Braeburn 7300 Programmable Smart Wi-Fi Thermostats User Manual
- October 30, 2023
- Braeburn
Table of Contents
- Braeburn 7300 Programmable Smart Wi-Fi Thermostats
- Features
- About Your Thermostat
- Thermostat Display
- Setting User Options
- Service Monitors
- Extended Hold Period
- Temporary Override Adjustment Limit
- Program Override Time Limit
- Wi-Fi Clear
- Setting Your Program Schedule
- Energy Saving Programs
- Programming a 7 Day Commercial Schedule
- Operating Your Thermostat
- Additional Operation Features
- Thermostat Maintenance
- Limited Warranty
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
Braeburn 7300 Programmable Smart Wi-Fi Thermostats
View all Braeburn thermostat manual
Features
Congratulations! You are in control of one of the easiest-to-use thermostats on the market today. This thermostat has been designed to provide you with years of reliable performance and comfort control.
- Optional Wi-Fi connectivity – control and monitor the thermostat from a smartphone, tablet or computer.
- 7-day, 5-2 day or non-programmable
- Auto or manual changeover
- Residential or commercial modes
- The large 5 sq. in. bright blue backlit display is easy to read.
- Extra large display characters make viewing settings even easier.
- User-selectable service monitors remind you of required system maintenance.
- Precise temperature accuracy keeps you in control of your comfort.
- Convenient programmable and circulating fan modes.
- Optional indoor or outdoor remote sensing.
About Your Thermostat
Thermostat Display
- Room Temperature……………………Displays the current room temperature
- Set Temperature……………………….Displays the current set point temperature
- Outdoor Temperature Indicator…..Displays along with the outdoor temperature reading**
- BACK Indicator*………………………..The BACK button is active
- NEXT Indicator*………………………..The NEXT button is active
- Service Indicators ……………………Displays various service/maintenance information
- Fan Indicator…………………………….Indicates when the system fan is running
- Wi-Fi Indicator………………………… .Indicates when connected to Wi-Fi (flashes when the connection has been lost)
- Low Battery Indicator………………..Indicates when the batteries need to be replaced
- Hold Mode Indicator ………………… Indicates if the thermostat is in HOLD mode
- Lock Mode Indicator …………………Indicates if the thermostat is locked
- System Status Indicator ……………Displays information about the status of the system
- Day of the Week………………………..Displays the current day of the week
- Program Event Indicator……………Displays the program event
- Time of Day ……………………………..Displays the current time of day
BACK and NEXT are secondary functions of the PROG and HOLD buttons. When in programming or configuration modes, BACK and NEXT appear in the display screen indicating that the PROG and HOLD buttons now function as BACK and NEXT
-
Reset Button …………………………… Resets current time, program, and user settings
-
SYSTEM Button…………………………Selects the system you want to control
-
DAY/TIME Button……………………….Sets the current time and day of the week
-
PROG Button…………………………….Selects programming mode or press for 3 seconds to select SpeedSet®
BACK Button*……………………………The secondary function of the PROG button – moves back a setting -
HOLD Button……………………………..Enters/Exits the HOLD mode (program bypass)
NEXT Button*……………………………A secondary function of the HOLD button – moves to next setting -
RETURN Button…………………………Returns to normal mode from program or setting modes
-
FAN Button……………………………….Selects the system fan mode
-
Quick Reference Instructions……..Stored in slot located at top of the thermostat
-
SpeedBar® ……………………………… .Increases or decreases settings (time, temperature, etc.)
-
Outdoor Temperature………………… If a Braeburn® outdoor sensor was connected you can view the outdoors. temperature by pressing the PROG and HOLD buttons at the same time.
Battery Compartment………………..Located in the back of the thermostat
Setting User Options
Advanced User Options
User options allow you to customize some of your thermostat’s features. Most
users will not need to make any changes to the settings in this section. To
access the User Options menu, press and hold the RETURN button for
approximately 3 seconds until the screen changes and displays the first User
Option. Press the SpeedBar® or to change the setting for the displayed User
Option. After you have changed your desired setting, press NEXT (HOLD) to
advance to the next User Option. You may also press BACK (PROG) to move
backward through the User Options. When your changes are complete, press
RETURN to exit.
Table of User Options
NOTE: Some user options may not be available, depending on how your thermostat was configured in the Installer Settings (see Installer Guide). A detailed description of each User Option follows this table.
