ENERMAX ETS-T40Fit CPU Cooler User Manual

June 5, 2024
ENERMAX

ENERMAX ETS-T40Fit CPU Cooler

Part List

ENERMAX-ETS-T40Fit-CPU-Cooler-1

Installation

STEP 1

  1. Insert position the position screws. ( screws If you into the CPU proper platform holes is Intel on the backplate. Then please use skip the to washers to fix the position screws. If your CPU platform is Intel LGA2011/2066, please skip to steps 1-BENERMAX-ETS-T40Fit-CPU-Cooler-2
  2. Install the back plate on to the back of the motherboard. Put the stand-offs into the back plate EN screws.ENERMAX-ETS-T40Fit-CPU-Cooler-3
  3. EN Fasten the Intel LGA 2011/2066 screws to the motherboard.ENERMAX-ETS-T40Fit-CPU-Cooler-4

STEP 2

The image size is too small for OCR Engine 2. Please use Engine 1.

ENERMAX-ETS-T40Fit-CPU-Cooler-5ENERMAX-ETS-
T40Fit-CPU-Cooler-6

STEP 3

Insert the LGA1700 position screws into the proper holes on the back plate. EN Then use the washers to fix the position screws.ENERMAX-ETS-T40Fit-CPU-
Cooler-7

STEP 4

Install the Intel mounting plates with the arrow marks towards to the CPU, then fasten them with EN spring screws.ENERMAX-ETS-T40Fit-CPU-
Cooler-8

STEP 5ENERMAX-ETS-T40Fit-CPU-Cooler-9

  1. Insert the position screws into the proper holes on the back plate. Then use the washers to fix EN the position screws.
  2. ENERMAX-ETS-T40Fit-CPU-Cooler-10Stick the insulating pad on the appropriate position.
  3. Instal the back plate on to the back of the motherboard. Put the stand-offs into the back plate screws.ENERMAX-ETS-T40Fit-CPU-Cooler-11
  4. Combine the AMD mounting plates on the Intel mounting plates (arrow marks on the Intel plates facing towards the CPU) with the mounting plate screws. Then install the combined plate on the motherhnard with Corina screws.ENERMAX-ETS-T40Fit-CPU-Cooler-12

STEP 6

ENERMAX-ETS-T40Fit-CPU-Cooler-13 Remove the fan with the fan brackets before installing the cooler.

STEP 7

Apply the thermal grease evenly onto the CPU surface. Remove the protective film from EN the cooler base.ENERMAX-ETS-T40Fit-CPU-
Cooler-14

STEP 8

Secure the cooler using the pressure mounting plate and fasten the screws into the Intel AMD mounting plate.ENERMAX-ETS-T40Fit-CPU-
Cooler-15

STEP 9ENERMAX-ETS-T40Fit-CPU-Cooler-16

Attach the fan to the cooler with fan brackets. Connect the PWM 4 pin to the CPU Fan header on the motherboard. Install the fan as illustrated wav gives best cooling airfílow

Supplement

ENERMAX-ETS-T40Fit-CPU-Cooler-17

Attach the fan brackets by fastening the bracket screws, then stick the vibration-absorbing pads to the fan.

ENERMAX-ETS-T40Fit-CPU-Cooler-18Use speed reduction adaptor to reduce the fan speed to 400-900 RPM and provide quieter operation.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals