HFCL HSP-IO-4GE2S Series 4 Port L2 Managed Switch User Guide
- August 4, 2024
- HFCL
Table of Contents
HFCL HSP-IO-4GE2S Series 4 Port L2 Managed Switch
Product Specifications
- Capacity:
- Switching: 12 Gbps Forwarding: 8.93 mpps
- Switching: 16 Gbps (CPD variant) Forwarding: 11.9 mpps (CPD variant)
- Port Configuration:
- 4×10/100/1000 Base-T Gigabit Access Ports with PoE+ and Non-PoE variant
- 2x1G SFP Gigabit Uplink Ports
- 2x1G RJ45 ports only in CPD model
- Smart PoE
- L2 features Security:
- Storm Control
- Support 4094 VLAN IDs, 16K MAC Table
- L2, L3, L4 ACLs, 802.1X Authentication (RADIUS, TACACAS+)
- Broadcast, Multicast and Unknown Unicast Management
- Temperature: Operating: 0 to 55°C
- Power Input: 100V to 240V for AC and -36V to 57V for DC
Quick Start Guide
4 Port L2 Managed Switch
Applicable on:
HSP-IO-4GE2S-C2U
IO 4-Port non-PoE L2 Managed Switch with 2x1G SFP
Uplink ports and Universal Power supply
HSP-IO-4GE2S-C2A
IO 4-Port Non-PoE L2 Managed Switch with 2x1G SFP
Uplinks and Single AC Power Supply
HSP-IO-4GE2S-CPD
IO 4-Port PoE+ L2 Managed Switch with 2×1 SFP and 2x1G RJ45 Uplink ports and
Dual DC Power supplies
Introduction
Thank you for choosing the 4-port L2 commercial Switch from HFCL Switching Platform (HSP). PoE variants suitable in an enterprise/telco/campus environment to connect end PoE clients like Wi-Fi AP, CCTV, P2P, P2MP, IoT etc. Non-PoE variants suitable to connect Small Cells / BTS, P2P/P2MP etc. in a telco environment and desktops/servers, IP-phone etc. in an enterprise/ campus environment.
Packaging Content
- 4 Port Switch Qty: 1 number
- Mounting clamps with screws
- DC Connector: 1 number (For DC variants)
- Standard power cable 1.5m (for AC variants)
Bracket Assembly
Assembly of brackets for Rack mounting described in below diagram for 4 Port L2 commercial Switch Model for 4 Port L2 commercial Switch Model
Step 1: Secure the brackets to the device using the supplied screws from the Mounting Accessory.- Step 2: Install the device in the rack using four rack-mounting screws. Ensure that the lower rack-mounting screws are secured first to prevent the brackets from bending due to the Switch’s weight.
- Step 3: If installing multiple Switches, mount them in the rack, one below the other, in any order, maintaining required space for cabling.
- Step 4: Securely connect to power source and turn on to configure and operate.
Product specification
Port L2 Managed Switch Specifications
Capacity| Switching: 12 Gbps
Forwarding: 8.93 mpps
Switching: 16 Gbps (CPD variant)
Forwarding: 11.9 mpps (CPD variant)
---|---
Port Configuration| 4×10/100/1000 Base-T Gigabit Access Ports with PoE+ and
Non- PoE variant
Uplink Ports| 2x1G SFP Gigabit Uplink Ports 2x1G RJ45 ports only in CPD model
PoE Feature| Smart PoE
L2 features| Support 4094 VLAN IDs, 16K MAC Table
Security| L2, L3, L4 ACLs, 802.1X Authentication (RADIUS, TACACAS+)
Storm Control| Broadcast, Multicast and Unknown Unicast
Management| CLI, Telnet, SSHv2, SNMP v1/v2/v3 and ZTP
Temperature| Operating: 0 to 55 degree C
Power Input| 100V to 240V for AC and -36V to 57V for DC
Login access
The console access to the Switch can be obtained via the console port using RJ45 to DB9 serial port adapter. An administrator can access the device using command line interface (CLI) with the following console port setting as part of factory default configuration.
Port LED status
| LED Label | LED Colour | Indication | Status |
|---|---|---|---|
| ACT | Green/Yellow | Yellow blinking | Non PoE with activity |
| Green blinking | PoE On with Activity | ||
| Solid Green | PoE On with no activity | ||
| OFF | Non PoE with no activity |
LINK
| Green/Yellow| Solid Green| Link Up at 1000Mbps speed
Solid Yellow| Link Up at 100Mbps speed
OFF| No Link
System LED status
| LED Label | LED Colour | Indication | Status |
|---|---|---|---|
| SM | Blue | OFF | System is powered OFF |
| Blinking | Power up sequence in process | ||
| Solid ON | System is booted and operational |
ALM
| Red| OFF| No alarms reported
Blinking| Alarm reported
Solid ON| Critical alarm reported
Safety Precautions
Observe the following safety precautions to avoid damage to the Access Point:
- Do not power the device during installation.
- Keep away from high voltage cables.
- Do not power off the unit in the middle of an upgrade process.
- Do not open the enclosure.
Part No : QSG-04-0003 Revision: A
Contact Us
Email: iosupport@hfcl.com
Websites: hfcl.com | io.hfcl.com
Address: 8, Commercial Complex, Masjid Moth, Greater Kailash-II, New
Delhi- 110048
HFCL Limited All Rights Reserved. HFCL and io by HFCL are trademarks or registered trademarks of HFCL Ltd. Specifications are subject to change without notice.
References
- HFCL | Leading Digital Network Solutions | Manufacturers of Optical Fiber Cables
- IO by HFCL: Transforming Telecom and Technology Solutions
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>