No.| User Options| Factory Default| Setting
Options| Comments| Pg.
---|---|---|---|---|---
1| Filter Service Monitor| OFF| OFF| Disables filter service monitor feature.|
10
30, 60, 90,120, 180, 365| Selects a number of days that must pass before the
thermostat will flash a Service Filter reminderin the display screen.
2| UV Light Service Monitor| OFF| OFF| Disables UV service monitor feature.|
10
180, 365| Selects a number of days before the thermostat will flash a Service
UV reminder in the display screen.
3| Humidifier Pad Service Monitor| OFF| OFF| Disables pad service monitor
feature.| 10
180, 365| Selects a number of days before the thermostat will flash a Service
Humid reminder in the display screen.
4| Extended Hold Period| LONG| LONG| Selects long (permanent) hold mode.|
10
24HR| Selects 24 hour (temporary) hold mode.
5| Temporary Override Adjustment Limit| 0 ADJ| 0, 1, 2, or 3ADJ 0| Selects a
temporary temperature adjustment limit of 0 (disabled), 1˚, 2˚ or 3˚.| 11
6| Program Override Time Limit| 4 TEMP| 4, 3, 2 or 1 TEMP| Selects a temporary
program override time limit of 1, 2, 3 or 4 hours.| 11
7| Thermostat Lock Code| 000| 0-9| Select a 3 digit lock code of 0-9 for each
digit.| 11
8| Wi-Fi Clear| WIFI| WIFI| No changes to Wi-Fi network settings.| 12
CL WIFI| Clears Wi-Fi network settings.
Service Monitors
(Filter, UV and Humidifier Pad)
User Options 1, 2 and 3
There are three user-selectable service monitors that will display reminders
for a required air filter, UV bulb or humidifier pad replacement. The SERVICE
segment flashes in the display along with FILTER, UV or HUMID. When the
service interval has been reached, and required cleaning or replacement has
been performed, press the RETURN button to reset the timer. Select OFF or a
set number of days before the reminder will appear.
Extended Hold Period
User Option 4
The Extended Hold Period lets you select the period your thermostat will
hold the temperature when the HOLD mode is activated (See Setting the
Temperature, page 23). When LONG is selected the thermostat will hold your
temperature indefinitely. When 24HR is selected, the thermostat will hold your
temperature for 24 hours and then return to the current program at that time.
Not available in non-programmable mode.
Temporary Override Adjustment Limit
User Option 5
The Temporary Override Adjustment Limit will limit how much the temperature
can be adjusted from the current set point when the thermostat is used in the
programmable mode. This setting will not allow the user to override the
temperature past the selected limit amount of 1, 2 or 3 degrees from the
current set point. When the user reaches the adjustment limit the screen will
flash ADJ. A setting of 0 disables the adjustment limit. The Temporary
Override Adjustment Limit can also be used in the non-programmable mode if the
keypad lockout security level is set to level 1 (See Installer Guide).
Program Override Time Limit
User Option 6
The Program Override Time Limit allows you to set a maximum time limit (in
hours) that the thermostat will return to the program after a temporary
temperature adjustment has been made (See Setting the Temperature, page 23).
You may select 1, 2, 3 or 4 hours. Not available in non-programmable mode.
Thermostat Lock Code
User Option 7
The Thermostat Lock Code sets a 3-digit code that you may use at any time to
lock or unlock the thermostat. Setting the code in the user options mode does
not activate the lock feature (See Locking/Unlocking Thermostat, page 28). You
may choose a 3-digit code with each digit being 0-9.
Wi-Fi Clear
User Option 8
Use this setting if you no longer want to be connected to your Wi-Fi network
or if you change Wi-Fi routers. Select WIFI to skip changes to your network
settings. Select CL WIFI to clear all Wi-Fi network settings. You can set up
Wi-Fi again at a later time if desired (see Wi-Fi Setup Guide).
Setting Your Program Schedule
Setting the Time and Day
- In normal operating mode, press the DAY/TIME button. The display will switch to the day/time setting mode and the hour will be flashing.
- Press the SpeedBar® up or down to adjust the hour, press NEXT.
- Press the SpeedBar up or down to adjust the minute, press NEXT.
- Press the SpeedBar up or down to adjust the day of the week.
- Press RETURN to exit.
NOTE : If the Wi-Fi feature is used, the clock will adjust automatically to the time zone and DST (Daylight Savings Time) set up in the Wi-Fi feature.
