SCUBAPRO 60.316.200 Sport Dry Light DrySuits User Manual
- June 5, 2024
- SCUBAPRO
Table of Contents
SCUBAPRO 60.316.200 Sport Dry Light DrySuits
WARNING
SCUBAPRO STRONGLY RECOMMENDS ALL DIVERS UNDERGO TRAINING AND FAMILIARIZATION
WITHA CERTIFIED INSTRUCTOR BEFORE USING THIS PRODUCT.
The following are important safety guidelines every diver should adopt before
diving in a drysuit:
- Follow a complete drysuit diving course with a certified instructor and from an officially recognized approved training agency.
- Always dive with a buoyancy compensator.
- Become familiar with all your equipment before diving.
- Practice drysuit diving skills in safe conditions until confident of your ability.
- Ensure your buddy is completely familiar with and understands all your drysuit diving systems.
- Weight should be set to achieve neutral buoyancy with an empty tank. Do not add more weight than this. You should be able to achieve a 5 minute safety stop at 3 meters (10 feet), neutrally buoyant with a tank containing around 30 bar (500 psi) or less.
- Inspect the zipper, seals and valves for damage before each dive.
- Perform regular preventative maintenance on the suit, valves, zipper and seals.
- Only allow qualified individuals or Authorized Dealers to perform service on the suit.
- Understand your personal diving limitations. Do not exceed them. MOD – Max Operating Depth. The European Norm EN 250 norms restrict the depth to 50 meters for recreational diving. For technical diving, the MOD is well beyond the recreational diving limits.
- Never depend on any drysuit as your sole source of flotation and buoyancy control. Always dive with a suitable buoyancy control device equipped with a separate inflation system.
- Clothing or foreign objects caught between the zipper teeth will cause them to separate, destroying the waterproof integrity of the zipper. This damage is permanent and is not repairable. Have your buddy exercise care when closing and opening the zipper.
- Blood flow can be restricted by seals that are too tight, which can ultimately lead to injury or death. Do not wear the seals too tight.
- Determine if you have a latex allergy, and to what extent before purchasing or using a drysuit with latex seals.
- Learn your own limitations and learn to recognize the discomfort as a danger signal. Avoid hyperthermia & hypothermia as both can be harmful or fatal. Monitor your work rate during all diving activities to avoid excessive air consumption, fatigue, overheating and other symptoms.
- Buoyancy control in a drysuit is more complex than in a wetsuit and is a vital skill to be learned during the instruction in the use of a drysuit.
- Do not use glass objects to plug the neck or wrist seals. Occasionally, the internal pressure will blow the plug out of the seal. Glass can shatter, causing injury.
- Unauthorized repairs and /or modifications to the drysuit will void the warranty and possibly cause the suit to fail to perform properly, resulting in serious injury or death. Always take the suits to an authorized SCUBAPR0 dealer for this work.
- Unauthorized changes or damages resulting from the installation of a urination system will void the warranty.
- Do not remove the stitched labels. Labels show mandatory information about the product and production dates. Proof of purchasing date or production date will be needed in case of warranty claim.
- Drysuits in general provides thermal insulation by creating an air space between the diver and the cold water.
DRYSUITS KEY SPECIFICATIONS
This manual describes two types of SCUBAPRO drysuit styles, neoprene and Trilaminate. All suits share several basic features, including the main waterproof zipper inflation and exhaust valves, low pressure inflator hose, vulcanized neoprene boots, neoprene ho0d and bag. Some models are equipped with a specific repair kit.
NEOPRENE
Neoprene suits are constructed of 4mm compressed foam neoprene, laminated with
nylon jersey on both sides. The exterior side is a heavier weave to better
withstand wear and abrasion, while the inside is designed for comfort. The
compressed foam neoprene is very dense, resisting compression at depth. This
means the suit loses a smaller percentage of its surface buoyancy, requiring
less air added to remain neutral, and also retains more thermal efficiency at
depth. Unlike the Trilaminate, the neoprene has inherent thermal protection
and buoyancy right in the material and generally requires less added
insulation worn under the sut than the Trilaminate, for any given conditions.
