VECLESUS VT1B Baby Car Monitor System User Manual

June 5, 2024
VECLESUS

VECLESUS VT1B Baby Car Monitor System

VECLESUS-VT1B-Baby-Car-Monitor-System

Notice

For your safety, non-professionals are not allowed to disassemble products at will, if product is installed unsuccessfully, please consult after-sales service[service@veclesusclub.com] or send it to the local maintenance department.

  1. In the cold weather, a dark screen may appear when the product is started up. But when the product is powered on, it will heat up slowly, and the display will slowly return to normal as the temperature increases.It is possible to have a small number of “bright spots” on the LCD screen, which is acceptable in LCD technology.
  2. Do not press on the LCD monitor screen, which may cause image distortion or malfunction, the image may become blurred, and the screen may be damaged. Gently wipe the display with a soft damp cloth.

Connection Guide

VECLESUS-VT1B-Baby-Car-Monitor-
System-1

Testing

Before routing the video cable, please connect the monitor to the camera and connect the car charger to the power supply to check if it works.

Wire Routing

After testing, route the video cable as the picture below (The camera can be installed anywhere in the car through the telescopic clip and suction cup bracket provided )VECLESUS-VT1B-Baby-Car-Monitor-
System-2

Camera Installation

  1. The camera has two types of mounting brackets to choose from, available suction cup bracket or headrest bracket installation, the specific way to install depends on your installation location.
  2. Connect the tail cable of the camera to the end of the extension cable with the word “camera”.
  3. Hold the camera with the clips of the headrest mount, pay attention to keep the camera out of the line position down to ensure that the monitor image is not upside down.
  4. Mount the bracket to the metal pole of the car seat.
  5. Alternative mounting method: You can also use the attached suction cup bracket to realize the mounting on the car glass window.

Monitor Installation

Button Functions

  1. Mode Switch
  2. Menu Key
  3. Power key
  4. Decrease
  5. Increase
  6. Red LED light

Mounting Monitor – The back cover of the mirror monitor is designed with a spring clip, which can be directly attached to the original rear view mirror on the car.

Mode Selection

You can turn ON/OFF the monitor screen when you start the car and short pressing the” <l, ” power button, this product has a memory function. If you turn off the monitor, the next time you start the car, the monitor will also be OFF, the opposite is also the same.

Package Contents

Baby Camera • 1

|

SM(16.4ft) Extension Video Cable• 1

---|---

4.3 ” Baby Car Monitor • 1

|

User Manu al• 1

Technical Specification

NOTE: The product’s camera and monitor are not waterproof, please do not expose them to rain.

Monitor:

Screen Size|

4.3″

| Power Consumption| < 2W
---|---|---|---
Power Supply| DC12V-24V| Aspect Ratio| 16:9
Operating

Temperature

| -41’~1ss 1′ RH95% MAX|

Resolution

|

800RGB480

Storage Temperature| -221′ ~1761′ RH95% MAX|

Signal System

|

Automatica l ly

Video Input| Mini 4-Pin| Brightness|

250cd/m’

Camera:

Sensor CMOS Water- proof Non waterproof
Power Supply DC12V-24V Night Vision YES
Operating Temperature -4 1′ ~1ss 1′ RH95% MAX

Resolution

|

1080P

Storage

Temperature

| -221′ ~1761′ RH95% MAX|

TV System

|

PAL(  )

NTSC(v)

Video Out| Mini 4 Pin| Effective Pixel| 2 Mill i on Pixels

5/N Ratio

|

48dB

|

Vertical Sync Fre

|

60Hz

Trouble Shooting

Problems

|

Solutions

---|---

Grainy image

|

Check the voltage – The working voltage should be controlled between 12-24V, please check whether the voltage is too high or too low.

Black Screen

| 1. Check the monitor connector – if it is defective

2. Check the 4 pin cable is secured to the video cable, ensure the video and power cables are connected well.

3. Check the camera – Connect well with the extension cable

4. Contact support team: service@veclesusclub.com

Warranty

This product is covered by a 365-day warranty, during the warranty period, if the product was used under normal conditions, you will be entitled to the repair of the product and replacement of parts free of charge arising from defects in the materials and workmanship. Veclesus reserves the right to amend the warranty content without prior notice.

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

Related Manuals