NObreath N101242 FeNO Monitor User Guide
- June 3, 2024
- NObreath
Table of Contents
Quick Start Guide
Taking a Breath Test
-
Press and hold the on/off button once to switch the monitor on and wait up to 60 seconds for the rnonitor to stabilise.
-
Attach a new mouthpiece to the unit and select either the adult or child breath test.
NOTE: TO cancel the breath test, press the icon. -
As prompted onscreen by nhale until prompted to exhale. Do not inhale through the mouthpiece.
-
When exhale icons appear, , keep the monitor upright and blow gently into the mouthpiece. Make sure you are not covering the vent holes.
NOTE: The exhalation time is approximately 12 seconds for an adult an d 10 for a child. -
The onscreen flow meter will guide you on the exhalation rate: continue blowing until the green tick√ appears onscreen to signify a successful test.
NOTE: If you blow outside of the exhalation guidelines, the test will beep, before signifying a fail, and a red cross**X**will appear. Touch to retry the test or Into view the result. -
Following the tick, a result will appear on the screen, in PP,
-
You may save this result by pressing . Alternatively, you can return to the home screen by pressing
-
If you choose to save your results you will be shown a list of patient profiles. Select a previously set profile to add your result to, or select an empty profile to set a new one. Set the profile by typing in a name or reference, and press .
-
Remove and dispose of the mouthpiece in accordance with local waste and disposal guidance.
-
If no further tests are required, press and hold the on/ off button once to turn the NObrecrth° off and store on NObrecitheDock to charge unit.
NOTE: A PIN is required to save the reading to a patient profile, the default pin is 0000. It is highly recommended that you change the PIN to a 4 digit number that you will remember. If you have not entered your PIN in the last 30 minutes, you will be asked to enter it before you can access the patient profiles. If your PIN is entered incorrectly, you will be notified and the screen will refresh for you to re-enter your PIN. If you have forgotten your PIN, please contact Bedfont® or your local distributor to reset it.
coVita – USA Representative for Sales,
Service & Support 212 Cottage Grove Ave Suite C Santa Barbara, CA 93101
Tel: 800.707.5751
Fax: 800.721.2377
Email: service@covita.net
Website: www.covita.net
Bedfont® Scientific Ltd Station Road, Harrietsham, Maidstone, Kent, ME17 1JA,
England
Tel: +44 (0)1622 851122,
Fax: +44 (0)1622 854860
Email: ask@bedfont.com,
Web: www.bedfont.com
© Bedfont® Scientific Limited 2021
Issue 6 – May 2021, Part No: LAB760 Bedfont® Scientific Limited reserve the
right to change or update this literature without prior notice.
Registered in: England and Wales. Registered No: 1289798
Bedfont® GmbH IMitterbachweg 18, 5081, Anif, Austria
Tel: +43 662 635050
Fax: +43 662 635050-50
Email: bedfont-gmbh@bedfont.com
References
- Bedfont Scientific Ltd - Supplying breath and gas analysis equipment.
- Leaders in breath analysis since 1976 - coVita