Tips Before Setting Your Program Schedule
- Make sure your current time and day of the week are set correctly.
- When programming, make sure the AM and PM indicators are correct.
- Various installer settings such as auto changeover mode and temperature adjustment limits may affect your programming flexibility.
- Your NIGHT event cannot exceed 11:50 p.m.
- BACK and NEXT are secondary functions of the PROG and HOLD buttons (see page 7).
This thermostat has been configured with one of the following programming options
- Residential 7 day programming mode with 4 events per day (default)
- Residential 5-2 (weekday/weekend) programming mode with 4 events per day
- Commercial 7 day programming mode with 2 events per day
- Non-Programmable mode
NOTE: If this thermostat was configured In the Installer Settings to be non-programmable, then you cannot set a user program. If you press the PROG or HOLD buttons, the word “NONE” will appear in the display, indicating there is no program present. See the Installer Guide for different configuration options. (Program changes can be made at the thermostat or from the BlueLink Smart Connect® application on your smartphone, tablet or PC.)
Energy Saving Programs
This thermostat comes pre-programmed with a default energy saving program. The following tables outline the pre-programmed times and temperatures for heating and cooling in each of your 4 daily events (2 events if configured for commercial mode). If you wish to use these settings then no further programming is necessary:
Residential 7 Day Programming Factory Settings
4 Event| All Days
MORN| Time: 6:00 am Heat: 70˚ F (21˚ C) Cool: 78˚ F (26˚ C)
DAY| Time: 8:00 am Heat: 62˚ F (17˚ C) Cool: 85˚ F (29˚ C)
EVE| Time: 6:00 pm Heat: 70˚ F (21˚ C) Cool: 78˚ F (26˚ C)
NIGHT| Time: 10:00 pm Heat: 62˚ F (17˚ C) Cool: 82˚ F (28˚ C)
Commercial 2 Event Programming Factory Settings
2 Event| All Days
OCCUPIED
| Time: 8:00 am Heat: 70˚ F (21˚ C) Cool: 78˚ F (26˚ C)
UNOCCUPIED
| Time: 6:00 pm Heat: 62˚ F (17˚ C) Cool: 85˚ F (29˚ C)
Residential 5-2 Day Programming– Weekday/Weekend
Factory Settings
4 Event| Weekday| Weekend
MORN| Time: 6:00 am Heat: 70˚ F (21˚ C) Cool: 78˚ F (26˚ C)| Time: 6:00 am
Heat: 70˚ F (21˚ C) Cool: 78˚ F (26˚ C)
DAY| Time: 8:00 am Heat: 62˚ F (17˚ C) Cool: 85˚ F (29˚ C)| Time: 8:00 am
Heat: 62˚ F (17˚ C) Cool: 85˚ F (29˚ C)
EVE| Time: 6:00 pm Heat: 70˚ F (21˚ C) Cool: 78˚ F (26˚ C)| Time: 6:00 pm
Heat: 70˚ F (21˚ C) Cool: 78˚ F (26˚ C)
NIGHT| Time: 10:00 pm Heat: 62˚ F (17˚ C) Cool: 82˚ F (28˚ C)| Time: 10:00 pm
Heat: 62˚ F (17˚ C) Cool: 82˚ F (28˚ C)
Programming a 7 Day Residential Schedule
The 7 day residential programming mode gives you the option to program individual days (1 day at a time) or to use SpeedSet and program the entire week (all 7 days) with a 4 event program schedule.
Setting All 7 Days at Once (SpeedSet®)
NOTE: Setting all 7 days at once will copy over any previously
programmed individual days.
- Hold the PROG button for 3 seconds. The display will switch to SpeedSet programming mode. All 7 days of the week will appear and the hour will be flashing.
- Press SYSTEM to select HEAT or COOL.
- Press the SpeedBar® up or down to adjust the hour for the MORN (morning) event. Press NEXT.
- Press the SpeedBar up or down to adjust the minute for the MORN event. Press NEXT.
- Press the SpeedBar up or down to adjust the temperature for the MORN event. Press NEXT.
- Press the SpeedBar up or down to adjust the fan setting for the MORN event. Press NEXT.
- Repeat steps 3-6 for the DAY, EVE and NIGHT events.
- If needed, repeat steps 2-7 to program the opposite mode (HEAT or COOL).
- Press RETURN to exit.
