ankbit RT5301 UHF Wireless Microphone System User Manual
- June 5, 2024
- ankbit
Table of Contents
Ankbit RT5301 UHF Wireless Microphone System
In the box
Product overview
Connection diagram
Control function
Transmit or
Step 1: Long press 2S to turn on/off
Step 2: The indicator light flashes blue after the receiver is turned on.
Once paled successfully, light keeps blue.
Step 3: Connect the receiver to audio input port of your speakers
Frequency display
- When the transmitor Is powered on, short press the power button 1s to mode. Use the or button to select channel.
- Once the channel is selected, long press buttons together 4s to enter searching mode, Turn the receiver on, its indicator flashes blue. When light stays blue, it means channel changed successfully.
Reset
Switch to channel select mode, then long press buttons to cither 4s to reset transmitter.
FCC
This device complies with part 15pf the FCC rules. Operation is subject fore fallowing two conditions: This device may not cause harmful interference, and (2) This device must accept any interference. Change9 or modifications not expressly approved by 1Mil Ltd. will old the users authority to operate equipment This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful Interference In a residential Installation. This equipment generates, uses and can rad late radio frequency energy and, lf not Installed and used in accordance with the instructions, may cause harmful interference to radio communications. However. there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful Interference to radio or television reception, which can be determined by turning the equipment off and on, the user ls encouraged to try to correct the interference ceby one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment to an electrical outlet on a different circuit to that which the receiver is connected.
- Consult the manufacturer or an experienced radio/TV technician for help.
This product, like other radio devices, emits radiofrequency electro- magnetic energy and operates within the guidance found In radio frequency safety standards and recommendations. These standards and recommendations reflect the consensus of the scientific community and result from deliberations of panels and committees of scientists who continually review and Interpret the extensive research literature.
Warranty
Warranty service is limited to normal use. Any man-made damages such as from connecting to an unsuitable power source, using an unsuitable device, or not following the instructions, as well as damages that did not occur during shipping. repairs and adjustments not approved by the company, damages from misuse. inattention, or imp proper installation may cause the warranty to be ineffective immediately. This warranty does not Include shipping fees.
Manufacarer: Shenzhen Anobit Electronics Limited
Address: Ruffing Industrial Patch, No.4197 Baan Byrd, Xian St, Bacon
Dist., Shenzhen, China
Operator: Shenzhen 1Mii Technologies Limited Addressee inhabit Complex
A201, Caiman Road 1, Anahi Shenzhen-Hong Kong Cooperation Zone, Shenzhen,
China We hope you never have the need, but if you do, our service Is friendly
and hassle-free. [email protected]
web:www.1mll.com