWatch 2.5W.
- Input port: USB-C
Package List
- 3 in 1 charging stand × 1
- Power adapter × 1
- Charging cable × 1
- User manual × 1
FCC WARNING
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.Any changes or
modifications not expressly approved by the party responsible for compliance
could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation.If this equipment does cause harmful
interference to radio or television reception,which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help. To maintain compliance with FCC’s RF Exposure guidelines, This equipment should be installed and operated with minimum distance between 20cm the radiator your body: Use only the supplied antenna.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>