Setting Individual Days (7 Day Residential)
- Press the PROG button. The display will switch to programming mode. M (Monday) will be displayed and the hour will be flashing.
- Press SYSTEM to select HEAT or COOL.
- Press DAY/TIME to select the day you would like to program.
- Press the SpeedBar® up or down to adjust the hour for the MORN (morning) event. Press NEXT.
- Press the SpeedBar up or down to adjust the minute for the MORN event. Press NEXT.
- Press the SpeedBar up or down to adjust the temperature for the MORN event. Press NEXT.
- Press the SpeedBar up or down to adjust the fan setting for the MORN event. Press NEXT.
- Repeat steps 4-7 for your DAY, EVE and NIGHT events.
- If needed, repeat steps 3-7 to select a different day to program.
- If needed, repeat steps 2-9 to program the opposite mode (HEAT or COOL).
- Press RETURN to exit.
Programming a 5-2 Day Residential Schedule
The 5-2 day residential programming mode allows you to program Monday – Friday with one 4 event schedule and then allows you to change Saturday and Sunday with a different 4 event schedule.
- Press the PROG button. The display will switch to programming mode. The days M, TU, W, TH, and F will be displayed and the hour will be flashing.
- Press SYSTEM to select HEAT or COOL.
- Press the SpeedBar® up or down to adjust the hour for the MORN (morning) event. Press NEXT.
- Press the SpeedBar up or down to adjust the minute for the MORN event. Press NEXT.
- Press the SpeedBar up or down to adjust the temperature for the MORN event. Press NEXT.
- Press the SpeedBar up or down to adjust the fan setting for the MORN event. Press NEXT.
- Repeat steps 3-6 for your DAY, EVE and NIGHT events.
- Repeat steps 3-7 for your weekend (S, SU) program.
- If needed, repeat steps 2-9 to program the opposite mode (HEAT or COOL).
- Press RETURN to exit.
Programming a 7 Day Commercial Schedule
The 7 day commercial programming mode gives you the option to program individual days (1 day at a time) or to use SpeedSet and program the entire week (all 7 days) with a 2 event program schedule.
Setting All 7 Days at Once (SpeedSet®)
NOTE: Setting all 7 days at once will copy over any previously
programmed individual days.
- Hold the PROG button for 3 seconds. The display will switch to SpeedSet programming mode. All 7 days of the week will appear and the hour will be flashing.
- Press SYSTEM to select HEAT or COOL.
- Press the SpeedBar® up or down to adjust the hour for the OCCUPIED event. Press NEXT.
- Press the SpeedBar up or down to adjust the minute for the OCCUPIED event. Press NEXT.
- Press the SpeedBar up or down to adjust the temperature for the OCCUPIED event.
- Press NEXT. Press the SpeedBar up or down to adjust the fan setting for the OCCUPIED event. Press NEXT.
- Repeat steps 3-6 for your UNOCCUPIED event.
- If needed, repeat steps 2-7 to program the opposite mode (HEAT or COOL).
- Press RETURN to exit.
Setting Individual Days (7 Day Commercial)
- Press the PROG button. The display will switch to programming mode. M (Monday) will appear and the hour will flash.
- Press SYSTEM to select HEAT or COOL.
- Press DAY/TIME to select an individual day.
- Press the SpeedBar® up or down to adjust the hour for the OCCUPIED event. Press NEXT.
- Press the SpeedBar up or down to adjust the minute for the OCCUPIED event. Press NEXT.
- Press the SpeedBar up or down to adjust the temperature for the OCCUPIED event. Press NEXT.
- Press the SpeedBar up or down to adjust the fan setting for the OCCUPIED event. Press NEXT.
- Repeat steps 4-7 for your UNOCCUPIED event.
- If needed, repeat steps 3-7 to select other individual days.
- If needed, repeat steps 2-9 to program the opposite mode (HEAT or COOL).
- Press RETURN to exit.
Operating Your Thermostat
Setting the SYSTEM Control Mode
The System Control has 5 modes of operation – AUTO, COOL, OFF, HEAT and EMER.
The mode can be selected by pressing the SYSTEM button to scroll through the
different modes.
NOTE: Depending on how your thermostat was configured, some system modes
may not be available.
- AUTO The system will cycle between heating and cooling automatically based on your program set points. AUTO will be displayed with either HEAT or COOL.
- COOL Only your cooling system will operate.
- OFF Heating and cooling systems are off.
