VECLESUS VM1B HD Baby Car Monitor System User Manual

June 5, 2024
VECLESUS

VECLESUS VM1B HD Baby Car Monitor System

VECLESUS-VM1B-HD-Baby-Car-
Monitor-System-product

Notice
For your safety, non-professionals are not allowed to disassemble products at will, if the product is installed unsuccessfully, please consult after-sales service[service@veclesusclub.com] or send it to the local maintenance department.

  1. In the cold weather, a dark screen may appear when the product is started up. But when the product is powered on, it will heat up slowly, and the display will slowly return to normal as the temperature increases. It is possible to have a small number of “bright spots” on the LCD screen, which is acceptable in LCD technology.
  2. Do not press on the LCD monitor screen, which may cause image distortion or malfunction, the image may become blurred, and the screen may be damaged. Gently wipe the display with a soft damp cloth.

Connection Guide

VECLESUS-VM1B-HD-Baby-Car-Monitor-System-
fig-1

Testing
Before routing the video cable, please connect the monitor to the camera and connect the car charger to the power supply to check if it works.

Wire Routing
After testing, route the video cable as the picture below (The camera can be installed anywhere in the car through the telescopic clip and suction cup bracket provided )VECLESUS-VM1B-HD-Baby-Car-Monitor-System-
fig-2

Camera Installation

The camera has two types of mounting brackets to choose from, available suction cup bracket or headrest bracket installation, the specific way to install depends on your installation location.

  1. Connect the tail cable of the camera to the end of the extension cable with the word “camera”. 1080P CameraVECLESUS-VM1B-HD-Baby-Car-Monitor-System-fig-4
  2. Hold the camera with the clips of the headrest mount, pay attention to keep the camera out of the line position down to ensure that the monitor image is not upside down.
  3. Mount the bracket to the metal pole of the car seat.
  4. Alternative mounting method: You can also use the attached suction cup bracket to realize the mounting on the car glass window.VECLESUS-VM1B-HD-Baby-Car-Monitor-System-fig-7

Monitor Installation

  1. Button FunctionsVECLESUS-VM1B-HD-Baby-Car-Monitor-System-fig-8
  2. Mounting Monitor – The monitor is mounted by using the suction cup dual-use bracket, which you can mount on the dashboard or on the windshield.
    • Fit the bracket holes on the back of the monitor to the four-claw bracket and push up to lock the bracket in place.
    • Remove the protective film from the bottom of the suction cup adhesive bracket and install it to the location you want to install
    • The monitor has two tail wires, one with the word “12-24V”, please connect this wire to the car charger charging wire. The other one is connected to the extension cable with the word “Monitor” on it.
    • Plug the car charger into the cigarette lighter of the car, start the car, and the monitor will show the image.

Package Contents

Baby Cam e ra *** 1**

|

SM(16.4 ft ) Ex t e nsi o n Vid e o Cabl **e* 1**

---|---

4 . 3″ B a b y Car Monitor * 1

|

*User Manual 1**

Technical Specification

NOTE: The product’s camera and monitor are not waterproof, please do not expose them to rain.

Monitor:

Screen Size|

4.3″

| Power

Consumption

|

<2W

---|---|---|---
Power Supply| DC12V-24V| Aspect Ratio| 16:9
Operating

T emperatu r e

| -4 1′ -1ss 1′

R H 95% MA X

|

Resolution

|

800’RGB’480

Storage Temperature|

-221′-1751′

RH 95% MAX

|

Signal System

|

Automatically

Video Input| Mini 4-Pin| Brightness| 2SOcd/ n/

Camera

Sensor CMOS Water-proof No n -waterproof
Po we r Supply DC12V-24V Night Vision YES
Operating T e mperatur e -4 1′ -1ss ‘F

RH9S% MAX

|

Resolution

|

1080P

Storage T emperat ur e| -221′ -1761′

RH95% MA X

|

TV System

| PAL(  I

NTSC( v)

Video Out

| Mini 4-Pin|

Effective Pixel

| 2 Million P i x els

S/N Ratio

|

48dB

|

Vertical Sync Fr e

|

60Hz

Trouble Shooting

Probl ems

|

Solutions

---|---

Grainy image

|

Check the voltage – The working voltage should be cont oiled between 12-24V, please check whether the voltage is too high or too low.

Black Screen

| 1. Check the monitor connector – if it is defective

2. Check the 4-pin cable is secured to the video cable, and ensure the video and power cables are connected well.

3. Check the camera – Connect well with the extension cable

4. Contact the support team: service@veclesusclub.com

Warranty
This product is covered by a 365-day warranty, during the warranty period, if the product was used under normal conditions, you will be entitled to the repair of the product and replacement of parts free of charge arising from defects in the materials and workmanship. Veclesus reserves the right to amend the warranty content without prior notice.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals