SKYDANCE PF1 4-Key Panel RF Remote Controller User Manual
- June 5, 2024
- SKYDANCE
Table of Contents
4-Key Panel RF Remote Controller
Model No.: PF1, PF1-2, PF2, PF3
4-key panel/1-4 color/Wireless remote 30m distance/CR2032 battery
Features
- Apply to single color, dual color or RGB/RGBW LED controller.
- Each remote can match one or more receivers.
- CR2032 battery powered.
- Removeable and stick anywhere easily, or mount on wall use panel base.
Technical Parameters
Input and Output
| Output signal | RF (2.4GHz) |
|---|---|
| Working voltage | 3VDC (CR2032) |
| Working current | ＜5mA |
| Standby current | ＜2μA |
| Standby time | 2 years |
| Remote distance | 30m(Barrier-free space) |
Environment
| Operation temperature | Ta: -30 O C ~ +55 O C |
|---|---|
| IP rating | IP20 |
Safety and EMC
EMC standard (EMC)| ETSI EN 301 489-1 V2.2.3
ETSI EN 301 489-17 V3.2.4
---|---
Safety standard(LVD)| EN 62368-1:2020+A11:2020
Radio Equipment(RED)| ETSI EN 300 328 V2.2.2
Certification| CE,EMC,LVD,RED
Warranty
| Warranty | 5 years |
|---|
Weight
| Gross weight | 0.057kg |
|---|---|
| Net weight | 0.075kg |
Mechanical Structures and Installations
| Replace battery: | Typical base as below: |
|---|
Installation diagram:
To fix the panel, two options are offered for selection:
Option 1: fix it on the wall with two screws.
Option 2: adhere it to the wall with paster.
Key function
● PF1 Single color dimming remote
● PF1-2 2 zone single color dimming remote
● PF2 Color temperature remote
● PF3 RGB/RGBW remote
Color: Change static RGB color.
Short press get 24 kinds static color, long press for continuous static color
adjustment.
Speed / Saturation:
For dynamic mode, adjust speed.
Short press 10 levels, long press 2s get the default speed.
For static color, adjust saturation, namely change current static color to
mixed white slowly.
Short press 11 levels, long press 1-6s for continuous 256 levels adjustment.
RGBW light:
long press Mode + Speed/Saturation key to adjust W channel brightness
simultaneously.
Match Remote Control (two match ways)
End user can choose the suitable match/delete ways. Two options are offered for selection:
Use the controller’s Match key
Match:
Short press match key, immediately press on/off key on the remote.
The LED indicator fast flash a few times means match is successful.
Delete:
Press and hold match key for 5s to delete all match, The LED indicator fast
flash a few times means all matched remotes were deleted.
Use Power Restart
Match:
Switch off the power, then switch on power, and repeat again.
Immediately short press on/off key 3 times on the remote.
The light blinks 3 times means match is successful.
Delete:
Switch off the power, then switch on power, repeat again.
Immediately short press on/off key 5 times on the remote.
The light blinks 5 times means all matched remotes were deleted.
Safety information
-
Read all instructions carefully before you begin this installation.
-
When installing battery, pay attention to the battery positive and negative polarity. A long time without the remote control, remove the battery.
When remote distance becomes smaller and insensitive, replace the battery. -
If no response from the receiver, please re-match the remote.
-
Gently handle remote, beware of falling.
-
For indoor and dry location use only.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>