- HEAT Only your heating system will operate
- EMER Operates a backup heat source (Emergency Heat) for heat pump systems only.
Setting the FAN Control Mode
The Fan Control has 3 modes of operation – AUTO, ON, and PROG. The mode can be
selected by pressing the FAN button to scroll through the different modes.
- NOTE: Depending on how your thermostat was configured, some fan modes may not be available.
- AUTO The system fan will run only when your heating or cooling system is running.
- ON The system fan stays on.
- CIRC The system fan will run intermittently to help circulate air and provide more even temperature distribution when the heating or cooling system is not active.
- PROG The system fan will function in the AUTO or ON modes depending on your program schedule.
Setting the Temperature
- Temporary Adjustment – Press the SpeedBar® up or down to adjust the current set temperature. If your thermostat is running in 5-2 or 7 day programmable mode, the set temperature will change back to your original programmed settings when your next scheduled change in temperature occurs.
- Extended Adjustment – Press the HOLD button
so that HOLD appears in the display screen. Press the SpeedBar up or down to adjust the current set temperature (See Extended Hold Period, page 10).
NOTE: If this thermostat was configured to be non-programmable, you will not have a HOLD option.
Status Indicators
Status indicators appear in the display to let you know if your system is
heating, cooling or off.
-
HEAT ON Heating system is running.
-
COOL ON Cooling system is running.
-
AUX Auxiliary stage of heating is running (multi-stage systems only).
-
EMER Emergency heating system is running (heat pump systems only).
-
CHECK There is a potential problem with your system.
Contact a local service technician (model 7305 only). -
SERVICE User selectable service reminder for changing a filter, UV air purifier bulb or humidifier pad (see Service Monitors, page 10).
-
ADJ Temperature adjustment limit has been reached.
-
The thermostat is connected to the Wi-Fi network (flashes if the connection is lost).
-
The thermostat battery is low (see Thermostat Maintenance, page 31).
NO POWR AC Power to the system has been lost (see page 29).
Program Event Indicators
Program event indicators appear in the display to let you know what part of
your current program is active.
- In Residential Program Mode, MORN, DAY, EVE or NIGHT will appear.
- In Commercial Program Mode, OCCUPIED or UNOCCUPIED will appear. When the program event indicator is flashing, your program has been temporarily bypassed and will resume at the next scheduled event.
NOTE: You will not see a program event indicator while in HOLD or Non- Programmable Mode.
Resetting the Thermostat
This thermostat provides you with a reset button that will erase all of your
user settings and programming.
The reset feature does not affect the Installer Settings.
To reset the thermostat, use a small object such as a toothpick or paperclip
and gently press the button located inside the small hole on the front of the
thermostat housing labeled “RESET ”.
NOTE: You cannot reset the thermostat if it is locked.
Additional Operation Features
Auto Changeover Mode
Auto Changeover mode is a feature enabled/disabled in the Installer Settings
(see Installer Manual). If enabled, it is selected by pressing the SYSTEM
button until AUTO HEAT or AUTO COOL appears in the display. When Auto
Changeover mode is enabled and selected, the system automatically switches
between heating and cooling when the room temperature meets the programmed
heating or cooling set points. To operate properly, the thermostat requires a
“dead band” setting to eliminate program conflicts. The dead band is set in
the Installer Settings (See Installer Guide). The default setting is 3° F.
Therefore, you will not be able to set your heat or cool temperature within 3°
F of each other. If a setting is made in either heating or cooling which
violates the dead band, the opposite mode will adjust up or down automatically
to maintain the programmed dead band spacing.
Adaptive Recovery Mode (ARM™)
Adaptive Recovery Mode is a feature enabled/disabled in the Installer Settings
(See Installer Guide).
If enabled, the feature is automatically present while in programmable mode.
Adaptive Recovery Mode tries to reach your desired heating or cooling
temperature at the time you have set in your current program schedule, after a
setback period. For example, if you set your heat down to 62° at night and
have a set point of 70° scheduled for 7:00 AM, the thermostat may turn on your
heating system early in order to achieve a temperature of 70° by 7:00 AM. This
feature does not operate when the thermostat is in HOLD mode if the program is
temporary if emergency heat is selected on a multistage heat pump system.
Programmable Fan Mode
Programmable Fan Mode is selected by pressing FAN until PROG appears in the
display. It is only available in 7 or 5-2 Day programmable mode.
