Holoscope D42 3D Fan Display User Manual
- September 27, 2024
- Holoscope
Table of Contents
D42 3D Fan Display
“`html
Product Specifications
Product Model| Brightness| Number of Lamp Beads (pieces)| Display Diameter
(CM)| Resolution| Input Voltage (V)| Rated Power (W)| Angle Brightness
Control| Splicing| Features| Package Size (MM)
---|---|---|---|---|---|---|---|---|---|---
PD42-P65| Highlight| 768| 420420| 1024640| 12V2A| 18W| Yes| Without horns|
High frame rate camera, Multi-function remote control,
Bluetooth audio| 26414358
PZ65-PD42-| Highlight| 768| 420420| 1024800| 12V2A| 20W| Yes| Multiple
screens are spliced| High frame rate camera, Multi-function remote control,
Bluetooth audio| 26414358
Installation Instructions
Installation Demonstration:
-
Insert the two blades into the host port, align the six screws
with the screw holes, and fix the indicator securely to prevent it
from falling off. -
For wall mounting, insert the screws through the wall-mounting
holes, align them with the expansion screw tube, and drive them
into the appropriate positions.
Faults and Maintenance Tips:
-
If the device cannot be turned on after plugging in, check the
power supply and observe the power indicator. -
If the screen is abnormal or not displaying correctly, check
for loose screws or foreign objects in the connectors. -
If a black circle appears on the screen, clean the lamp bead
surface with a soft dry cloth regularly. -
Avoid unauthorized disassembly or exposure to water to prevent
damage not covered by warranty.
Detailed Installation Steps:
-
Insert the fan blades into the unit in pairs (A to A, B to B)
and tighten 12 screws to secure them. -
Ensure all screws are tight to prevent the light strip from
falling off. -
Complete the installation process once all screws are securely
fastened.
Frequently Asked Questions (FAQ)
Q: Can the product be used outdoors?
A: It is recommended not to expose the product to rain or other
liquids to prevent damage.
Q: How to check if the installation is stable?
A: After installation, shake the 3D fan vigorously to ensure
there is no rocking phenomenon.
Q: What should I do if the screen displays abnormally?
A: Check for loose screws and foreign objects in the connectors
that may be affecting the display.
“`
Holoscope
User manual
- Please read this manual carefully before using the equipment *
Holoscope
Warn:
1. Do not bend or twist the power cable too much; otherwise, the power cable
may be damaged and a fire may occur
2. Do not allow the machine to come into contact with rain or other liquids
3. Do not use or store the machine in high temperature, high pressure and
strong magnetic field, dusty and humid environment
Attention:
1. Install the host securely to avoid falling, the power cable may be damaged
and a fire may occur
2. Please install the product in a place that cannot be touched by human
hands, or buy a protective cover to avoid injury
3. Stable installation: Ensure that the 3D fan will not loosen and fall off
during use. After the installation,You can shake the 3D fan vigorously to
check whether there is a rocking phenomenon
Common faults and maintenance:
1. The device cannot be turned on after being plugged in, and no screen is
displayed. Check whether the power supply is normal. After the power supply is
powered on, observe whether the power indicator is on.
2. After the device is started, the screen is abnormal or the whole light bar
is not on. Check whether the screws are not tightened and whether there are
foreign objects in the connector.
3. A black circle appears after the device has been running for a period of
time. Because there will be dust and stain on the surface of the lamp bead
when the equipment is running, clean the surface of the lamp bead with a soft
dry cloth, and usually clean the dust on the lamp board regularly to achieve
the most ideal display effect.
4. The following situations do not belong to the scope of free warranty:
unauthorized disassembly, maintenance, equipment water, oxidation and other
artificial damage
Product specifications and parameters
PD42-
P65
PZ65
PD42-
Product model Ordinary
PD45- HD
P50
P56
P62
Highlight
brightness
Number of lamp
768
768
244
244
352
576
678
722
beads (pieces)
Display diameter (CM)
420*420
420*420
450*450
487*487
560*560
615*615
650*650
650*650
Resolution
1024*640
1024*800
2000*704
20001152 20001356 20001444 20001536 2000*1536
Input voltage (V)
12V2A
12V2A
12V2A
24V2A
24V2A
24V3A
24V3A
24V3A
Rated power (W)
18W
20W
24W
48W
48w
72W
72w
72w
Angle
brightness
control
Splicing
×
×
×
×
×
×
×
without horns
Multiple
screens are
×
×
spliced
High frame rate
camera
Multi-function
remote control
Bluetooth audio
×
×
Package size (MM)
26414358 26414358 26414358 28418574 37019580 37019580 37019580 37019580
Two blade advertising machine
Installation demonstration:
1. Insert the two blades into the host port, align the six screws with the
screw holes, and fix the indicator securely. Otherwise, the indicator strip
may fall off.
