LifeStraw Peak Series Personal Water Filter Straw User Manual
- June 5, 2024
- LifeStraw
Table of Contents
LifeStraw Peak Series Personal Water Filter Straw
HOW TO USE
- Sip. Open the top cap and take 5 quick, strong sips to get water flowing.
- Backwash. Regularly blow air through your filter after drinking to keep the filter clean and prevent it from clogging. Close both caps when not in use.
- If using with a standard water bottle, unscrew the bottom cap of the straw, fill the water bottle with source water, and screw the bottom of the straw to the water bottle. Squeeze water through the straw.
- If using with a gravity system, attach the hose to the bottom of the straw filter, open the cap and allow water to flow out of the mouthpiece.
If storing your LifeStraw Peak Series Personal Water Filter Straw for greater than 1 month without use, we recommend following our long term storage instructions to preserve the longevity of the filter and to prevent clogging.
LONG-TERM STORAGE INSTRUCTIONS
Avoid drying out the filter by storing with a saline solution made by mixing a teaspoon of salt with water. This will keep the filter at its highest performance and maintain the hydrophilic properties of the membrane, while also preventing any mold or algae from growing during long-term storage. When the membrane becomes completely dried out, it can be difficult to get water to flow through again. Follow these steps if you have already used the LifeStraw Peak Series filter and you plan to store for greater than 1 month without use. If storing for longer than 3 months, we recommend cleaning with a diluted bleach solution prior to storage for increased disinfection. These instructions can be found at www.lifestraw.com.
- Immerse in Salt Solution. Fill a reusable container with 2 cups of water, add 1 teaspoon of salt and dissolve. With the bottom cap open, take a few small sips of salt water until the solution reaches the top mouthpiece. Close the caps to prepare for storage and to hold the saline solution inside.
- Store. Place the water filter straw into a reusable container and store in a cool, dry place.
- Resume Use. To use your water filter straw again, blow any remaining solution out of the filter.
We recommend spitting out the first few sips of water as they may still taste
salty. If you have additional questions about storage and maintenance for your
LifeStraw Peak Series products, please email us at
remy@lifestraw.com
TIPS
Test your gear before you go! Follow the instructions to make sure your
LifeStraw Peak Series Personal Water Filter Straw is operating as you expect
it to. If you have difficulty drawing in water during first use, try priming
the filter to make sure it’s hydrated. Do this by opening the bottom cap and
letting the straw sit in water for 20 seconds. Slow flow rate? Blow air
through mouthpiece to remove potential air bubbles in the membrane.
Note: LifeStraw Peak Series Personal Water Filter Straw will no longer
filter water when the product has reached the end of its working life.
Inability to sip water through the filter indicates that the product should be
replaced. Questions? Contact remy@lifestraw.com – we’re here to help!
DISCLAIMER
Vestergaard Frandsen Inc. and its affiliated entities and related companies
shall be neither liable for any damages arising out of or as a result of the
use of LifeStraw Peak Series Personal Water Filter Straw for any purpose other
than for which it is clearly intended, nor for any malfunction resulting from
the failure of the user of LifeStraw Peak Series Personal Water Filter Straw
to strictly abide by the usage and safety information contained in this
manual. Stated microbiological and longevity performance of LifeStraw Peak
Series Personal Water Filter Straw is conducted under standard laboratory test
conditions; more information regarding test results and conditions can be
found at www.lifestraw.com. The effectiveness of LifeStraw Peak Series Personal
Water Filter Straw may be limited by environmental or hygienic conditions that
could contribute to the recontamination of water after it has passed though
the product’s internal filter. These conditions include but are not limited
to:
- Handling the mouthpiece with dirty / contaminated hands.
- Failure to maintain a clean mouthpiece and exterior.
- Failure to discontinue use of the product per manufacturer’s recommendations.
- Using the filter if the plastic is cracked.
- Use in or exposure to extreme heat (higher temperature than 140°F/60°C) or freezing temperatures (below 32° F/0°C).
Read these usage and safety instructions carefully before using LifeStraw Peak Series Personal Water Filter Straw. LifeStraw Peak Series Personal Water Filter Straw is a personal water filtration tool and should only be used for filtering water. The quality of the filtered water is not guaranteed if the product is submitted to conditions other than those encountered during its normal use. Your use of LifeStraw Peak Series Personal Water Filter Straw implies that you accept and agree to these terms, conditions, and disclaimer.
CAUTION
Drinking untreated water may expose you to harmful microorganisms and increase your risk of gastrointestinal illness. Improper usage of LifeStraw® increases your risk of exposure to harmful microorganisms and increases your risk of gastrointestinal illness. Reduce your risk of becoming sick by following these safety instructions and by educating yourself on backcountry water safety. Never use LifeStraw® to filter seawater or chemically contaminated water, including water from mining tailing ponds or from near large agricultural operations. Rinse the bottle and top cap with safe water before first use. DO NOT DROP or place pressure on this product in any manner. The intentional or unintentional impact of this product on a solid surface may damage the filtration mechanism within the LifeStraw® and render it inefficient and unusable. This product must not be used by children without the supervision of an adult.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>