SKYDANCE RS1 Touch Wheel RF Remote Controller Instruction Manual
- June 5, 2024
- SKYDANCE
Table of Contents
Touch Wheel RF Remote Controller
Model No.: RS1/RS2/RS6
13-Key/4 Zone/Touch color wheel/Wireless remote 30m distance/AAAx2 battery/Magnet stuck fix
Features
- Apply to a single color or dual color LED controller.
- Ultra sensitive color adjustment touch wheel.
- Each remote can match one or more receivers.
- AAAx2 battery powered.
- Operate with LED indicator light.
- Magnet on the back which can be stuck on the back holder.
Technical Parameters
Input and Output
Output signal| RF 2(.4GHz)
Working voltage| 3VDC (AAAx2)
Working current| <5mA
Standby current| <10μA
Standby time| 1 year
Remote distance| 30m(Barrier-free space)
Environment
Operation temperature| Ta: -30ºC ~ +55ºC
Case temperature (Max.)| T c: +85ºC
IP rating| IP20
Safety and EMC
EMC standard (EMC)| EN301 489,EN 62479
Safety standard(LVD)| EN60950
Radio Equipment(RED)| EN300 328
Certification| CE,EMC,LVD,RED
Warranty
Warranty| 5 years
Weight
Gross weight| 0.057kg
Net weight| 0.111kg
Mechanical Structures and Installations
To fix the remote, three options are offered for selection:
Option 1: stuck the remote on any metal surfaces directly.
Option 2: fix the remote’ bock holder on the wall with two screws.
Option 3: adhere the remote bock holder to the wall with a poster.
Operation
- When turning on the light, the indicator displays blue. when turning off the light, the indicator display red.
- When touching the color wheel, the indicator will display the some
- When the press or touch operation is invalid (If the light is off), the indicator display red.
- To extend battery life, no touch or press key operation after a few seconds, the touch wheel will enter a sleep state, you need to press any key to make the touch wheel quit sleep stole.
Match Remote Control (two-match ways)
End-user can choose the suitable match/delete way. Two options are offered for selection:
Use the controller’s Match key
Match: Short press match key, immediately press zone on the key of the remote. The LED indicator fast flash o few times means the match is successful.
Delete: Press and hold the match key for 5s to delete all match, The LED indicator fast flash a few times means all matched remotes were deleted.
|
Use Power Restart
Moth: Switch off the power, then switch on power again, immediately short press zone on key 3 times on the remote. The light blinks 3 times means the match is successful.
Delete: Switch off the power, then switch on power again, immediately short press zone on key 5 times on the remote. The light blinks 5 times means all matched remotes were deleted.
---|---
Key function
-
RS1 4 zone dimmer remote
-
RS2 4 zone color temperature remote
-
RS6 4 channel dimming remote
Safety information
-
Read all instructions carefully before you begin this installation.
-
When installing the battery, pay attention to the battery’s positive and negative polarity.
A long time without the remote control, remove the battery.
When remote distance becomes smaller and insensitive, replace the battery. -
If no response from the receiver, please re-match the remote.
-
Gently handle the remote, beware of falling.
-
For indoor and dry location use only.
User Manual
Ver 1.0.4
Documents / Resources
|
SKYDANCE RS1 Touch Wheel RF Remote
Controller
[pdf] Instruction Manual
RS1, RS2, RS6, Touch Wheel RF Remote Controller
---|---
|
SKYDANCE RS1 Touch Wheel RF Remote
Controller
[pdf] Instruction Manual
RS1, RS6, Touch Wheel RF Remote Controller, RF Remote Controller, Touch Wheel
Controller, Remote Controller, Controller