SKMEI 1362 Women’s LED Digital Bracelet Watch User Manual

SKMEI 1362 Women’s LED Digital Bracelet Watch

 Features

•  13 Digits LCD Display, Display Hour, Minute, Second, Month, Day, and Week
•  Daily Alarm and Chime hourly
•  Snooze functions
•  Dual Time
•  Timer, Max Time length: 23:59:59;
•  12 / 24H format selectable, Auto Calendar
•  1/100 seconds Chronograph with split function
•  Timer
•  EL backlight

Operational Manual

1. At Non-setting mode, press B to choose operation mode. At any mode, press A EL illuminates for 1.5s. At real time model ,press D to switch between 12 or 24 hours

2.  Normal Time Mode

   • Normal Time setting
   •  Press and hold C key for 2s to time setting state and “Second” flashing, press D key to zero, press B key to select item as following sequence :
   • Press D key to adjust the flashing item.
   • Press C key to return to normal time mode.
   •  Press D key while the seconds are in the range of 30 to 59 resets them to 00 and add 1 to the minutes .In the range of 00 to 59 resets them to 00 and adds to the minutes. In the range of 00 to 29,the minutes are unchanged.
   • 12/24-Hour format :In normal time mode, use D to switch between 12-hour (12H) and 24-hour (24H) time mode.

3. Alarm Mode

   • Daily alarm and snooze alarm ( ) off /on: At alarm mode, press C key to turn on/off alarm, will display ( ) or snooze( ) ,when alarm is ringing, ( ) will flash once it reaches setting time, and will stop automatically after 10 s , when alarm is ring , press any key to stop.
   •  Daily alarm and daytime alarms settings: At alarm mode, press C key 2s into alarm time setting mode, press D key to adjust flashing character “plus” operation, press B key to select items, press C key to confirm setting. If set date in alarm setting mode, the alarm is for that date, without date is daily alarm.
   •  Hourly chime off /on: At alarm mode, press D key, and “Hour” disappeared ,then press C key to turn on/off ( ) hourly chime.
   •  Snooze mode： When snooze mode is on, alarm will ring every 5 minutes, without any operation, will Last 10s.

4.  Chronograph Mode

   •  Press D key to start/stop running, when stop, press C key to zero.
   •  Midway time: At chronograph mode, press D key to start, press C key to measure midway time, the display changes from “ST” to “SPL”, press C again to release the midway time. In this state, press D key to stop. In stop state, press C key to zero.
   •  Two player time: At chronograph mode, press D key to start. In this state, press C key to display the time of first player, press D key again to stop second player’s test. At this time, press C key to view the time for the second player, and then press C key to zero.

5.  Dual Time Mode

   • Dual Time setting
     In dual time mode , press and hold C key for 2s to select ” Hour ” setting, press B key to select ” Minute ” setting, press B key to adjust the flashing item, press C key again to finish setting ,and return to dual time displaying mode . Can’t set seconds of dual time mode, it is Synchronize to Normal time Mode.

6. Timer Mode

•  Timer time setting : Press and hold C key for 2s to time setting mode and “Hour” is flashing, press B key to select “Hour” or “Minute” setting ,press D key to adjust the flashing item, press C key to complete setting.
•  Timer operation: Press D key to start/stop counting, press C key to starting value when stop counting.

Note: when watch in setting mode of each function , the character in adjustment is in flashing.

Specification

• Operational Temperature Range ：-0℃~+50℃
• Operational Voltage ：3.0V
• Accuracy ：±60sec/month
• Battery Code ：CR2032
• Static Maximum Current ：≤3.5 u A（T=25℃）
• Static Average Current ：≤2.5 u A（T=25℃）
• Alarm Average Current ：≤2.5 m A
• EL lighten Average Current ：≤10 m A
• Battery Life (85%) ：24 month (Japan Battery)

（Battery life calculate according to EL lighten 3 time each day for 1.5s each time , alarm for 20s each day）

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>