ENERMAX LIQMAXFLD SR Liquid Cooler Instruction Manual

June 13, 2024
ENERMAX

ENERMAX LIQMAXFLD SR Liquid Cooler

ENERMAX-LIQMAX-FD-SR-Liquid-Cooler-product

Product Information

The Liquid Cooler is a cooling system designed to regulate the temperature of a CPU. It comes in three models: ELC-LMF120-SF, ELC-LMF240-SF, and ELC- LMF360-SF. The cooler features a radiator made of aluminum and measures 154 x 120 x 27mm, 276 x 120 x 27mm, or 395 x 120 x 27mm depending on the model. It has a tube length of 400mm and a copper cold plate for efficient heat transfer. The water block pump has a rated voltage of 12V and a rated current of 0.43A. The fan operates at speeds ranging from 500 to 3000 RPM and has a dimension of 120 x 120 x 26.8mm. It is equipped with RGB LED lighting for added aesthetics. The Liquid Cooler is compatible with different CPU sockets, including Intel LGA1200/115x/1366, LGA1700, LGA2011/2011-3/2066, and AMD sockets. It has a maximum TDP (Thermal Design Power) of 300W for the ELC- LMF120-SF model, 350W for the ELC-LMF240-SF model, and 370W for the ELC- LMF360-SF model.

Product Usage Instructions

  1. Determine the appropriate mounting hardware according to your CPU socket type.
  2. Attach the Intel or AMD clip to the cooler depending on your CPU brand.
  3. Place the washer on each stand-off and insert them into the appropriate holes on the motherboard.
  4. Apply thermal grease onto the CPU.
  5. Carefully align the cooler with the stand-offs and lower it onto the CPU, ensuring that the mounting holes line up.
  6. Secure the cooler in place by tightening the screws.
  7. Connect the fan(s) to the appropriate fan headers on the motherboard using the provided fan screws.
  8. Connect the pump to a 4-pin PWM connector on the motherboard.
  9. Connect the RGB LED cable to the appropriate RGB header on the motherboard (if applicable).
  10. Finally, connect the SATA adapter to a SATA power connector and any 4-pin devices (if applicable).

Maintenance

To ensure optimal performance and longevity of the Liquid Cooler, regular maintenance is recommended:

  • Clean the radiator and fans regularly to remove dust and debris.
  • Check for any leaks or signs of damage and address them immediately.
  • Monitor the temperatures and fan speeds using software or BIOS settings.
  • If necessary, reapply thermal grease after removing and cleaning the cooler.

For more detailed instructions and information, please refer to the user manual provided with the product or visit the manufacturer’s website.

Specification

Model ELC-LMF120-SF ELC-LMF240-SF ELC-LMF360-SF
CPU Socket Intel® LGA 1700/1200/115x/2066/2011/2011-3(Square ILM)/1366 AMD®

AM5/AM4
Radiator Dimension| 154 x 120 x 27mm| 276 x 120 x 27mm| 395 x 120 x 27mm
Tube Length| 400 mm
Material| Cold Plate| Copper
Radiator| Aluminum
Tube| Rubber
Water

Block

| Pump| Speed| 1200~3000 RPM
Bearing| Ceramic bearing
MTBF| 50,000 hr
Rated Voltage| 12V
Rated Current| 0.43 A
VRM

Fan

| Speed| 500~3000 RPM
Rated Current- RGB LED| 0.24 A
Fan| Dimension| 120 x 120 x 26.8 mm
MTTF| 60,000 hr
Speed| 500~1800 RPM
Rated Voltage| 12V
Rated Current| 0.08A
Air Flow| 58.03 CFM (Maximum)
Static Pressure| 2.4 mmH2O (Maximum)
Noise Level| 23.46 dBA (Maximum)
Connector| 4 Pin PWM
Thermal Grease| Dow Corning® TC-5888
TDP| 300W| 350W| 370W

Part List for Intel

The components included with the part package depend on different areas and versions, please visit our website to check the newest information.ENERMAX-
LIQMAX-FD-SR-Liquid-Cooler-fig-1 \(1\)

Part List for AMD

The components included with the part package depend on different areas and versions, please visit our website to check the newest information.ENERMAX-
LIQMAX-FD-SR-Liquid-Cooler-fig-1 \(2\)

Installation

Installation Step 1ENERMAX-LIQMAX-FD-SR-Liquid-Cooler-fig-1
\(3\)

  • Install the bracket to the pump by sliding the bracket into the slot un-secure.

