ENERMAX ELC-AQFA360-SQA Addressable RGB AIO Cooler User Manual
- June 15, 2024
- ENERMAX
Table of Contents
Addressable RGB AIO Cooler
120|240|360 mm
User’s Manual
Limited Warranty
Please read this limited warranty carefully. Warranty is subject to void under following criteria:
- The serial number label or warranty seal is defaced, modified, or removed.
- Taking apart of the product and/or modification of any component or cable without ENERMAX’s written authorization.
- Ignoring connector’s faulty-insertion-prevention design by attaching a connector to a device under incorrect orientation.
- Damage caused by natural phenomena or uncontrollable forces, such as lightning, flooding, fire, earthquake, or misuse, abuse, negligence, accident, wear and tear, mishandling, misapplication.
- ENERMAX is only liable for limited warranty service of ENERMAX product. ENERMAX is not liable for other damage or loss of time, interest, commercial opportunity due to using defect product of ENERMAX.
This ENERMAX Technology Corporation product is warranted to be free from
defects in material and workmanship for a period of two (2) years from the
date of purchase.
ENERMAX Technology Corporation agrees to repair or replace the product, at its
own option and at no charge, if, during the warranty period, it is returned to
nearest ENERMAX Technology Corporation subsidiary/agent with all shipping
charges prepaid and if inspection reveals that the product is defective.
Please present the proof of purchase for requesting RMA. Charges for removing
or installing the product are excluded under the terms of this warranty
agreement. This warranty shall not apply to any product, which has been
subject to connection to a faulty power source, alteration, negligence, or
accident, or to any product, which has been installed other than in accordance
with these instructions. In no event shall ENERMAX Technology Corporation, or
its subsidiaries, or agents be liable for damages for a breach of warranty in
an amount exceeding the purchase price of this product.
If you are uncertain whether or not your ENERMAX liquid cooler is defective,
please contact your dealer/reseller for support!
Web Site: http://www.enermax.com
E-mail: enermax@enermax.com.tw
ENERMAX Technology Corporation, 2F-1, No. 888, Jing-Guo Road, Taoyuan City
(330)
Tel. +886-3-316-1675, Fax. +886-3-346-6640
©2022 ENERMAX Technology Corporation. All rights reserved. Specifications are
subject to change without prior notice. Actual product and accessories may
differ from illustrations. Omissions and printing errors excepted. Content of
delivery might differ in different countries or areas. Some trademarks may be
claimed as the property of others.
Reproduction in any manner without the writien permission of ENERMAX is
strictly forbidden.
Warranty & Support information For Australia
Our goods come with guarantees that cannot be excluded under the Australian
Consumer Law.
You are entitled to a replacement or refund for a major failure and for
compensation for any other reasonably foreseeable loss or damage.
You are also entitled to have the goods repaired or replaced if the goods fail
to be of acceptable quality and the failure does not amount to a major falure.
Please read the above limited warranty. This warranty is valid only for the
ENERMAX products distributed by authorized dealer(s) in Australia.
Please contact ENERMAX for warranty and support information.
ENERMAX Technology Corporation 2F-1, No. 888, Jing-Guo Road, Taoyuan City
(330) Tel. +886-3-316-1675
Web Site: http://www.enermax.com
E-mail: enermax@enermax.com.tw
This ENERMAX liquid cooler is warranted to be free from defects in material
and workmanship for period stats in two(2) years. ENERMAX Technology
Corporation agrees to repair or replace the product, at its own option and at
no charge, if during the warranty perod, it is returned to nearest ENERMAX
Technology Corporation subsidiary/agent with all shipping charges prepaid and
bearing a return merchandize authorzation (RMA) number, and if inspection
reveals that the product is defective. Charges for removing or installing the
product are excluded under the terms of this warranty agreement. This warranty
shall not apply to any product, which has been subject to connection to a
faulty power source, alteration, negligence, or accident, or to any product,
which has been installed other than in accordance with these instructions. In
no event shall ENERMAX Technology Corporation, or its subsidiaries, or agents
be liable for damages for a breach of warranty in an amount exceeding the
purchase price of this product!
Unless stated in the manual, the standard product warranty period is described
in two(2) years.
If the goods is found defective within the period of warranty from the date of
purchase, please contact ENERMAX or your purchased retail shop/agent.
Please note that proof of purchase would be required when request the RMA.
Specification
Model| ELC-AQFAl20-SQA
ELC-AGFAl20-SQA-W| ELC-AQFA240-SQA
ELC-AQFA240-SQA-W| ELC-AQFA360-SQA
ELC-AQFA360-SQA-W
---|---|---|---
CPU socket| Intel* LGA 1700/1200/115)0066/2011/2011-3/1366
AMD® AmS/Am4/Am3+/Fm2+/Fm1
Radiator Dimension| 154 x 120 x 27mm| 274 x 120 x 27 mm| 394 x 120 x 27mm
Tube Length| 400mm
Material| Cold Plate| Copper
Radiator| Aluminum
Tube| Rubber
Pump| Bearing| Ceramic Bearing
MTBF| 50,000 hrs
Rated Voltage| 12V
Rated Current| 0.7A
Rated Current – RGB LED| 0.42A (SV)
Fan| Dimension| 120 x 120 x 26 mm
MTTF| 1′ 100,000 hrs
Speed| 500-2000 rpm
Rated Voltage| 12V
Rated Current| 0.38A
Rated Current -RGB LED| 1.08A (SV)
Air Flow| 39-79.8 CFM
Static Pressure| 0.67-3.6 mm-H20
Noise Level| 15-32.6 dBA
Connector| 4 Pin PWM + 3 Pin RGB (W/ extension adapter)
Thermal Grease| Dow Corning® TC-5121C
- Some motherboard put the capacitors around the boarder of CPU bracket, please carefully install the cooler on can avoid the mechanical interference.
