VECLESUS EV-430CHDS 1080P Wired Car Backup Camera Kit User Manual
- June 15, 2024
- VECLESUS
Table of Contents
VECLESUS EV-430CHDS 1080P Wired Car Backup Camera Kit
Specifications
- Product Name: [Product Name]
- Model Number : [Model Number]
- Screen Type: LCD
- Screen Size: [Screen Size]
- Resolution: [Resolution]
-
Cold Weather Startup
In cold weather conditions, the product may initially display a dark screen when powered on. This is normal and occurs due to tholos temperature affecting the display. As the product heats up, the display will gradually return to normal as the temperature increases. -
Bright Spots on LCD Screens
It is possible to observe a small number of bright spots on the LCD screen. Please note that this is considered acceptable in LCD technology and does not indicate a defect or malfunction.
Safety Information
- For your safety, non-professionals are not allowed to disassemble products at will, if product failure, please consult after-sales service [service@veclesusclub.com] or send it to the local maintenance department.
- In the cold weather, a dark screen may appear when the product is started up. But when the product is powered on, it will heat up slowly, and the display will slowly return to normal as the temperature increases. It is possible to have a small number of “bright spots” on the LCD screen, which is acceptable in LCD technology
- Do not press on the LCD monitor screen, which may cause image distortion or malfunction, the image may become blurred, and the screen may be damaged. Gently wipe the display with a soft damp clothe.
Connection Diagram
Testing
- Before routing the video cable, please connect the monitor and put the car gear to reversing and check if it works.
Wire Routing
- After testing, route the video cable as the picture below (two ways of routing are available).
Camera Installation
-
First we need to mount the camera to the car license plate.
Proceed as follows- (A) Loose the original screws on the number plate with wrench.
- (B) Thread camera cable through the space for the number plate light. If your car doesn’t feature this I ight, or a hole to thread this cable th rough, a discreet 7mm hole needs to be d rilled to al low this cable into the rear part of the car trunk.
- (C) Once the cable is secure inside the car, Then tighten the screws to put the camera on the license plate, and put the license plate back to the vehicle. If necessary, use cross screwdriver to loosen the screw beside the camera head, till up or down the vertical angel of the lens, which may improve the view of the camera lens.
-
Find out the wire hole reserved for the reversing camera above the license plate, then put the camera wire through this hole. For vehicles without the wire hole reserved, you may need to drill a hole of about 7mm to lay out the camera’s wire.
-
Next, connect the tail wire of the camera to the extension cord, and then follow the wiring diagram to connect the other end of the extension cord to the monitor. At this time, the camera and the monitor have been successfully connected.
-
Power Connection: The system is powered by the car charger, so it only needs to connect the car charger to the tail wire of the monitor, and then the car charger can power through the hole of the cigarette lighter to make the system work normally.
-
About the parking guideline. Only when the green reverse trigger line of the camera is connected to the reverse light can the parking guideline function be activated . Of course, you can ignore this green wire if you want the system to continue working while the car is started.
Mirror Installation
- Button Functions
- Mode switch
- Menu key
- Power key
- Decrease
- Increase
- Red LED light
Mounting Mirror Monitor
- The back cover of the mirror monitor is designed with a spring clip, which can be directly attached to the original rear view mirror on the car.
Package Contents
Technical Specification
| Screen Size | 4.3″ | Power Consumption | <2W |
|---|---|---|---|
| Power Supply | DC 12-24V | Aspect Ratio | 16:9 Widescreen |
| Operating Temperature | -4°F~1ss°F RH95% MAX | Storage Temperature | -22° F~176°F |
RH95% MAX
Video Input| Mini 4-Pin| Brightness| 250cd/ m 2
Backup camera
| Sensor | CMOS | Water-proof | IP68 |
|---|---|---|---|
| Power Supply | DC 1 2-24V | Night Vision | YES |
| Operating Temperature | -4°F~1ss°F RH95% MAX | Resolution | 1080P |
| Storage Temperature | -22° F~176° F RH95% MAX | TV System | PAL( ) NTSC( v) |
| Video Out | 4 Pin adapter | Effective Pixel | 1920*1080 |
| S/N Ratio | >48dB | Vertical Sync Fre | 60Hz |
Trouble Shooting
| Problems | Solutions |
|---|---|
| Grainy image |
- Check if the connector of the wire is poor contact.
- Check if the car charger is in ful I contact with the cigarette lighter hole.
- Check if the monitor is damaged.
Black
Screen
|
- Check the monitor connector- if it is defective.
- Check the 4 pin cable is secured to the video cable, ensure the video and power cables are connected well.
- Whether the power button in the middle of the monitor has been turned on and presents blue light.
- Contact support team: service@veclesusciub.com
Warranty
This product is covered by a 365-day warranty, during the warranty period, if the product was used under normal conditions, you will be entitled to the repair of the product and replacement of parts free of charge arising from defects in the materials and workmanship. Veclesus reserves the right to amend the warranty content without prior notice.
-
Email : service@veclesusclub.com
-
Installation support vi a: service@veclesusclub.com or
scan the QR code below
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>