LifeStraw Peak Series 8L Gravity Water Filter System and 8L Safe Storage Bag User Manual
- June 5, 2024
- LifeStraw
Table of Contents
Peak Series 8L Gravity Water Filter System and 8L Safe Storage Bag
LifeStraw® Peak Series
Gravity Water Filter System
with Safe Water Storage
8L + 8L
PEAK SERIES
HOW TO USE
1. Fill dirty water bag. When ready to use, unscrew
the neck cap to expose the gravity bag opening. Fill
with water and retighten the cap to close. Note. There
is no need to remove the pre-filter basket prior to
filling up the gravity bag.
2. Assemble. “Attach the membrane microfilter to the
gravity bag by first unscrewing the plug cap. Then,
screw the membrane microfilter onto the outside of
the neck cap, tightening until secure. To use the
gravity bag + safe water storage system together,
simply connect the exposed end of the hose to the
membrane microfilter, and secure the end of the hose
with the quick connector into the outlet located on the
safe water storage bag. Keep the pinch clip engaged
throughout assembly, until ready for water for flow.
3. Set. Hang the dirty water bag and the safe water
bag from two separate anchor points. The dirty water
bag needs to be hung at a higher height than the safe
water storage bag, for gravity to do its work. Note: the
higher you are able to hang the dirty water bag
(resulting in the hose as vertically straight as possible)
the more optimal flow rate you will achieve. Also be
sure to secure your safe water storage bag from a
separate, lower anchor point, and never hang the
weight of the safe water bag from the hose connections
only. Tip – You can use the included strap and
carabiner to hang the safe water bag from the dirty
water bag as well, for an extra level of support
between the two bags.
4. Ready to use. Release the pinch clip on the hose to
allow filtered water to flow through, letting gravity do
the work!
5. Close filter. When finished, tighen the pinch clip on
the hose to restrict water flow. This allows the hose to
be removed from both connection points. Replace the
plug cap on the membrane filter when a hose is not in
use. Note: we recommend removing the gravity
system from hanging position to allow for raising the
filter above the reservoir, preventing water from
filtering out while the system is being secured.
Backwash. Regularly backwash your filter after
drinking to keep the filter clean and to prevent
clogging. To do this, disconnect the membrane
microfilter from the top cap by twisting counterclockwise.
Then, screw the included backwash syringe onto
the membrane microfilter. Plunge the open end of the
filter into drinking water, and draw water up through
the filter by pulling the syringe upward and away from
the filter until it reaches the edge of the housing. Then
push water back through the filter by pressing the
syringe downward toward the filter until the water has
been fully pushed through the other side.
If storing your LifeStraw Peak Series 8L Gravity Water
Filter System for greater than 1 month without use, we
recommend following our long term storage instructions
to preserve the longevity of the filter and to
prevent clogging. For long term storage instructions,
visit www.lifestraw.com/howitworks
LONG-TERM STORAGE INSTRUCTIONS
Avoid drying out the filter by storing with a saline
solution made by mixing a teaspoon of salt with water.
This will keep the filter at its highest performance and
maintain the hydrophilic properties of the membrane,
while also preventing any mold or algae from growing
during long-term storage. When the membrane
becomes completely dried out, it can be difficult to get
water to flow through again.
Follow these steps if you have already used the
LifeStraw Peak Series filter and you plan to store for
greater than 1 month without use. If storing for longer
than 3 months, we recommend cleaning with a diluted
bleach solution prior to storage for increased
disinfection. These instructions can be found at
www.lifestraw.com.
Immerse in Salt Solution. Using a reusable container,
dissolve 1 teaspoon of salt with 2 cups of water. Place
the filter into the saline solution and use the backwash
syringe to pull water fully into the filter. Place the filter
into the reusable container, still filled with salt water,
and seal tightly. Once the filter is removed from the
system, the bag can be cleaned with household soap
and water before setting out to dry.
Store. Store container with the salt water in a cool dry
place. If storing the gravity bag and/or safe water
storage bag, make sure the caps are open before
storage. If applicable, store your Peak Series Carbon
Filter Attachment System in a separate sealed
container and keep in a cool, dry place.
