SCUBAPRO G2 Wrist Dive Computer User Guide
- June 5, 2024
- SCUBAPRO
Table of Contents
- SCUBAPRO G2 Wrist Dive Computer
- QUICK USE GUIDE
- MAIN Menu
- SELECT FROM FOUR DIVE SCREEN OPTIONS — Light, Classic, Full, Graphical
- CHECK YOUR BATTERY
- PAIRING YOUR TRANSMITTER
- HOW TO POSITION AND USE THE DIGITAL HEART RATE MONITOR
- References
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
SCUBAPRO G2 Wrist Dive Computer
QUICK USE GUIDE
BUTTONS
Press
The act of pressing and releasing one of the buttons.
Press-and-Hold
The act of pressing and holding one of the buttons
for 1 second before release.
|
TURN ON: Press-and-hold the right button.
GO BACK: Press-and-hold the right button.
RETURN HOME: Press-and-hold right & left buttons simultaneously.
---|---
| Button functions at the SURFACE in SCUBA and GAUGE modes
LEFT BUTTON
(Menu)
| MIDDLE BUTTON
(Log)
| RIGHT BUTTON
(Light/Dim)
Press| Main menu| Logbook| Backlight
Press-and-Hold| Oxygen setting| Gas summary table| Compass
| Button functions while DIVING in SCUBA mode
LEFT BUTTON
(Book)
| MIDDLE BUTTON
(More)
| RIGHT BUTTON
(Light/Dim)
Press| Bookmark + stopwatch reset| Alternate window in sequence| Backlight
Press-and-Hold
|
Start manual gas switch
| Alternate display in sequence; Compartment saturation; Dive profile/pictures|
Compass
| Button functions while DIVING in COMPASS mode
LEFT BUTTON| MIDDLE BUTTON
(Set)
| RIGHT BUTTON
(Exit)
Press| Set bookmark and reset stopwatch| Set bearing|
Press-and-Hold| | Erase set bearing| Exit compass mode
MAIN Menu
Navigate through the Main Menu with the three easy-push buttons
LEFT BUTTON
(Scroll Down)
| MIDDLE BUTTON
(Scroll Up)
| RIGHT BUTTON
(Enter Your Selection)
SELECT FROM FOUR DIVE SCREEN OPTIONS — Light, Classic, Full, Graphical
(Go to Personalization > Screen configuration) You can also rotate the screen to have the buttons positioned at the bottom of the screen.
LIGHT SCREENS IN FOUR DIFFERENT COLOR OPTIONS
CHECK YOUR BATTERY
- Your G2 is powered by a rechargeable Li-Ion battery.
- Always check the battery capacity before each dive.
- If the battery warning appears, charge the battery.
WARNING!
Once your G2’s battery reaches the end of its lifetime, it can only be
replaced by an authorized SCUBAPRO service center. Do not open your G2 or try
to replace the battery yourself!
Opening the G2’s housing or the metal cap on the side of the G2 will VOID
YOUR WARRANTY.
Changing the battery must be done with particular care in order to prevent
water from seeping in. The G2’s warranty does not cover damages due to the
improper placement of the battery, or the incorrect closing of the battery
cap.
PAIRING YOUR TRANSMITTER
METHOD 1 AUTOMATIC
- Mount the 1st stage with the transmitter attached on a full tank.
- Turn on your G2, make sure it is displaying the time-and-date screen, then place it near the transmitter (as shown on the right) and open the tank valve.
METHOD 2 MANUAL
- Mount the 1st stage with the transmitter attached on a full tank.
- Turn on your G2.
- From the time-and-date screen press the left button to enter the Main Menu.
- Scroll to Other Settings.
- Press the right button to enter.
- From Other Settings menu scroll down to Gas Integration.
- Press the right button to enter.
- From Gas Integration menu scroll to Pairing.
- Press the right button to enter.
- Open the tank valve, and you are ready to pair.
- Using either method, once pressurized the transmitter will send a pairing sequence to your G2.
- When it receives this information, the display will show a list of tank designations.
- Scroll to Tank T1. (Tank T1 is always the main tank you start your dive with.)
- Press the right button to save your selection.
- Your G2 will confirm the pairing with the message “PAIRING TO T1 SUCCESSFUL”.
- At that point the tank pressure will appear on your G2’s display, and you’re ready.
HOW TO POSITION AND USE THE DIGITAL HEART RATE MONITOR
- Position your Digital Heart Rate Monitor as shown on the right.
- Adjust the soft strap so that it is comfortable to wear but snug enough so that it stays in place.
- he Digital Heart Rate Monitor must be worn directly against the skin.
- oisten the electrode areas if your skin is dry or when diving in a drysuit.
The maximum operating depth for the Digital Heart Rate Monitor is 393ft/120
m.
TO ACTIVATE THE
HEART RATE FUNCTION ON YOUR G2
- From the time-and-date screen press MENU to enter Main Menu
- Scroll to Personalization & press ENTER.
- Scroll to Workload & press ENTER.
- Select Heart Rate & press right button to save.
- Advance to Max HR – set value & press right button to save.
- Advance to Base HR– set value & press right button to save.
- Advance to Use skin temp. – set to ON & press right button to save.
- eart Rate & Skin Temperature functions are now activated.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>