Part List
120
Part List 240
Part List 360
Intel Installation
Before Install
Install the Intel clip to the pump.
Step 1
Attach the fan and the radiator to the chassis.
Step 2-1 *LGA1200/115X/1366
Insert the position screws into the proper holes on the back plate. Then use
the washers to fix the position screws.
《If your CPU platorm is Intel 1700, please skip to step 2-2》
《If your CPU platorm is Intel 2011/2011-3/2066, please skip to step 3-2》
Step 2-2
Insert the LGA1700 position screws into the proper holes on the back plate.
Then use the washers to fix the position screws.
Step 3-1
*LGA1700/1200/115X/1366
Install the Intel back plate on to the back of motherboard; fix the back plate with the stand-off.
Step 3-2
*Intel LGA 2011/2011-3/2066
Tighten the Intel LGA2011/2011-3/2066 screw to the motherboard.
Step 4
Apply the thermal grease evenly on the CPU surface..
Step 5
Remove the protect film from the cold-plate.
Step 6
Place the pump on the CPU and tighten the spring screws until all four corners are secured.
Step 7
Connect the pump power connector to the motherboard.
Notice: If you recognize that your mainboard’s CPU fan or PWM sockets do
not provide enough voltage to power the pump, please use the included SATA
adaptor and connect the pump directly to your PSU.
Step 8
Connect the fan connector to the motherboard.
AMD Installation
Before Install
Install the AMD clip to the pump.
Step 1
Attach the fan and the radiator to the chassis.
Step 2
Remove the original screws and place the back plate back into position.
Step 3
Tighten the AMD screw to the AMD stock back plate(included with the motherboard).
Step 4
Apply the thermal grease evenly on the CPU surface.
Step 5
Remove the protect film from the cold-plate.
Step 6
Place the pump on the CPU and tighten the spring screws until all four corners are secured.
Step 7
Connect the pump power connector to the motherboard.
Notice: If you recognize that your mainboard’s CPU fan or PWM sockets do not
provide enough voltage to power the pump, please use the included SATA adaptor
and connect the pump directly to your PSU.
Step 8
Connect the fan connector to the motherboard.
Motherboard Sync
Please ensure the motherboard with 3-pin (5V) Addressable RGB header
Connect the sync cable to a supported motherboard with RGB header.
For GIGABYTE motherboards, the pin assignment* of the addressable RGB headers is different from those of AQUAFUSION ADV. Therefore, when you install the cooler onto the motherboards, please connect the RGB Sync cable to the adapter (both cables are included in the AQUAFUSION ADV package). Next step please connect the RGB Sync adapter to the motherboard addressable RGB header, to enrich and perfect your lighting experience.
- GIGABYTE RGB header pin assignment: V/D/G
RGB Control Box
For non-addressable RGB motherboard
When you install the cooler onto the motherboard, please connect the RGB Sync cable to the water block, and then connect the power connectors to RGB control box. Meanwhile, connect the SATA power cable to PC power supply SATA connector.
The 4 LED colors indicate the different modes: GREEN (Light Effect), RED (Effect Speed), BLUE (Brightness), YELLOW (Auto-run).
- Press “M” until you reach the Light Effect Mode (GREEN).
- To change the effect, press the ▲ or ▼ button.
- 10 pre-set light effects:
- Racing-Rainbow (Default)
- Breathing-Rainbow
- Flash-Rainbow
- Overlaying-Rainbow
- Flow-Rainbow
- Colors auto-run (8 colors)
Press ▲ for 3 seconds to fix the current color. Press ▲ for 3 seconds again to return to the Colors auto-run effect. - Ripple auto-run (8 colors)
Press ▲ for 3 seconds to fix the current color. Press ▲ for 3 seconds again to return to the Flash auto-run effect. - Overlaying-RED
- Overlaying-GREEN
- Overlaying-BLUE
- Pressing ▼ for 3 seconds will return to the default “Racing-Rainbow” effect.
- Press “M” until you reach the Effect Speed Mode (RED).
- To change the effect speed, press the▲or▼button.
- Press “M” until you reach the Brightness Mode (BLUE).
- To adjust the brightness, press the▲or▼button.
- cPress “M” in any mode for 3 seconds to turn-off the light. Press “M” again to turn on the light and continue with the previous effect.
Noise Reducer
Installation
Compatible with 240 & 360mm | With Adaptor |
---|---|
Max Fan Speed | 1,700 rpm (±10 %) |
Max Fan Air Flow | 67.1 CFM |
Max Fan Static Pressure | 2.1 mm-H2O |
Max Fan Maximum Noise | 27.4 dBA |
©2023 ENERMAX TECHNOLOGY CORPORATION. All right reserved. Specifications are
subject to
change without prior notice. Some trademarks may be claimed as the property of
others.
Jul. 2023
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>