ankbit P8 Open Ear Wireless Headphones User Guide

ankbit P8 Open Ear Wireless Headphones User Guide

PACKING LIST

• Open Ear Headphones x2

• Charging Case x1

• Type-C Cable x1

• User Manual x1

OVERVIEW

HOW TO CONNECTION

1. Open the charging case, and take out the wireless open ear earbuds.

2. Activate the “Bluetooth” setting on your phone, search and click “P8” to connect.

Note:

1. Open the charging case, take out the left and right headphones, it will power on and connect automatically.
2. Put earbuds in the charging case, the wireless earbuds will automatically power off.
3. Touch the left or right earbuds 5 times continuously, after the headphones resets successfully, the green light flashes five times quickly

HOW TO WEAR?

Proper Way of Wearing the Earphones:

• Step 1
  

• Step 2
  

• **Step 3

**

While using the earphones, for maximum comfort, please place them on and in your ears as shown above.

Multi-Function Operations

Volume Up

Volume Down

Play/Pause

Answer/End Calls

Next Song

Previous Song

Reset

Reject

Siri

Tap Once(R)

Tap Once(L)

Tap Twice(L/R)

Tap Twice(L/R)

Triple-Tap(R)

Triple-Tap(L)

Five-Tap (L/R)

Hold and Press 3s(L/R)

Hold and Press 3s(L/R)

HOW TO CHARGE

Charging the Earbuds
Put the earbuds into the charging case and close the case.

Charging the Charging Case
Please use 5V/1A adapter with the charging cable to charge the case. (Comes with a USB-C charging cable in the package.)

Charging case is Charging:
Green light flashes Fully Charged: Green light is always on

RESET

When to Reset?

1. When only one side of the earbuds play music. 2.When you can’t make the two earbuds work together.
2. When both of the earbuds fail to pair with each other or other connections issues, etc.

How to Reset?

1. Active the “Bluetooth” of your phone, find “P8”, clear its historical pairing records.
2. Five taps for one of headphone and replace it into charging case and close the cover. (Ensure the other headphone into the case and case is closed. The green light of the headphone will flash 5 times quickly after the clearing is successful.)
3. Five taps the other headphone and replace it into charging case and close the cover. (Ensure the other headphone into the case and case is closed. The green light of the headphone will flash 5 times quickly after the clearing is successful.)
4. Then take out the two headphones again, turn on the “Bluetooth” of your phone, and start pairing again.

SPECIFICATION

1. Model Name: P8 Open Ear Wireless Headphones
2. Bluetooth Version: V5.3
3. Working Voltage: 3.7V
4. Charging Port: Type-C
5. Mic   Qty: 2MIC*2
6. Transmission Distance: 10m/33ft (without obstacles)

Notice :
Low Power: When the mobile phone shows that the power is red, the beep will sound “beep”, “beep” and “beep” once every 60 seconds. The indicator light will follow the beep and flash the red light three times every 60 seconds.

PRODUCT MAINTANCE

1. Never dismantle or refit the product to avoid malfunction or fire hazards.
2. Keep away from corrosive liquids to avoid damage to the product.
3. If there is no sound from one earbud, you need to check if the phone & earbud volume is too low. If the phone & earbuds volume is normal, you need to reset the earbuds.
4. Never touch the earphone with sharp objects, otherwise it will easily cause scratches.
5. Don’t use the product in thunderstorm weather to avoid malfunction or electric shock.
6.  If it has not been used for more than 1 month, please charge and maintain it in time to ensure that it is safe.
7.  Avoid using irritating, organic solvents or articles containing these ingredients.

FCC STATEMENT

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.

This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.

However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna. -Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference
2. this device must accept any interference received, including interference that may cause undesired operation

Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>