moa JE308 Juice Extractor Instruction Manual

June 5, 2024
moa

moa JE308 Juice Extractor

moa-JE308-Juice-Extractor-pro

BEFORE USE

Before use, please read this manual carefully.
Only connect the appliance to an earthed wall socket. This appliance is for household use only. When using electrical appliances, basic safety precautions should always be followed to avoid fires, electric shocks, burns, or other injuries and damage. Read these operating and safety instructions carefully.

IMPORTANT SAFEGUARDS

  1.  This machine is unavailable for the weak, unresponsive, or psychopathic person(including children), unless under the direction or help from the person who has the responsibility for security. Children should be overseen, so it can be testified that they are not playing with it.
  2.  Before using, put this machine on a stable and even table board, operate according to the above methods.
  3.  Before juicing, first confirm juicing net and rotor clutched in position, and no hard contact between juicing net cutter and transparent cover. Put the transparent cover on, fasten tight the handle, then turn on the machine.
  4.  Before being used, the motor works in the running-in phase, there may be a slight peculiar smell and spark, this is normal, after the motor works for some period, the above phenomenon will disappear.
  5.  During juicing, make sure there is not too full juice and residue in the middle seat and residue cup, if too full, please cut off the power supply, clean up, then use again.
  6.  During use, do not open the cup cover. In case of the power supply is on, do not put a hand or any ware into the mixing cup or feed port, otherwise, a harmful accident may occur or this machine may be damaged.
  7.  In order to prolong the service life of this machine and the over-temperature protective device is mounted in the motor. If the motor works for a long time or is overloaded when over warning temperature, the power supply will automatically cut off. After the motor stops, pull out the plug of the power supply, wait for the motor to cool (about 30 min), use it again.
  8.  During operating, please do not leave, never let children operate this machine.
  9.  When this machine works in mixing, mincing, or grinding conditions, no-loaded or over-loaded work is strictly prohibited.
  10.  After an operation, do not pour the food out until pulling out the plug of the power supply.
  11.  Cutters are very sharp, in order to avoid danger, when cleaning a cutter, please put the cutter under water tap for washing, do not wash it with hand.
  12.  This machine must not be used for others beyond regulated purposes.
  13.  In case of a damaged power supply cord, in order to avoid danger, the replacement must be performed by the manufacturer or its service department or similar professional persons.

PARTS & LOCATION

moa-JE308-Juice-Extractor-1

  1.  Pushing bar
  2. Transparent cover
  3.  Juicing net
  4.  Middle ring
  5.  Handle
  6.  Residue barrel
  7.  Main machine
  8.  Juicer jug

PERFORMANCES

  1.  For the juicer with a large diameter, the entire apple or pear can be put in for juicing, no cutting apart is needed, easy and quick.
  2.  Design is fine, simple, and beautiful, with a combined structure, easy to operate and clean.
  3.  High-speed electric motor with overheating protection is adopted, high efficiency, time-saving, energy-saving, the high service life of the motor.
  4.  Safety lock unit for switching is specially designed, in order to make sure safety and reliability in use.

ATTENTION BEFORE USING

  1.  This machine is set with a safety unit, when the handle does not fasten the cover or the cutter seat is not fastened, the motor cannot turn, so as to ensure safety for the user.
  2.  When disassembling or assembling the juicer, press the upper feed port of the cover with your hand, then force the handle to slide in or out of the cover slot.
  3.  When disassembling juicing net, first remove the cover and residue barrel, then turn the middle ring up to 30 degrees by holding juicing nozzle with your hand, and take up, the juicing net will automatically leave the rotor.
  4.  In order to avoid damage, before using, first check the power supply for compliance with rated voltage.
  5.  Clean all parts able to disassemble (refer to the section of “maintenance and cleaning”).
  6.  When assembling, please carefully read the diagram of “name and position of main components”.
  7.  Please carefully read the “attentions” before using.

JUICING

  1.  Before using, please confirm the button switch of the main machine in a stop state, in this way, in case assembly is not completed, starting the main machine can be avoided, so unnecessary damage for persons or property avoided.
  2.  Before juicing, first confirm juicing net and rotor are clutched in position, and no hard contact between juicing net cutter and transparent cover. Put the transparent cover on, put the handle into the cover slot, then turn on the machine.
  3.  For using, assemble according to the diagram of “name and position of main components”. Turn on the power supply, press switch to let the machine run no-load for 5 sec. Put the prepared vegetable or fruit into feed port of the juicer, press with the pushing bar, evenly, hard and slowly, juice of the vegetable or fruit can be found, original, fresh, good for health.
  4.  Note: when pressing food with the pushing bar, force shall be even or indirect, pressing force shall not be more than 1 kg, no too sudden force, otherwise, juicing effect will be reduced.

OPERATING TIME
This machine is designed with button switches of O grading, I grading, II grading (O for stop, I for weak grading, II for strong grading). For juicing, select strong grading, for operating time, after operating for 1min, stop for 1min, then use again. After the above operation is performed three times, stop for 15 min, do not operate until the motor is cooled, in this way, the service life of this machine will be prolonged, the machine will serve you more efficiently.

MAINTENANCE & CLEANING

  1.  This machine shall be often used, so as to keep the motor dry and clean.
  2.  If not using for a long time, please store this machine in a dry and well-ventilated place so as to prevent the motor from being damped and going moldy.
  3.  No washing the main machine. When cleaning, only wipe with a wet cloth. Other components may be washed directly with water, such as pushing the bar, cover, middle seat, residue cup, juice nozzle cover.

DISPOSAL

  • Do not dispose of the device in normal domestic waste.
  • Dispose of the device over a registered waste disposal firm or through your communal waste disposal facility.
  • Observe the currently valid regulations. In case of doubt, consult your waste disposal facility.

WARRANTY

Dear Valued Customer,
Thank you very much for purchasing a MOA product. We wish you to inform you that this product is covered by a warranty which complies with all legal provisions concerning existing warranty and consumer rights in the country where the product was purchased. Should you find any defect or malfunction of your MOA product, please contact the appropriate Customer Care Center. Sincerely yours, The MOA Team

References

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

moa User Manuals

Related Manuals