ENERMAX MarbleShell MS31 ARGB Airflow PC Cases Installation Guide

ENERMAX MarbleShell MS31 ARGB Airflow PC Cases

Specifications

• Model Name: MarbleShell MS
• Dimensions (Case): 415 x 210 x 470
• Material: Tempered Glass, SPCC
• M/B Type: E-ATX, ATX, Micro-ATX, Mini-ITX
• I/O: USB3.0 x 2, USB3.2 Type C x 1, HD Audio
• 3.5” Drive Bays: 2
• 2.5” Expansion Slots: 3 (1 x converted from 3.5” HDD Cage)
• Expansion Slots: 7
• Fan Support:
  • Front: 3 x 120mm / 3 x 140mm
  • Top: 3 x 120mm / 2 x 140mm
  • Rear: 1 x 120mm
  • Side: 2 x 120mm
  • PSU Tunnel Front: 2 x 120mm
• Radiator Support:
  • Top: 240 / 280 / 360mm
  • Rear: 120mm
• PSU Clearance: 230mm (Maximum)
• GPU Clearance: 370mm (With Radiator), 410mm (Without Radiator)
• CPU Cooler Clearance: 162mm
• Cable Routing Space: 25mm

Product View

*The actual product depends on different regions or countries.

Accessory Box Contents

• A. Screw for M/B mounting X 12 (Also for 2.5” SSD mounting)
• B. Stand-off bolt for 2.5” SSD mounting X 8
• C. Anti-vibration rings for 2.5 SSD mounting X 8
• D. Screw for 3.5 HDD mounting X 8
• E. Stand-off bolt for M/B mounting X 2
• F. Screw for PSU & expansion slots mounting X 6
• G. GPU holder X 1
• H. Cable ties X 5

Motherboard Cable Connection Description

*Please connect to PSU. It might be some differences among each M/B, please check with your M/B manual before installing.

Motherboard Compatibility

Description of motherboard compatibility.

Frequently Asked Questions

Q: Can I install a larger GPU in the MarbleShell MS case?

A: Yes, the MarbleShell MS case supports GPUs with a maximum length of up to 370mm with a radiator and up to 410mm without a radiator.

Q: How many expansion slots are available in the MarbleShell MS case?

A: The case offers a total of 7 expansion slots for additional components.

Q: What types of motherboards are compatible with the MarbleShell MS case?

A: The MarbleShell MS case is compatible with E-ATX, ATX, Micro-ATX, and Mini- ITX motherboards.

Follow ENERMAX on social media for the latest informaton and show us your build with hashtag #ENERMAX

• Facebook: https://www.facebook.com/OfficialENERMAX
• Instagram: https://www.instagram.com/OfficialENERMAX
• Twitter: https://twitter.com/OfficialENERMAX
• YouTube: https://www.youtube.com/@OfficialENERMAX

Specification

Drive Bays

| 3.5”| 2
2.5”| 3 (1 x converted from 3.5”HDD Cage)
Expansion Slots| 7

Fan Support

| Front| 3 x 120mm / 3 x 140mm
Top| 3 x 120mm / 2 x 140mm
Rear| 1 x 120mm
Side| 2 x 120mm
PSU Tunnel| 2 x 120mm

Radiator Support

| Front| 240 / 280 / 360 / 420mm
Top| 240 / 280 / 360mm
Rear| 120mm

Clearance

| PSU| 230mm(Maximum)

GPU

| 370mm(With Radiator)
410mm(Without Radiator)
CPU Cooler| 162mm
Cable Routing Space| 25mm

• Product specifications are subject to change without notice.
• Options vary by countries or regions.

Product View

*The actual product depends on different regions or countries.

Accessory Box Contents

Cable Connection Description

It might be some differences among each M/B, please check with your M/B manual before installing.

Installation Step 1

Remove both side panels.

Installation Step 2

Install the motherboard into the chassis.

Motherboard Compatibility
*The side fans and cutouts might be interfered with while using the E-ATX motherboard.

Installation Step 3

Step 3-1

Install the internal 2.5’’device.

Step 3-2

Install the internal 3.5’’device.

Installation Step 4

Install the system fans or radiator.

Fan Compatibility

• As installing the side fans, the front fans must be installed on the outside of the chassis.
• This picture is for reference only, installation is subject to the actual situation.

Both Thick and Thin Radiator Compatibility

• The top radiator and the front radiator canʼt be installed at the same time.
• This picture is for reference only, installation is subject to the actual situation.

Air Cooler Compatibility

Installation Step 5

Step 5-1

Remove the slot volume you will use to install GPU.

Step 5-2

Install the GPU into the chassis.

GPU Compatibility

Installation Step 6

*Remove the HDD cage to create extra space for larger PSU installation.

Install the PSU into the chassis.

Visit Us at:
Global (Except North America & Korea): www.enermax.com
North America: www.enermaxusa.com
Korea: www.enermaxkorea.com

Support Team:
General: [email protected]
North America/English: [email protected]
Germany/Deutsch: [email protected]
France/French: [email protected]
EMEA: [email protected]

Japan/Japanese: [email protected]
Korea/Korean: [email protected]
Taoyuan/Mandarin: [email protected]
APAC: [email protected]

Find answers to your questions at: www.enermax.com/en/faq
If you can’t find an answer to your question by searching in the FAQ, please contact your local support team or contact us at www.enermax.com/support

References

• er.com is for sale | www.oxley.com
• Technical Support - 保銳科技股份有限公司
• 에너맥스코리아
• Enermax USA website

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>