Ankbit B03XX Wireless Audio Adapter User Manual

: June 15, 2024
: ankbit

Table of Contents

Ankbit B03XX Wireless Audio Adapter
IN THE BOX
PRODUCT OVERVEIW
CHARGING THE ADAPTER
CONTROL FUNCTIONS
Operating Instructions
FCC Statement
Warranty
Read User Manual Online (PDF format)
Download This Manual (PDF format)

Ankbit B03XX Wireless Audio Adapter

User mannual

SAFETY PRO

IN THE BOX

PRODUCT OVERVEIW

CHARGING THE ADAPTER

Full dry off the USB port before charging

TX MODE

Press and hold the “OK” button for 1 second, then click the “M” button to select the device to be removed, and then click the “OK” button to confirm.

RX MODE

CONTROL FUNCTIONS

The specific format needs to be supported by the receiving device
Note: In RX mode, if there is a sound delay, please double-click “M” button to improve the sound quality.

Operating Instructions

Transmit mode

Slide Safefly Pro to “TX” mode, press and hold the “OK” button for 2 second to power on, and set your headset/speaker to pairing mode. (Refer to your headphone/speaker owners manual for details,
Search and connect your device to the transmitter
- The screen will display “Searching” after powered on. If not, press and hold the “OK” button for l second to enter the search mode.
- Use the “M’ button to select the device you want to connect to, then click the “OK” button to confirm the connection. The bottom of the screen will say “Connecting
After a successful connection, the device name of the paired product will appear on the screen. Add another headset to the SafeFly Pro: The adapter can use two headsets at the same time; just repeat the previous operation steps to pair and connect the second headset.
Plug Safely Pro into the 3.5mm output port of your mobile phone/Tv/ tablet/PC/laptop/MP3/MP4 projector to enjoy music.

Receive mode

Slide SafeFly Pro to “RX” mode. Press and hold the “OK” button for 2 seconds to turn it on, the screen should now display “Pairing” after powered on, if not, please press and hold the “Ok” button for I second to enter pairing mode.
Turn on the phone to find and click “Safefly Pro” to pair and connect. (if you use a transmitter to connect, you only need to set the transmitter to pairing mode and get close to it to connect automatically)
After the connection is successful the device name of the paired product will appear on the screen. Add another phone to the Safely Pro: The adapter can use two phones at the same time; just repeat the previous operation steps to pair and connect the second phone 4. Plug SafeFly Pro into the 3.5mm input jack of your headphone/speaker to enjoy music.

How to reset the device?

If SafeFly Pro cannot connect or work normally, please refer to the following methods to reset the device: Press and hold the “RESET” button for 5 seconds in the power-on state, the screen will display “Factory setting: and then enter the pairing mode automatically

FCC Statement

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These Emits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, it not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.

If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.

Caution: Any changes or modifications to this device not explicitly approved by manufacturer could void your authority to operate this equipment.

This device complies with part 15 of the FCC Rules, Operation is subject to the following two conditions:

This device may not cause harmful interference, and
This device must accept any interference received, including interference that may cause undesired operation.

CE

ANKBIT international hereby declares that this product is in compliance with the essential requirements and other relevant provisions of Directive 2014/53/EU.
In accordance with Article 10(2) and Article 10(10), this product is allowed to be used in all EU member states.

Warranty

Warranty service is limited to normal use. Any man-made damages such as from connecting to an unsuitable power source, using an unsuitable device, or not following the instructions, as well as damages that did not occur during shipping repairs, and adjustments not approved by the company, damages from misuse, inattention, or improper installation may cause the warranty to be ineffective immediately. This warranty does not include shipping fees.

Disposal

Always dispose of the used appliance at a recycling centre. Do nót dispose the used appliance together with household waste.
master Consulting
- 301 60325 Frankfurt am Main,
- Germany
- contacirevatmaster.com

pares 45-61 China Road South sim Sha Tsui, Kowbon, Hong Kong