Ankbit AKB3518E600G Wireless Headphones Transmitter Set fot TV User Manual
- June 14, 2024
- ankbit
Table of Contents
Ankbit AKB3518E600G Wireless Headphones Transmitter Set fot TV
In the box
Control functions
- Power ON: Hold for 2s.
- Power OFF: Hold for 5s.
- Pairing mode: Press and hold for 2s.
- Reset: Hold for 7s to clear the paired devices, then enter pairing mode automatically.
Overview
Wiring scheme
For TVs with SPDIF port
- If you want to use the “OPT/Coaxial” mode of the TV, please dial the , button to the audio mode of “SPDIF”
- Connect the “OPT/Coaxial” audio cable to the RT5007 transmitter and the TV audio port correctly.
- Note: If there is no sound in “OPT/Coaxial” mode, please set your TV output audio to “PMC”.
- If you want to use the bypass+TX mode at the same time under SPDIF mode, please use “OPT” input and output.
For TVs with AUX/RCA port
- If you want to use the “AUX/RCA” mode of the TV, please dial the to the audio mode of”‘ÁUX”.
- Connect the “AUX/RCA” audio cable to the RT5007 transmitter and the TV audio port correctly.
For PCs with USB port
- If you want to use the “USB” mode of the PC, please dial the to the audio mode of”USB”.
- Connect the “USB” cable to the RT5007 transmitter and the PC usb port correctly.
Headphones Connection
- Turn on the headphone: Press and hold the button for 2 seconds.wait for them automatic connect automatically,Now you can start enjoying the audio.
TV Set Up
- For using TV SPDIF port REMOTE CONTROL
- Go to SETTINGS > Audio > Optical / Digital Out
- For using TV SPDIF port REMOTE CONTROL
- Digital Audio Format > PCM / Stereo OR Dolby – OFF
Note: Need to make sure TV audio format is set to PCM and TV sound out as “External Speakers”
Use with Phone
Charging the headphone
Wired mode
CE
- ANKBIT international. hereby declares that this product is in compliance with the essential requirements and other relevant provisions of Directive 2014/53/EU.
- In accordance with Article 10(2) and Article 10(10), this product is allowed to be used in all Eu member states.
Warranty
Warranty service is limited to normal use. Any man-made damages such as from connecting to an unsuitable power source, using an unsuitable device, or not following the instructions, as well as damages that did not occur during shipping, repairs, and adjustments not approved by the company, damages from misuse, inattention, or improper installation may cause the warranty to be ineffective immediately. This warranty does not include shipping fees.
Disposal
- Always dispose of the used appliance at a recycling centre.
- Do not dispose the used appliance together with household waste.
Contact
eVatmaster Consulting GmbH
- Bettinastr. 30
- 60325 Frankfurt am Main, Germany
- contact@evatmaster.com
- Operator: Ankbit International Limited
- Address: 45-51 Chatham Road South, Tsim Sha Tsui, Kowloon, Hong Kong
- Manufacturer: ShenZhen Ankbit Electronics Limited
- Address: Runfeng Industrial Park, No. 4197 Baoan Blvd., Xixiang St., Baoan Dist., Shenzhen, China
FCC ID: 2AUFR-RT951
MADE IN CHINA
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>