Ankbit R7 Outdoor Multinational Lighting Speakers User Manual

Ankbit R7 Outdoor Multinational Lighting Speakers

BOX CONTENT

Product overview

1. Lamp holder
2. Telescopic pole
3. Audio Button
4. Lamp Button
5. Battery indicator light
6. Ambient Light
7. Tripod
8. Tripod switch
9. Microphones
10. USB-A interface
11. Type-C interface

Power on/off

• Lamp: Long press the lamp button for 2S to turn on/off the lamp.
• Bluetooth: long press the Audio Button for 2S to turn on/off Bluetooth speaker.

Pairing

Bluetooth will automatically enter the search state when it is turned on (purple light and blue lightflash alternately). Just open the Bluetooth on your phone and search for the Bluetooth name R7 to connect.

TWS Pairing

After the mobile phone is connected to one R7, turn on the Bluetooth of the other R7, and then quickly click the audio button of any R7 for 5 times in a row to complete TWS pairing. (Quickly click the audio button of any R7 for 5 times in a row to exit the TWS mode)

Key operation

• x1: Press once
•  : Press and hold for 1S
•  : Rotate

• x1: Press once
•  : Press and hold for 1s
•  : Rotate

Power off/on ambient light

After Bluetooth is turned on, the ambient light is turned on by default. Quickly click the audio button for 4 times in a row to turn off/ on the ambient light.

Clear Pairing

When connected, quickly click the audio button for 6 times in a row to clear pairing record.

Reset

When playing without sound or freezing, please press and hold the lamp button for about 8S in any state to reset it.

Powar display

When the Bluetooth speaker and lights are turned off, press and release the lamp button for 0.5 seconds to trigger the fast charge output and battery indicator.

Battery indicator

When using a Bluetooth speaker, the Bluetooth speaker will automatically turn off after 15 minutes after the beep sounds when the battery power is lower than 25%.

FCC

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment in to an outlet or a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Caution: Any changes or modifications to this device not explicitly approved by manufacturer could void your authority to operate this equipment
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

RF Exposure Information

• The device has been evaluated to meet general RF exposure requirement
• The device can be used in portable exposure condition, compliance with exposure requirements.

Warranty

Warranty service is limited to normal use. Any man-made damages such as from connecting to an unsuitable power source, using an unsuitable device, or not following the instructions, as well as damages that did not occur during shipping, repairs, and adjustments not approved by the company, damages from misuse, inattention, or improper installation may cause the warranty to be ineffective immediately. This warranty does not including shipment fees.

Disposal

• Always dispose of the used appliance at a recycling centre.
• Do not dispose the used appliance together with household waste.

ABOUT COMPANY

• Operator: Ankbit International Limited
• Address:45-51 Chatham Road South, Tsim Sha Tsui. Kowloon. Hong Kong
• Manufacturer: Shenzhen Ankbit Electronics Limited
• Address: Runfeng Industrial Park, No. 4197 Baoan Blvd .. Xixiang St., Baoan
• eVatmutar Consultlng GmbH
• Bettinastr. 30
• 60325 Frankfurt am Maln,Gennany
• contact@evatmaster.com

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>