SEALEY AP1248SS.V2 Stainless Steel Workbench Instruction Manual

SEALEY AP1248SS.V2 Stainless Steel Workbench

SAFETY

• WARNING: Ensure Health & Safety, local authority, and general workshop practice regulations are adhered to when using this bench.
  • Locate bench in a suitable working area.
  • Keep the work area clean, uncluttered and ensure there is adequate lighting.
• WARNING: Use bench on level and solid ground, preferably concrete. Avoid tarmacadam since the bench may sink into the surface.
  • Keep the bench clean and tidy in accordance with good workshop practice.
  • Keep children and un authorised persons away from the working area.
• DO NOT use the bench for any purpose other than that for which it is designed.
• DO NOT exceed maximum capacity of work bench.
• DO NOT undertake work on the bench without the work piece being adequately secured. Use clamps or a vice (not included) to secure the workpiece. Available from your Sealey stockist.
• DO NOT use the bench out of doors.
• DO NOT get the bench wet or use in damp or wet locations or areas where there is condensation.

INTRODUCTION

Galvanized steel frame with a 430 grade stainless steel worktop. Features an adjustable bottom shelf for added storage space.
Maximum capacity of 145kg on Model No’s AP1248SS and AP1560SS, and 170kg on Model No’s AP1872SS and AP2184SS.
Adjustable feet for leveling the workbench when placed on an uneven surface. Some simple assembly required.

SPECIFICATION

CONTENTS

ASSEMBLY

1. Place the workbench top face down on the floor, use the packaging to avoid scratching, Step 1.
2. Insert legs into sockets, fasten screws, Step 2.
3. Pass the shelf over the legs and slide on for at least 230mm, so that the shelf will sit at least 150mm above the floor when completed, Step 3.
4. Tighten the screws, step 4. Turn workbench over and adjust feet to level unit.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>