YiOBYiOR 300Mbps U8 Wireless WiFi Repeater Range Extender Router Installation Guide

YiOBYiOR 300Mbps U8 Wireless WiFi Repeater Range Extender Router

Panel Layout

WiFi Repeater mode

In this mode, the router boosts the existing wireless coverage in your home.

1. ConnectYourRouter
   Plug the extender Into 1n electrical outlet near your host router, and LEDisonand then off.

2. Configure repeater mode
   Using WPS (Wi-Fi Protected Setup) Method ONE Using WPS (Wi-Fi Protected Setup) Using WPS is an easier way to extend your host network. You are recommended to
   use this method if your host router has the WPS button.

Connect

1. Press the WPS button on your router
2. Within 2 minutes, press the WPS button on the extender for 1 second.

Method TWO Using a Web Browser
For Mobile phone users
Connect to the U8 router

1. Find the SSID(Network Name)
2. printed on the label of the U8 router.
3. Login Launch a web browser and type in the address field. ( If the phone is connected to the repeater for the first time, The phone will automatically pop up the login page
4. Use admin (all lowercase) for the Password to log in.

Relocate

1. Plug the extender into an electrical outlet between your router (Host Network) and the Wi-Fi “dead” zone.
2. The location you choose must be within the range of your existing host network.
3.  Wait until the LED is lit and solid Green. If not, relocate it closer to the router to achieve a good (or better) signal quality.

Mode Selection

Relocate

1. Plug the extender into an electrical outlet between your router (Host Network) and the Wi-Fi “dead” zone. The location you choose must be within the range of your existing host network.
2.  Wait until the LED is lit and solid Green. If not, relocate it closer to the router to achieve a good (or better) signal quality.

Frequently Asked Quaatlons(FAQ)

Q1. What can I do If the login window does not appear?

• If the computer Is set to a static or fixed IP address, change the setting to obtain an IP address automatically.
• Verify If http://1Q2.168.11.1 Is correctly entered In the web browser.
•  Make sure your computer Is connected to the Mini Router’s network.
•  Use another web browser and try again.
• Reboot your router and try again.
•  Disable the network adapter used currently and then enable it again.

Q2. What can I do if I can’t access the Internet?

• Check if the internet is working properly by connecting a computer directly ta the modem via an Ethernet cable. If not, connect to your internet provider.
•  Reboot your router and try again.

Q3. How do I restore the router to its factory default setting?

• While the router is powered on, press and hold the reset button on the rear panel of the router for approximately5seconds.

Q-4. Why set the repeater mode is unsuccessful?

•  You may have typed in the router’s wireless password incorrectly, please log in and check the wireless password.
•  The Mini router may be out of range, please move it closer to the router.
• Please reset the Mini Router and go through the configuration again.
•  A.lfyau need to reset the extender. You need to press and hold the reset button Inside the tiny hole for 10 seconds.

AP mode
In this mode, the router transforms your existing wired network into wireless.

1. Connect Your Router
2. Connect to the U8 router
   For Mobile phone users ConnecFind the SSID(Network your Mobile phone Name) to the printed U8 routers on the label network of the U8 router.

Login

1. Launch a web browser and type http://192.168.11.1 in the address field. (If the phone is connected to the repeater for the first time, The phone
   will automatically pop up the login page

2.  Use admin (all lowercase) for the Password to log in.

Mode selection

Router Mode

Connect Your Router

1. If your Internet connection is through a DSLICable modem, follow steps 1,2, and 4 to complete the hardware connections.
2. If your Internet connection is through an Ethernet cable form the wall, follow steps 3 and 4 to complete the hardware connections.

Connect to the U8 router
For Mobile phone users

1. Find the SSID(Network Name) printed on the label of the U8 router.

2. Connect your Mobile chance to the IR router’s network

3. Launch a web browser and type http:/l/192.168.11.1 in the address field. (If the phone is connected to the repeater for the first time

4. The phone will automatically pop up on the login page)Use admin (all lowercase) for the Password to log in.

Mode Selection

Set up Your Internet Connection You can modify the settings according to the service information provided by your ISP.

you choose Dynamic IP, Dynamic IP users are usually equipped with a cable TV or fiber cable.

If you choose Static IP, enter the information provided by your ISP in the corresponding fields.

you choose PPPoE,enter the username and password provided by your ISP.PPPoE users usually have DSL cable modems. Extender WIFI Settings

FCC STATEMENT

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: this device may not cause harmtul interference, and (2) this device must accept any interference received, including interference that may cause undesired operation
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential dance with the instructions. may cause harmful interference to radio communications. However. there is no guarantee that interference will not occur in a particular installation. if this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment or and on, the user is encouraged to try to correct the interference by one or more of the following measures

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Consult the dealer or an experienced that which whom the receiver is connected.
  Warning: changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment

Radiation Exposure Statement
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance 2Ucm between the radiator and your body.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>