Resume Use. To use your Peak Series filter again,
discard the salt solution and fill a cup or container with
regular source water. Use the backwash syringe to
remove residual salt water from the filter by pulling in
the new water and pushing back through the filter.
If you have additional questions about storage and
maintenance for your LifeStraw Peak Series products,
please email us at [email protected]
TIPS
Having trouble making sure the filter is secure? Fun
fact! The handle of the plug cap can be used as a tool.
Simply fit the loop-end around the filter, using it to
screw the filter in the rest of the way.
Need some help re-inserting the pre-filter basket? We
find it easiest to pinch the bag around the neck area
while screwing in the basket. Push the cap toward the
back of the bag and twist it using the finger tab, until
it locks into place. You can give the pre-filter basket a
gentle push forward and backward to ensure it’s
locked into place.
Insertion is easiest when there is space between the
back of the bag and the front cap, so we recommend
holding the bag vertically when possible. Please avoid
trying to re-insert the pre-filter basket while the
gravity bag is lying flat, as this will be more difficult.
Test your gear before you go! Follow the how to use
instructions instructions to make sure your LifeStraw
Peak Series 8L Gravity Water Filter System is
operating as you expect it to.
Slow flow rate? Use the backwash instructions to
remove potential air bubbles in the membrane.
Questions? Contact [email protected] – we’re here
to help!
DISCLAIMER
Vestergaard Frandsen Inc. and its affiliated entities and
related companies shall be neither liable for any damages
arising out of or as a result of the use of LifeStraw Peak
Series 8L Gravity Water Filter System for any purpose
other than for which it is clearly intended, nor for any
malfunction resulting from the failure of the user of
LifeStraw Peak Series 8L Gravity Water Filter System to
strictly abide by the usage and safety information
contained in this manual. Stated microbiological and
longevity performance of LifeStraw Peak Series 8L Gravity
Water Filter System is conducted under standard
laboratory test conditions; more information regarding
test results and conditions can be found at
www.lifestraw.com.
The effectiveness of LifeStraw Peak Series 8L Gravity
Water Filter System may be limited by environmental or
hygienic conditions that could contribute to the
recontamination of water after it has passed though the
product’s internal filter. These conditions include but are
not limited to:
1. Handling the mouthpiece with dirty / contaminated
hands.
2. Failure to maintain a clean moutpiece and exterior.
3. Failure to discontinue use of the producrt per
manufacturer’s recommendations.
4. Using the filter if the plastic is cracked.
5. Use in or exposure to extreme heat (higher temperature
than 140°F/60°C) or freezing temperatures (below 32°
F/0°C).
Read these usage and safety instructions carefully before
using LifeStraw Peak Series 8L Gravity Water Filter
System. LifeStraw Peak Series 8L Gravity Water Filter
System is a personal water filtration tool and should only
be used for filtering water. The quality of the filtered
water is not guaranteed if the product is submitted to
conditions other than those encountered during its
normal use. Your use of LifeStraw Peak Series 8L Gravity
Water Filter System implies that you accept and agree to
these terms, conditions, and disclaimer.
CAUTION
Drinking untreated water may expose you to harmful
microorganisms and increase your risk of gastrointestinal
illness. Improper usage of LifeStraw Peak Series 8L Gravity
Water Filter System increases your risk of exposure to harmful
microorganisms and increases your risk of gastrointestinal
illness. Reduce your risk of becoming sick by following these
safety instructions and by educating yourself on backcountry
water safety. Never use LifeStraw Peak Series 8L Gravity Water
Filter System to filter seawater or chemically contaminated
water, including water from mining tailing ponds or from near
large agricultural operations. Rinse the bottle and top cap with
safe water before first use.
DO NOT DROP or place pressure on this product in any
manner. The intentional or unintentional impact of this
product on a solid surface may damage the filtration
mechanism within the LifeStraw Peak Series 8L Gravity Water
Filter System and render it inefficient and unusable. This
product must not be used by children without the supervision
of an adult.
References
- Water Filters & Water Purifiers | LifeStraw – LifeStraw Water Filters & Purifiers
- Our Technology – LifeStraw Water Filters & Purifiers