Ankbit RT5008 Wireless Headphones User Manual
- June 10, 2024
- ankbit
Table of Contents
Ankbit RT5008 Wireless Headphones
Control functions
Quick guide
- Plug (The transmitter will automatically power on,).
- Turn on the headset (Wait they automatically reconnect).
WHAT’S IN THE BOX
User guide
How to use a fiber optic connection?
-
Please use the Optical cable to connect the transmitter and TV.
-
Ensure the “OPT” LED on the transmitter is lit.
Ensure your TV’s Sound Out/Speaker setting is set to external Speaker’ or ‘Optical audio out. -
Set your Tv’s Audio Format/Digital Sound Out setting to “PCM’ or set the Dolby/DTS Digital setting to·oFF”.
-
The OPT LED on the transmitter will change to SOLID WHITE when playing TV audio.
Turn on the headphone – Press and hold the button for 2 seconds. wait for
them to connect automatically. Now you can start enjoying the audio.
NOTE: If you don’t know how to change the settings on your TV. or if you
cannot hear anything through your headphone after changing the settings,
please contact your TV manufacturer for support.
How to use AUX/RCA to AUX connection?
- Please use the AUX/RCA to AUX cable to connect the TV and transmitter.
- Ensure the”AUX.LED on the transmitter is on.
- The “AUX” LED will change to SOLID WHITE when playing TV audio.
Turn on Iha headphones – Press and hold the button for 2 seconds. Wait
for them to connect automatically. Now you can start enjoying the audio.
NOTE: If there is no sound playing from your transmitter or if the LED is
still flashing. please set the Sound Out/Speaker setting on your TV to·wired
headphones· or”Headsef.
Add a 2nd pair of Bluetooth headphones
- Turn on the transmitter and headphone set: LED ; will light up.
- Enter the transmitter into PAIRING MODE manually-Hold for 2 seconds until the: LED starts flashing RED and BLUE alternately. – –
- Enter your 2nd set of headphones into Bluetooth PAIRING MODE (Please refer to your 2nd headphone’s user manual). Typically, the LED will either flash quickly or two colors of LED will flash alternately.
- Keep the devices close to each other and wait. Once connected, BOTH and: LEDs on the transmitter will be lit.
Please charge Iha headphones if the headset battery is critically low. The RED LED will flash once every 1 second. You can charge using a phone charger (5V/500mA-2A output).PC USB port, TV USB port, or any other USB outlet using the included USB cable. It takes about 2 hours to fully charge the headphones. The LED will turn RED while charging and turn off once charging is complete.
If the transmitter and headphones fail to reconnect
Reboot both the headphones and the transmitter and give them 5-10 seconds to
reconnect. If they don’t connect, please follow the directions below.
Step 1: Clear the pairing history of Iha headphones: After turning them
on. Press and hold both·+· and·-· for 5 seconds until the LED flashes purple 3
times, then release your hands. Now the pairing history of the headphones has
been cleared. It will enter pairing mode automatically with the LED flashing
RED and BLUE alternately.
Step 2: Clear the pairing history of the transmitter: Turn the
transmitter on then press and hold and for 7 seconds until the LED flashes
purple 3 times and then the red and blue lights flash.
Step 3: Keep the headset and transmitter close to each other and wait for
5-10 seconds. They will auto-reconnect.
Charging the headphone
Wired mode
- EVatmaster Consulting GmbH
- Bettinastr. 30
- 60325 Frankfurt am Main, Germany contact@evatmaster.com.
- Operator: Ankbit International Limited
- Address: 45-51 Chatham Road South, Tsim Sha Tsui, Kowloon, Hong Kong
- Manufacturer: ShenZhen Ankbit Electronics Limited
- Address: Runfeng Industrial Park, No. 4197 Baoan Blvd., Xixiang St., Baoan Dist.,
- Shenzhen, China
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>