ENERMAX ETS-F40-BK 140mm CPU Air Cooler User Manual
- June 5, 2024
- ENERMAX
Table of Contents
- ETS-F40-FS – Part List
- ETS-F40-BK(W)-ARGB – Part List
- ETS-F40-BK – Part List
- Chapter 1.1 * Intel LGA1200/115X/1366 Pre-installation
- Chapter 1.2 * Intel LGA1700 Pre-installation
- Chapter 2 * Intel (LGA201x/2066) Installation
- Chapter 3 * AMD Installation – AMD stock backplate
- Chapter 4 * Applying the thermal grease
- Chapter 5 * Fastening the heatsink to the CPU
- Chapter 6 * Attaching the fan to the cooler and connecting the 4 pin
- For ETS-F40-BK-ARGB / ETS-F40-W-ARGB only
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
ETS-F40-BK 140mm CPU Air Cooler
User Manual
ETS-F40-FS – Part List
ETS-F40-BK(W)-ARGB – Part List
ETS-F40-BK – Part List
Chapter 1.1 * Intel LGA1200/115X/1366 Pre-installation
Required mounting parts :
Step 1.1
- ensure the positioning screw aligns to the backplate
- Please ensure a proper connection to the motherboard.
Insert the position screws into the proper holes on the backplate. Then use
the washers to fix the position screws.
《If your CPU platform is Intel LGA1700, please skip stepping 1.2 》
《If your CPU platform is Intel LGA2011/2011-3/2066, please skip stepping 2 》
Chapter 1.2 * Intel LGA1700 Pre-installation
Required mounting parts :
Step 1.2
- ensure the positioning screw aligns with the backplate
- please ensure a proper connection to the motherboard.
Insert the LGA1700 position screws into the proper holes on the backplate. Then use the washers to fix the position screws.
Step 1.3
Install the Intel backplate onto the back of the motherboard; fix the back plate with the stand-off.
Step 1.4
* LGA1700/1200/115X/1366
Install the Intel mounting plates and fasten the nuts to fix the backplate.
Chapter 2 * Intel (LGA201x/2066) Installation
Required mounting parts :
Step 2
Fasten the Intel LGA 2011 / 2066 screws to the motherboard. Install the mounting plates on the position screws and fasten the nuts.
Chapter 3 * AMD Installation – AMD stock backplate
Required mounting parts :
Step 3.1
* AMD installation
Step 3.2
* AMD installation
Tighten the AMD screw to the AMD stock backplate(included with the motherboard).
Step 3.3
* AMD installation
Fix the AMD mounting plate by using the four nuts.
Chapter 4 * Applying the thermal grease
Step 4
Apply the thermal grease evenly onto the CPU surface with a spreader. Remove the protective film from the cooler base.
Chapter 5 * Fastening the heatsink to the CPU
Step 5
Chapter 6 * Attaching the fan to the cooler and connecting the 4 pin
header to the CPU fan power socket
Attaching the fan to the cooler and connecting the 4-pin header to the CPU fan power socket.
For ETS-F40-BK-ARGB / ETS-F40-W-ARGB only
Connect the top cover 3pin ARGB connector to the fan ARGB hub as an illustrated way. Then, connect the sync cable to a supported motherboard with a 3pin (5VDG) ARGB header.
Motherboard Sync
Connect the sync cable to a supported motherboard with an ARGB header.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>