CD Furniture 36 Headboard Ladder End Bed Frame Instruction Manual
- June 17, 2024
- CD Furniture
Table of Contents
CD Furniture 36 Headboard Ladder End Bed Frame
Product Information
The Ladder End Bed is a versatile and sturdy bed frame that comes in
different sizes depending on the model ordered. It is designed to provide a
comfortable and secure sleeping environment.
The bed frame is made of high-quality materials for durability and longevity.
The assembly process requires specific tools and hardware, which are included
in the package.
Specifications
- Headboard (A) – 1 unit, 36 inches or tall
- Footboard (B) – 1 unit, 16 inches tall
- Bed Rails (C) – 2 units per bed, 75 or 80 inches long
- Slats (D) – 9 units, twin = 40-1/4 inches, double = 55-1/4 inches, queen = 61-1/4 inches long
- Connector Bolts (E) – 8 units, 100mm long
- Cross Dowels (F) – 8 units
- Wood Screws (G) – 18 units
- Allen Key (H) – 1 unit
Tools Required
- Slotted screwdriver
-
2 Robertson or Phillips screwdriver
- Allen key (H)
Assembly Steps
Please read all instructions before beginning.
- Place the headboard (A) and footboard (B) in the desired location for the bed.
- Attach the bed rails (C) to the headboard and footboard using the connector bolts (E) and cross dowels (F). Refer to Figure 1 for the correct position of the bed rail, bed end, and hardware.
- Secure the connection by tightening the connector bolts and cross dowels using the Allen key (H).
- Insert the slats (D) evenly across the bed frame, ensuring they are properly aligned.
- Use the wood screws (G) to secure the slats to the bed rails for added stability.
Once the assembly is complete, ensure all connections are tight and secure before placing a mattress on the bed frame.
For any additional assistance or inquiries, please refer to the official website www.cratedesigns.ca.
Ladder End Bed Assembly Instructions
Contents : sizes vary depending on model ordered
- (A) = 1 headboard (36” or tall)
- (B) = 1 footboard (16” tall)
- (C) = 2 bed rails per bed (75” or 80” long)
- (D) = 9 slats (twin = 40-1/4”, double = 55-1/4” queen = 61-1/4” long)
- (E) = 8 connector bolts (100mm long)
- (F) = 8 cross dowels
- (G) = 18 wood screws
- (H) = 1 Allen key
Tools required
- Slotted screwdriver
-
2 Robertson or Phillips screwdriver
Please read all instructions before beginning
- Assemble bed using 2 bed rails (C), headboard (A), footboard (B) and 8 connector bolts (E), with 8 cross dowels (F). Refer to “Figure 1” for correct position of bed rail, bed end and hardware.
- Slide 9 slats (D) into the bed rail grooves and secure each slat with 2 wood screws (G) using predrilled holes, refer to “Figure 3”. Position 1 slat 3” from each bed end and 7 evenly spaced in between. Ensure that the spaces between slats are less than 3 ½”.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>