kogan ET150 Series ELSTDUSBWWA Standing Desk with USB Port User Guide

kogan ET150 Series ELSTDUSBWWA Standing Desk with USB Port User Guide

SAFETY & WARNINGS

Ensure to read all instructions and warnings in this user guide prior to assembly and first use. Retain this user guide for future reference.

• This desk can be used by children aged 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning the use of the desk in a safe way and understand the hazards involved.
• Do not allow children to play with the desk as this may lead to potential injuries.
• The power used by this desk is AC 220-240V at a frequency of 50-60Hz. Ensure the power socket used supports this.
• The maximum load capacity of this desk is 50kg.
• The operating environment of this desk is 0-40°C.
• Before using, double-check the desk has been assembled correctly.
• Throw the plastic packaging away after assembling as the plastic bags used may lead to a choking hazard for children.
• Be aware and remove any potential hazards around the area when the desk will be used.
• Do not allow water or any other liquid into the internal parts of the desk.
• The electric box contains electronic components, metals, plastics, and wires. If disposing of, do not throw the electric box into the general rubbish. Follow the local regulation when disposing of electricals.
• There may be slight noises that emit from the braking system when using the desk. This is normal and should not raise any concern.
• Ensure the power cord is turned off and unplugged before cleaning.
• Do not use corrosive or abrasive materials when cleaning the desk.
• Cleaning and user maintenance shall not be made by children without supervision.
• If the power cord is damaged, stop use immediately and contact help.Kogan.com for assistance.
• Keep the original box in the case for future transportation.

COMPONENTS LIST

WARNING: The drawings below are for guidance only and they may differ slightly from the product and fittings received.

Hardware

OVERVIEW

ASSEMBLY

Step 1: Fold the hanging storage box (4) a, shown below .

Step2: Turn the tabletop (1) upside down and place it on top of a cloth or mat so it does not directly touch and scratch the floor. Using the Philips screwdriver (7C), install the hanging storage box (4) and hooks (5) onto the tabletop (1) using ST4.2 screws (A). Using the Philips screwdriver (7C), install the control box (7A) with 19mm ST4.2 screws (7B)

Step 3: Insert the hexagonal head of the lifting columns (2) along the wiring trough on the tabletop (1). Slightly rotating it, clamp the lifting columns onto the screws on the supporting beam of the tabletop (1).
Using the Allen key (E), secure each lifting column with two 12mm M6 screws (C).

Note: Rotating the lifting columns will ensure both columns are level and stable when the desk is used.

Step 4: Using the Allen key (E), secure the feet (3) to the lifting columns (2) with four 30mm M6 screws (D) each.

Step 5: Connect the cable connected to the motor and one end of the switch cord (9) into the M1 and DC ports of the control box (7) respectively. Connect the other end of the switch cord (9) into one end of the adapter (8).

Tear off the adhesive on the cable tie (B) and fix it onto the bottom of the tabletop (1). Cables can be threaded through, providing a neat method for cable management.

Connect the other end of the adapter (8) with one end of the power cord (6). Plug the other end of the power cord into a power socket.

Place the overhanging parts of cables (6, 8, 9) into the hanging storage box (4).

Note:
Do not turn the power on if the cables are not connected.

OPERATION

With the power cord plugged in, switch on the power at the socket.

Control box

Protection

• This desk is fitted with systems to prevent damage if it is overheated.
• This desk a has current limiting in place if the desk is in danger of being short-circuited or if a device is plugged in that causes an overcurrent. This ensures the desk operates within its normal supported current range.

Quick charge
This desk supports quick charging for many smartphones and devices.

Notes:

• When the desk’s height is being adjusted, any connected device will temporarily stop charging. It will resume charging once the desk is static.
• If both the USB and USB-C ports are used simultaneously, the output voltage will cap at 5V with a maximum of 22.5W.

Saving the height
The height of the desk can be saved using the four height save buttons to allow for easy height readjustment.

• To save a height, press and hold height save button 1 ( I) for three seconds. The display will then show S -1 indicating the current height of the desk has been saved successfully.
• Height save buttons 2 ( ~ ), 3 (3), and 4 (4) all have the same function and operate identically. Once saved, the display will show’ 5-2 ‘, ‘5-3’ or ‘S -l/’ respectively. This allows for up to 4 height profiles to be saved onto the desk.
• To activate a saved height, press the corresponding height save button and the desk will automatically adjust to the saved height.

Anti-collision
This desk features anti-collision which prevents the desk from damaging nearby objects. If the desk makes contact with an object when adjusting, the desk will automatically rebound to prevent damage.

The sensitivity of the anti-collision function can be adjusted to four levels. These levels will be reflected on the LED display:

Display shows
R-0
R-1
R-2
R-3

Description
The anti-collision function is turned off.
Low sensitivity
Medium sensitivity
High sensitivity

The desk will come default with high sensitivity. To adjust the sensitivity, simultaneously press and hold the up (▲) and down (▼) buttons for 5 seconds.

Reset
Resetting the desk will remove all saved heights and anti-collision settings. To reset the desk:

1.  Press and hold the height save 3 (3) and 4 (4) buttons for at least 3 seconds. The display will then show ‘RS1’.
2.  Press and hold the down button (▼) until the desk reaches its lowest position and rebounds.
3. Release the down button (▼) and the desk will be reset.

CLEANING & CARE

Ensure the desk is turned off and the power cord is unplugged before cleaning.
Using a cloth dampened with water, wipe off the dust on the surface of the desk.

Notes:

• Do not allow water to drop into the electrical parts of the desk.
• Do not use corrosive or abrasive materials when cleaning the desk.

SPECIFICATIONS

Lifting mechanism stages – 2
Maximum load capacity – 50kg
Maximum load capacity of one hook – 4.5kg
Adjustable height range – 730-1210mm
Maximum adjustment speed  – 25mm per second
Supported outputs (USB-C port)  – 5V-3A, 9V-3A, 12V-3A, 15V-3A, 20V-2.25A
Maximum: 45W
Supported outputs (USB port) – 5V- 2A, 9V- 2A, 12V- 1.5A, 15V- 1.8A,20V-0.9A
Maximum: 27W

TROUBLESHOOTING

Disposal
This marking indicates that this appliance should not be disposed with other household wastes. To prevent possible harm to the environment or human health from uncontrolled waste disposal, recycle it responsibly to promote the sustainable reuse of material resources.

Need more information?
We hope that this user guide has given you
the assistance needed for a simple set-up.
For the most up-to-date guide for your product,
as well as any additional assistance you may require,
head online to help.kogan.com

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>