ankbit E35 Open TWS Headphones User Manual

ankbit E35 Open TWS Headphones

In the box

Product Overview

Headphones

Charging bin

Quick guide

1. The first time you need to use the headset and charging box protective film torn off the headset will be placed in the charging compartment, the white light is always on 25.
2. Mobile phone open Bluetooth, select E35 device to start connecting.

After the first device has been connected

1. Turn off the Bluetooth of the first connected device A, then E35 automatically enter pairing mode; use the second device B to search for E35 and connect.
2. Open the Bluetooth of the first connected device A and connect it manually. This way, Bluetooth is connected to 2 devices

_ Warning: _When connecting 2 devices at the same time, only one device can play music; when device B plays music, please pause the music of device A.

Connect back to the mode

1. Open the charging compartment cover and turn on the device, and automatically connect back to the last two devices connected.
2. Return to the effective distance after long-distance disconnection, automatically connect back to the device just disconnected, the white light will double flash every 5S; 10 minutes without connection automatically enter pairing mode, the white light will flash quickly; 10 minutes without pairing in pairing mode automatically shut down.

Clear pairing

1. Press and hold the headset separately for 5S to turn off the phone.
2. Press and hold the headset for 10 seconds at the same time to clear the pairing record.
3. Clear the phone pairing record after the headset off, put the 2 headset charging bin off the cover, 3 seconds after the cover can be opened to automatically team up, waiting for the connected devices.

Charge the headset

To charge the headset

1. Turn the headset’s pivot to the minimum and align the charging pins of the headset with the charging bin pins.
2. Put the headset into the charging compartment, the charging compartment light goes off for a while and then lights up, indicating that the charging pins are in good contact and the charging compartment automatically charges the headset. The white light of the headset flashes slowly.

Charging bin power indicator status

Warm tip: If not used for a long time, please charge the charging compartment at least once in 30 days.

How To Wear

1. Take the headset out of the charging compartment.
2. Open the headset and adjust the angle between the body of the headset and the ear hook to the maximum.
3. Rotate the whole headset backward and fasten it, so that the ear hook comfortably fits the curve of the back of the ear.
4. Adjust the position of the sound outlet to a comfortable range.

Operations

FCC STATEMENT

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/ TV technician for help.

Caution: Any changes or modifications to this device not explicitly approved by the manufacturer could void your authority to operate this equipment.

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference.
2. This device must accept any interference received, including interference that may cause undesired operation.

RF Exposure Information

• The device has been evaluated to meet general RF exposure requirements.
• The device can be used in portable exposure conditions and compliance with exposure requirements.

EC

• Ankbit international united. hereby declares that this product is in compliance with the essential requirements and other relevant provisions of Directive 2014/53/EU.
• In accordance with Article 10(2) and Article 10(10). this product is allowed to be used in all EU member states.

Warranty

Warranty service is limited to normal use. Any man-made damages such as from connecting to an unsuitable power source, using an unsuitable device, or not following the instructions, as well as damages that did not occur during shipping, repairs, and adjustments not approved by the company, damages from misuse, inattention, or improper installation may cause the warranty to be ineffective immediately. This warranty does not include shipping fees.

Disposal

• Always dispose of the used appliance at a recycling centre.
• Do not dispose the used appliance together with household waste.

Contacts

eVatmaster Consulting GmbH

• Bettinastr. 30 60325 Frankfurt am Main, Germany
• contact@evatmaster.com
• Operator: Ankbit International Limited
• Address: 45-51 Chatham Road South, Tsim Sha Tsui, Kowloon, Hong Kong
• Manufacturer: Shenzhen Ankbit Electronics Limited
• Address: Runfeng Industrial Park, No. 4197 Baoan Blvd., Xixiang St., Baoan Dist., Shenzhen, China
• FCC ID: 2A6ET-RT6135

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>