Installation Step 2 ENERMAX-LIQMAX-FD-SR-Liquid-Cooler-fig-1
\(4\)

  • Insert the posi-on screws into the proper cutout on the backplate. Then insert washers onto the post on screws.

Intel: Step 2-2ENERMAX-LIQMAX-FD-SR-Liquid-Cooler-fig-1
\(5\)

  • Install the Intel backplate onto the back of the motherboard. Then insert stand-off onto the positions screws.

Intel: Step 2-2ENERMAX-LIQMAX-FD-SR-Liquid-Cooler-fig-1
\(6\)

  • Tighten the Intel LGA2011/2011-3/2066 screw to the motherboard.

ENERMAX-LIQMAX-FD-SR-Liquid-Cooler-fig-1 \(7\)

  • Remove the original AMD retention brackets and screws.ENERMAX-LIQMAX-FD-SR-Liquid-Cooler-fig-1 \(8\)
  • Tighten the AMD screw to the AMD stock backplate (included with the motherboard).

Installation Step 3ENERMAX-LIQMAX-FD-SR-Liquid-Cooler-fig-1
\(9\)

  • Remove the protective cover from the cold-plate.

Installation Step 4ENERMAX-LIQMAX-FD-SR-Liquid-Cooler-fig-1
\(10\)

  • Align the pump and bracket over the stand-off screws then tighten the spring screws until all four corners are firmly secured.

Installation Step 5ENERMAX-LIQMAX-FD-SR-Liquid-Cooler-fig-1
\(11\)

  • Attach the fan and radiator to the chassis.

Installation Step 6

Please connect the 4-pin Y cable connector to the necessary header in order to boot up the motherboard successfully. Please read the motherboard manual for more details.ENERMAX-LIQMAX-FD-SR-Liquid-Cooler-fig-1
\(12\)

  • Connect both the fans and pump to the CPU_FAN or CPU_OPT 4-pin header using the PWM Y-splitter cable. Connect the ARGB cable to a support motherboard with an ARGB header.

Change the Logo Orientation

  • Remove the pump cover, rotate, and re-install to your preferred orientation.

CONTACT

Global (Spain, Italy, Russia, Poland, Thailand, Persia) :

Limited Warranty

Please read this limited warranty carefully. Warranty is subject to void under the following criteria:

  1. The serial number label or warranty seal is defaced, modified, or removed.
  2. Taking apart the product and/or modification of any component or cable without ENERMAX’s written authorization.
  3. Ignoring the connector’s faulty-insertion-prevention design by attaching a connector to a device under incorrect orientation.
  4. Damage is caused by natural phenomena or uncontrollable forces, such as lightning, flooding, fire, earthquake, misuse, abuse, negligence, accident, wear and tear, mishandling, and misapplication.
  5. ENERMAX is only liable for limited warranty service of ENERMAX products. ENERMAX is not liable for other damage or loss of time, interest, or commercial opportunity due to using a defective product of ENERMAX.

This ENERMAX Technology Corporation product is warranted to be free from defects in material and workmanship within three (3) years for all the models from the date of purchase. The warranty length may be different in diverse regions based on local policy. ENERMAX Technology Corporation agrees to repair or replace the product, at its option and at no charge, if, during the warranty period, it is returned to the nearest ENERMAX Technology Corporation subsidiary/agent with all shipping charges prepaid and if the inspection reveals that the product is defective. Please present the proof of purchase for requesting RMA. Charges for removing or installing the product are excluded under the terms of this warranty agreement. This warranty shall not apply to any product, which has been subject to connection to a faulty power source, alteration, negligence, or accident, or to any product, which has been installed other than by these instructions. In no event shall ENERMAX Technology Corporation, its subsidiaries, or agents be liable for damages for a breach of warranty in an amount exceeding the purchase price of this product.
https://www.enermax.com/policy/warranty.

Warranty & Support Information for Australia

  • Our goods come with guarantees that cannot be excluded under the Australian Consumer Law.
  • You are entitled to a replacement or refund for a major failure and for compensation for any other reasonably foreseeable loss or damage.
  • You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure.
  • Please read the above limited warranty.
  • This warranty is valid only for the ENERMAX products distributed by authorized dealers) in Australia.
  • Please contact ENERMAX for warranty and support information.
  • ENERMAX Technology Corporation
  • 2F-1, No. 888, Jing-Guo Road, Taoyuan City (330)
  • Tel. +886-3-316-1675
  • Website: http://www.enermax.com.
  • E-mail: enermax@enermax.com.tw.

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals