SCUBAPRO GALILEO HUD Hands-Free Computer User Guide

SCUBAPRO GALILEO HUD Hands-Free Computer

Waypoints are a great tool to help with surface navigation to the dive site. You can add up to 32 waypoints into your Galileo HUD Hands-Free Computer. This is a quick how-to guide to adding waypoints into your computer.

HOW TO ADD A NEW WAYPOINT

1. Connect the HUD to your PC/Mac via Disk Mode
   

2. Open the “waypoints.gpx” file using a text editor software like Microsoft Notepad

3. Delete the whole file content inside the “waypoints.gpx” file.

4. Copy and paste the below text code into the “waypoints.gpx” file.
   <?xml version=”1.0”?>

   Sample waypoint

5. Locate the latitude and longitude coordinates of your desired location on a map.
   

6. Enter your latitude coordinate into the code. It should replace “42.993283” after “<wpt lat=

7. Enter your longitude coordinate into the code. It should replace “6.273917” after “lon=”.\

8. Enter the name of your waypoint. (maximum of 8 characters)
   It should replace “Sample waypoint” in the code. Example: Let’s say you want to save your favorite Lake Zurich, Switzerland waypoint into your Galileo HUD Hands-Free Computer. The coordinates for the location are 47.222728, 8.752629.
   Your waypoint text code should read:
   <?xml version=”1.0″?>

   zurisee

9. Save the .gpx file without renaming it.

10. The new waypoint will now be visible in the navigation menu under the Compass entries.
    

HOW TO ADD MULTIPLE WAYPOINTS

1. For adding multiple waypoints insert the below code in the blank line before the code .

   Sample waypoint

2. The content of your .gpx file with your multiple waypoints should look like the below example:
   waypoints.gpx – Editor
   Date Edit Format View 7.
   <?xml version=”1.0″?>
   <gpx version=”1.1 “>

   Sample waypoint1 Sample waypoint2 Sample waypoint3

3. Remember to replace the latitude and longitude coordinates and the name each time.

4. Save the .gpx file without renaming it.
   Note: If your coordinates are expressed in Degrees, Minutes, Seconds (DMS) format, they will need to be converted to latitude and longitude values in Decimal Degrees (DD) format before adding them as your waypoints. Different tools for GPS coordinates conversion can be found online, such as under https://www.gps-coordinates.net/gps-coordinates-converter

References

• scubapro.com
• GPS coordinate converter

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>