Programmable Fan Mode allows the user to run the fan continuously during a
selected program event. To use this feature, select fan ON while setting
program events.
(See “Setting Your Program Schedule”, page 13).
Compressor Protection
Compressor protection is enabled/disabled in the Installer Settings (See
Installer Guide). If enabled, this feature is automatically present in cooling
and/or heating modes. This thermostat includes an automatic compressor
protection delay to avoid potential damage to your system from short cycling.
This feature activates a short delay after turning off the system compressor.
Additionally, for multi-stage heat pump systems, this thermostat provides cold
weather compressor protection by locking out the compressor stage(s) of
heating for a period of time after a power outage greater than 60 minutes.
This cold weather compressor protection can be manually overridden at any time
by changing the system mode to OFF momentarily, then back to HEAT.
Locking and Unlocking the Thermostat
Your 3-digit Lock Code is set in the “User Options” portion of this manual
(See “Setting User Options”, page 8, 9 and 11). Once the code is set, the
thermostat can be locked or unlocked at any time by entering that code. To
lock or unlock the thermostat, press and hold the DAY/TIME and HOLD buttons
together for 5 seconds. The screen will change, displaying 000 and LOCK will
be flashing. Press the SpeedBar® or to enter the first digit of your lock code
and then press
NEXT to advance to the next digit. Repeat this process to enter the second
and third digit of your lock code. After entering the third digit, press
RETURN. BACK and NEXT are secondary functions of the PROG and HOLD buttons.
If you entered a valid code the thermostat will be locked or unlocked
(depending on its previous state).
When locked, the word LOCKED appears in the display (Figure 1). If an invalid
code is entered the word NO will briefly appear, indicating that an incorrect
code was entered (Figure 2).
AC Power Monitor
The AC Power Monitor feature is enabled in the Installer Settings (See
Installer Guide). If enabled, this feature will automatically be present. If
your thermostat was hardwired (power provided from the system with batteries
as a backup) then the AC Power Monitor feature will indicate when a loss of
power to the thermostat has occurred by flashing NO POWR. ****
Indoor Remote Sensing
Indoor remote sensing is achieved by installing a Braeburn® remote indoor
sensor and is configured in the Installer Settings (See Installer Guide).
If a Braeburn indoor remote sensor was installed and properly configured in
the Installer Settings, the thermostat will sense temperature at a remote
location or a combination of a remote location and the thermostat location.
Outdoor Remote Sensing
Outdoor remote sensing is enabled by installing a Braeburn® remote outdoor
sensor. No additional configuration is required. If a Braeburn outdoor remote
sensor was installed you may press the PROG and HOLD buttons at the same time
to view the outdoor temperature.
Thermostat Maintenance
Thermostat Cleaning
Never spray any liquid directly on the thermostat. Using a soft damp cloth
wipe the outer body of the thermostat. Never use any abrasive cleansers to
clean your thermostat.
Changing the Batteries
This thermostat requires two (2) properly installed “AA” alkaline batteries to
maintain the thermostat clock and to provide power for the thermostat if
24-volt AC power is not connected. (See Installer Guide).
If batteries become low, a battery indicator will appear on the display. You
should change your batteries immediately when you see the low battery signal
by following
these instructions.
- Remove the thermostat body by gently pulling it from the base.
- Remove old batteries and replace them with new batteries.
- Make sure to correctly position the (+) and (-) symbols.
- Gently push the thermostat body back onto the base.
NOTE: We recommend replacing the thermostat batteries annually or if the thermostat will be unattended for an extended period of time.
Limited Warranty
When installed by a professional contractor, this product is backed by a 5-year limited warranty. Limitations apply. For limitations, terms and conditions, you may obtain a full copy of this warranty:
- Visit us online: www.braeburnonline.com/warranty
- Phone us: 866.268.5599
- Write us: Braeburn Systems LLC 2215 Cornell Avenue Montgomery, IL 60538
Store this manual for future reference.
For additional information visit: www.braeburnonline.com For online access
visit: www.bluelinksmartconnect.com
- Braeburn Systems LLC
- 2215 Cornell Avenue Montgomery, IL 60538
- Technical Assistance: www.braeburnonline.com
- Call us toll-free: 866-268-5599 (U.S.)
- 630-844-1968 (Outside the U.S.)
- ©2019 Braeburn Systems LLC All Rights Reserved Made in China.
Braeburn 7300 Programmable Smart Wi-Fi Thermostats User Manual