LifeStraw Peak Series Gravity Purifier User Manual
- June 12, 2024
- LifeStraw
Table of Contents
Peak Series Gravity Purifier
Product Information
The Gravity Purifier is a water filtration system designed to provide safe drinking water by removing impurities. It consists of a membrane ultrafilter cartridge and a dirty water gravity bag.
Long Term Storage Instructions
- Backwash the membrane ultrafilter according to the backwashing instructions provided.
- Rinse the dirty water gravity bag, basket, cap, and hose with safe water.
- Fill the dirty water bag with safe water until the max line and add 1/2 teaspoon of household bleach. Close the cap and shake the bag a few times to mix well.
- Connect the hose to the filter, hang the gravity system, and twist to allow the flow of water through the filter until the gravity bag is empty.
- Disconnect the filter and keep it vertical for a few moments until no water runs out. Do not shake the filter.
- Twist to close the membrane ultrafilter cartridge, keep the hose attached to the filter, and roll it around.
- Allow the dirty water gravity bag to dry naturally by leaving the cap removed.
- Store the Gravity Purifier in a cool, clean place.
Note: After long-term storage, filter one batch of water and discard it to rinse the system. Your system is ready to be used again.
If you have additional questions about storage and maintenance for your LifeStraw Peak Solo Water Filter, please contact us at info@lifestraw.com.
GRAVITY PURIFIER
LONG TERM STORAGE
- Backwash membrane ultrafilter according to backwashing instructions.
- Rinse the dirty water gravity bag, basket, cap, and hose with safe water.
- Fill the dirty water bag with safe water until max line and add 1/2 teaspoon of household bleach. Close the cap and shake the bag a few times to mix well
- Connect the hose to the filter, hang the gravity system, and twist to allow the flow of water through the filter until the gravity bag is empty.
- Disconnect the filter and keep vertical a few moments until no water runs out. Do not shake the filter.
- Twist to close the membrane ultrafilter cartridge, keep the hose attached to the filter and roll it around.
- Allow the dirty water gravity bag to dry naturally, by leaving the cap removed.
- Store in a cool, clean place.
Note: After long time storage, filter one batch of water and discard it to rinse the system.
- Your system is ready to be use again.
- If you have additional questions about storage and maintenance for your LifeStraw Peak Solo
- Water Filter, please contact us at info@lifestraw.com
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>