2. For wall mounting, insert the screws through the wall-mounting holes,
align them with the expansion screw tube, and drive them into the appropriate
positions.
Installation instructions:
1. Insert the fan blades into the unit in pairs(A to A, B to B), then tighten
12 screws into the screw holes to secure them. Make sure they are tight or
else the light strip may fall off. Installation is complete!
2. When installing the wall mount,
just screw in the screws through the mounting block and into the right spot.
3.”Align the U-shaped hanger at the bottom of the host, then push it down and
screw the top of the U-shaped hanger on the machine hanger with a small screw
to complete installation.”
Remote control introduction
Scan and download the APP
Android
IOS
1. Search for Holoscope in the APP store for software download or contact the distributor for download. After downloading, open the app permission and use it.
Mobile APP transmits video
1.After the device is turned on, a WiFi signal will be established. Open the
WiFi screen on your phone’s Settings and search for WiFi names beginning with
3D-P, for example: 3D-PXXXXXXXX; The default password of the WiFi hotspot is
12345678
When a message is displayed indicating that the WLAN cannot be connected to the network, you must select”Stay connected”And the first time to open the APP prompt must select”Continue trying to use wireless LAN” Follow “Figure 1 (Android)” or “Figure 2 (IOS)”
Figure 1 (Android)
Figure 2 (IOS)
1 Click Transfer 2 Video 3 Select Upload video 4 Confirm content 5 Upload process 6 Upload 100%
Click”Trasfer”
Click”Video”
Select the video you want to upload
Click”OK”
Uploading
Transmission complete
The video transfer has been successful, and if you just need to replace the video or add more content, you have done so successfully without having to go through the next steps
Connect the Bluetooth speaker
1. Click on the APP to set “Bluetooth Settings “(the passwordless Bluetooth
speaker must be used, and the transmitted video must have specific sound)
Bluetooth Settings Turn on Bluetooth Wait for automatic search for Bluetooth
speaker Connected (video must have specific sound)
Click”Bluetooth”
Bluetooth On
Wait for the Bluetooth speaker
Connectedto be automatically searched
Text LOGO making
Design Select Template Save Click Transfer Select Local Select Video Transfer
Click design
Save
Back to page transfer
Select Local
Select video
Instructions for using the PC
In transmission
Download linkhttp://bg.holoscope.tech/sh/apk/app/getLastAPK/0
After the device is powered on, the WiFi signal will be established. Open the WiFi
interface of the computer and search for the name of WiFi beginning with 3D-P,
for example, 3D-PXXXXXXXX. The default password of WiFi is 12345678. Enter
password Click join Download Software Connection Connect to WIFI
Download software
Connect to WIFI
The PC transmits the video
Open software Select machine model Open
Select
machine model Click
Transfer
Select the video you want to upload
Start transmissio Wait for transmission
FCC Warnning: This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to part 15 of the FCC Rules.
These limits are designed to provide reasonable protection againstharmful
interference in a residential installation. This equipment generates, uses and
can radiateradio frequency energy and, if not installed and used in accordance
with the instructions, maycause harmful interference to radio communications.
However, there is no guarantee thatinterference will not occur in a particular
installation. If this equipment does cause harmfulinterference to radio or
television reception, which can be determined by turning the equipmentoff and
on, the user is encouraged to try to correct the interference by one or more
of thefollowing measures: · Reorient or relocate the receiving antenna. ·
Increase the separation between the equipment and receiver. · Connect the
equipment into an outlet on a circuit different from that to which the
receiver is connected. · Consult the dealer or an experienced radio/TV
technician for help.
Caution: Any changes or modifications to this device not explicitly approved
by manufacturer could void your authority to operate this equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1)This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated with
minimum distance 20cm between the radiator and your body.