VECLESUS EV-4320HDS VM1 1080P Wired Car Backup Camera Kit User Manual

User Manual VECLESUS VM1 HD
Car Rear View Camera System

Safety Information

For your safety, non-professionals are not allowed to disassemble products at will, if product failure, please consult after-sales service [service@veclesusclub.com] or send it to the local maintenance department.

1. In the cold weather, a dark screen may appear when the product is started up. But when the product is powered on, it will heat up slowly, and the display will slowly return to normal as the temperature increases. It is possible to have a small number of “bright spots” on the LCD screen, which is acceptable in LCD technology.
2. Do not press on the LCD monitor screen, which may cause image distortion or malfunction, the image may become blurred, and the screen may be damaged. Gently wipe the display with a soft damp cloth

Connection Diagram

Testing

Before routing the video cable, please connect the monitor and put the car gear to reversing and check if it works.

Wire Routing

After testing, route the video cable as the picture below (two ways of routing are available)

Camera Installation

1. First we need to mount the camera to the car license plate. Proceed as follows
   (A) Loose the original screws on the number plate with wrench
   (B) Thread camera cable through the space for the number plate light If your car doesn’t feature thislight, or a hole to thread this cable through, a discreet 7mm hole needs to be drilled to allow this cable into the rear part of the car trunk
   (C) Once the cable is secure inside the car, Then tighten the screws to put the camera on the license plate, and put the license plate back tothe vehicle, If necessary, use cross screwdriver to loosen the screw beside the camera head, till up or down the vertical angel of the lens, which may improve the view of the camera lens.

2. Find out the wire hole reserved for the reversing camera above the license plate, then put the camera wire through this hole. For vehicles withou the wire hole reserved, you may need to drill a hole of about 7 mm to lay out the camera’s wire.

3. Next, connect the tail wire of the camera to the extension cord, and then follow the wiring diagram to connect the other end of the extension cord to the monitor. At this time, the camera and the monitor have been successfully connected.

4. Power Connection: The system is powered by the car charger, so it only needs to connect the car charger to the tail wire of the monitor, and then the car charger can power through the hole of the cigarettelighter to make the system work normally.

5. About the parking guideline. Only when the green reverse trigger line of the camera s connected to the reverse light can the parking guideline function be activated . Of course, you can ignore this green wire if you want the system to continue working while the car is started.

Monitor Installation

1.  Button Functions
2. Mounting monitora) There are two ways to install the monitor, mount it on windshield or dashboard, simply remove the cover over the adhesive pad and apply to the desired flat surface, then press the suker switcher to fix the monitor.
   b) If applying tothe windshield, ensure the monitor does not obstruct your driving view.
   c) Connect the monitor wire to the camera video cable.

Package Contents

Technical Specification

Monitor :

Screen Size| 4.3″ IPS Screen| Power
Consumption| <2W
---|---|---|---
Power Supply| DC 12-24V| Aspect Ratio| 16:9 Widescreen
Operating Temperature| -4°P-158°F RH95% MAX| Storage Temperature| -22°P-176°F RH95% MAX
Video Input| Mini 4-Pin| Brightness| 500cd/m2

Backup Camera:

Trouble Shooting

2. Checkif the car charger is in full
contact with the cigarette lighter hole 3. Checkif the monitor is damaged.
Black Screen| 1. Check the monitor connector- if it is defective.
2.Check the 4 pin cable is secured to the video cable, ensure the video and power cables are connected well
3. Whether the power button in the middle of the monitor has been turned on and presents blue light
4. Contact support team: service@veclesusclub.com

Warranty

This product is covered by a 365-day warranty, during the warranty period, if the product was used under normal conditions, you will be entitled to the repair of the product and replacement of parts free of charge arising from defects in the materials and workmanship.
Veclesus reserves the right to amend the warranty content without prior notice.

www.veclesusclub.com
www.veclesus.net
Email: service@veclesusclub.com 
Installation support via
service@veclesusclub.com 
scan the QR code below:
http://qr61.cn/oq1pwL/qjCIdTh

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>