Every seam receives an application of three coats of neoprene adhesive. The
outside is sewn with a twWO- thread locking blind stitch, while the inside is
reinforced with a proprietary liquid polymer that penetrates the interior
nylon layer and fuses to the neoprene itself. This creates a tough and long-
lasting waterproof seam.
TRILAMINATE
The Trilaminate suits are constructed of three-layer fabric (hence the name
tri-laminate). The suit is first sewn together, then the inside surface of the
seam is treated with waterproof tape. This provides an extremely dry and
reliable construction. The Trilaminate material has neither inherent buoyancy
nor thermal protection, it is only a dry barrier between the diver and the
aquatic environment. This style, known as a “membrane” suit, provides a
waterproof shell under which the diver can wear the correct choice of
undergarments suit to the conditions. The suit is more flexible than neoprene
and allows the diver a broader comfort range (especially in warmer
temperatures) than neoprene.
APPLICATIONS FOR USE
Both the Neoprene and Trilaminate drysuits are made of the finest materials
and to extremely high standards of workmanship. However, they must be used
within reasonable limits.
WARNING – DO NOT:
- Forget appropriate Underwear to prevent thermal insulation loss, especially at depth.
- Exceed the maximum depth to which you are currently certified.
- Use the drysuits in toxic or hydrocarbon-rich environments.
- Use the drysuit as a buoyancy lifting device.
- Use the drysuit without a separate buoyancy control device.
- Use inflation gases other than air except for argon.
- Use the suit with any weight harness or other weight system that is not equipped with a quick-release system
FITTING THE SUIT
A proper fit in a drysuit is very important. Too loose a fit will allow such
hazards as too much air moving around in the suit, difficult buoyancy control
and if the legs are too long, the boots can slip off the divers’ feet. Seals
that are too lo0se will leak. Too tight a fit can result in restriction of
blood flow causing loss of feeling in the extremities, or lack of oxygen to
the brain. Seals that are too tight will also restrict blood flow.
POSSIBLE ALLERGY REACT
A small percentage of people have an allergic reaction to natural latex, the
material from which the neck & wrist seals of some models are manufactured.
This allergy can range from mild to severe skin rash and itching. It is the
responsibility of the user to pre-determine if he or she has a Latex allergy,
or to recognize it during use, and discontinue Use of the suit until the
problem can be rectified. This usually means removing the latex seals and
installing new seals made of alternative materials. In addition to the
possible allergic reaction to latex used in the neck and wrist seals, a small
percentage of the population is known to experience an allergic reaction to
neoprene. Although this is less of a problem with dry suits than with wet
suits, as the diver normally wears an undersuit to separate the dry suit from
his or her body, some exposure can still result. Be sure to determine you are
free from neoprene allergy before purchasing any neoprene product.
WHAT IS LATEX ALLERGY?
Latex allergy is a reaction to certain proteins in latex rubber. The amount of
latex exposure needed to produce sensitization or an allergy reaction is
unknown. Increasing the exposure to latex proteins increases the risk of
developing allergic symptoms. In a sensitized persons, symptoms usually begin
within minutes of exposure, but they can occur hours later and can be quite
varied. Mild reactions to latex involve skin redness, rash, hives or itching.
More severe reactions may involve respiratory symptoms such as runny nose,
sneezing, itchy eyes, scratchy throat and asthma (difficult breathing,
coughing spells, and wheezing) Rarely, shock may occur; however, a life-
threatening reaction is seldom the first sign of latex allergy.
SOURCE OF STANDARD
Diving drysuits (Neoprene and Trilaminate): EN 14225-2:2017 and DIN EN
14225-2:2018
SOURCE OF REQUIREMENT
scubapro.eu
FIND DECLARATION OF CONFIRM & COMPLETE INSTRUCTION GUIDE AT:
https://www.scubapro.com
https://www.scubapro.com/manuals
References
- scubapro.com
- scubapro.eu
- uwatec.com
- scubapro.com
- scubapro.com
- scubapro.com/manuals
- scubapro.com/priručnici
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>