ENERMAX ETS-T50 140mm CPU Air Cooler User Manual
- June 5, 2024
- ENERMAX
Table of Contents
User’s Manual
ETS – TSO
ARGS VERSION
Chapter 1 Part List
Chapter 2 Installation
Step 1.1
＊LGA1200/115X/1366
- ensure the positioning screw aligns with the backplate.
- please ensure a proper connection to the motherboard.
Insert the position screws into the proper holes on the backplate. Then use
the washers to fix the position screws.
If your CPU platform is Intel LGA1700, please skip stepping 1.2
If your CPU platform is Intel LGA2011/2011-3/2066, please skip stepping 2
Step 1.2
- ensure the positioning screw aligns with the backplate.
- Please ensure a proper connection to the motherboard.
Insert the LGA1700 position screws into the proper holes on the backplate. Then use the washers to fix the position screws.
Step 1.3
＊Intel LGA1700/1200/115X/1366
Install the Intel backplate onto the back of the motherboard; fix the backplate with the stand-off.
Step 1.4
＊Intel LGA1700/1200/115X/1366
Install the mounting plates on the position screws and fasten the nuts.
Step 2
＊Intel LGA 2011/ 2066 installation
Fasten the Intel LGA 2011/2066 screws to the motherboard. Install the mounting plates on the position screws and fasten the nuts.
Step 3.1
＊AMD installation
Remove the original screws and place the backplate back into position.
Step 3.2
＊AMD installation
Step 3.3
＊AMD installation
Fix the AMD mounting plate by using the four nuts.
Step 4
Remove the fan and the air guide before installing the cooler.
Step 5
Apply the thermal grease evenly onto the CPU surface with a spreader. Remove the protective film from the cooler base.
Step 6
Place the cooler on the CPU and tighten the spring screws on the base.
Step 7
Attach the fan and the air guide to the cooler. Connect the fan 4-pin header
to the CPU fan power socket on the motherboard.
Install the fan and air guide as illustrated way gives the best cooling
airflow.
Chapter 3 Supplement –Air Guide
Rotate the grill of the air guide for preferred airflow direction adjustment.
Chapter 4 Motherboard Sync
- Please ensure a proper connection to the motherboard.
Connect the sync cable to a supported motherboard with an ARGB header.