ENERMAX ERT1650EWT 1650W Full Modular 80 Plus Gold User Manual

ENERMAX ERT1650EWT 1650W Full Modular 80 Plus Gold

Follow ENERMAX on social media for the latest information and show us your build with hashtag #ENERMAX

• Facebook: https://www.facebook.com/Officia1ENERMAX
• Instagram: https://www.instagram.com/OfficialENERMAX
• Twitter: https://twitter.com/OfficialENERMAX
• YouTube: https://www.youtube.com/@OfficialENERMAX.

Product Notice

Only a technician, authorised by FNFRMAX, is allowed to perform maintenance service! Warranty is subject to void under unauthorized attempt to open the power case or modification ot any kind, even attempted only, ot the power supply or its components!

ENERMAX will not be rl! responsible for damage caused by the following situations:

• Opening of the PSU case and/or modification of any component or cable without FNFRMAX written authorization.
• Ignoring the connector’s wrong insertion prevention design by attaching a connector to a device in the wrong orientation.
• Connecting Loo many devices to one cable by using an additional adaptor (Y cables).
• The serial number label or warranty seal is defaced, modified, or removed.
• Damage is caused by natural phenomena or uncontrollable forces, such as lightning, flooding, fire earthquake, etc.

1. The main plug is used as the disconnect device, the disconnect device shall remain ready for operation.
2. The apparatus shall be connected to a MAINS socket outlet with a protective earthing connection.

This ENERMAX Technology Corporation product is warranted to be free from defects in material and workmanship for five (5) years from the date of purchase. The warranty length may be different in diverse regions based on local policy. ENERMAX Technology Corporation agrees to repair or replace the product, at its option and no charge, if, during the warranty period, it is returned to the nearest FNFRMAX Technology Corporation subsidiary/agent with all shipping charges prepaid and bearing a return merchandise authorization (RMA) number, and if the inspection reveals that the product is defective. Charges for removing or installing the product are excluded under the terms of this warranty agreement. This warranty shall not apply to any product, which has been subject to connection to a faulty power source, alteration, negligence, or accident, or to any product, which has been installed other than by these instructions. In no event shall ENERMAX Technology Corporation, its subsidiaries, or agents be liable for damages for a breach of warranty in an amount exceeding the purchase price of this product!

We would like to thank you for your support. Please visit our website at:

Global:

• Website: http://www.enermax.com/en
• E-mail: enermax@enermax.com.tw

Taoyuan:

• Website: http://www.enermax.com
• E-mail: support-tw@enermax.com.tw

Germany:

• Website: http://www.cncrmax.de
• E-mail: support@enermax.de

Korea:

• Website: http://enermaxkorea.com
• E-mail: enermax@cynex.co.kr
• TEL: (02)719-2580, 080-719-2581
• FAX: (02) 6713-2654

If you have any questions or problems with our products, please contact our support team at www.enerrnax.com/support.

Component List

Product Introduction

The actual product depends on different regions or countries.

1. RGB Control Button
   • Press the RGB button to select the 14 RGB lighting modes.
   • Press and hold the RGB button for 3 seconds to switch M/B sync and the RGB button control.
2. 1/0 Switch
   Individual PSU ON/OFF switch (I=ON, O=OFF)

Test Your PSU Before You Connect to the PC System

1. Take the AC cord and the motherboard cable.
2. Insert the 18-pin and 10-pin connectors to the PSU.
3. Plug in the 24-pin connectors to the tester.
4. Plug in the AC cord and set the 1/0 switch to “1” to turn on the PSU.
5. PSU fan will spin clockwise at the beginning to clean itself and then turn counterclockwise for several seconds, and stop to activate the semi-fanless function.

Installation-Cable

Motherboard 24 pin
Connect the 24-pin motherboard power.

CPU 4+4 pin
Connect the 4+4 pin CPU power.

*12VHPWR 12+4 pin/2 PCle 8 pin – 12VHPWR**
Connect the 12+4 pin connector to your GPU as required.

PCle 6+2 pin
Connect the PCle connectors to your GPU as required.

SATA
Connect the SATA as needed.

4P Molex
Connect the 4P molex to your fans as required.

RGB Sync
Connect the 3-pin RGB to the ARGB port on the motherboard.

Please ensure a proper connection to the motherboard.

Warning
Please only use the modular cables provided in your ENERMAX power supply package. Do NOT use other cables to prevent pin configuration damage to your system and your power supply.

How to Install 12VHPWR Properly

Please avoid vertically or horizontally cable bending too close to the connectors. We suggest a minimum distance of 35mm from the connectors before bending.

How to Connect Cable to GPU Properly

Check the power consumption from the official GPU website before installation, and also please see the PCle slots installation instructions below.

High-powered GPU are usually outfitted with two or three PCle power connector slots. ENERMAX prefers the use of two or three separate PCle cables to connect these cards to your PSU.

Installation-PSU

Step 1

Step 2

Specification

Protection

FAQs

Can't find out the 4-pin CPU cable.

We provide two 4+4 pin CPU cables, which can be used in split mode.

How to connect 8 8-pin PCle with a 6+2-pin PCle cable?

Combine the 6-pin and 2-pin before connecting it to the GPU.

How to connect the motherboard cable?

Plug in the 18-pin and 10-pin connectors to the PSU, and insert the 24-pin connector to the motherboard.

Can't power up the PSU successfully.

Check if the motherboard and CPU cables are connected to the motherboard exactly, or the PSU will not work.

After installing a new GPU, the PC system crashes frequently.

It means the PSU is inadequate for your GPU, before purchasing the PSU, please refer to our PSU calculator tool on the ENERMAX website.

The fan won't spin after the PSU is powered on for several seconds.

PSU fan will spin clockwise at the beginning to clean itself and then turn counterclockwise for several seconds, and stop to activate the semi-fanless function.

Contact Information

• © 2023, ENERMAX Technology Corporation, 2F-1, No. 888, Jing-Guo Road, Taoyuan City (330)
• Tel. +886-3-316-1675
• Fax. +886-3-346-6640

All rights reserved. Actual products and accessories may differ from Illustrations. Information in this manual is subject to change without prior notice. Printing errors and omissions excepted. All trademarks, registered trademarks and/or product names mentioned are the property of their respective owners.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>