levenhuk Wezzer BASE L80 Thermohygrometer User Manual

: June 5, 2024
: levenhuk

Table of Contents

levenhuk Wezzer BASE L80 Thermohygrometer
Base station
Sensor
Levenhuk Wezzer BASE L80 Thermohygrometer
Getting started
History record
Specifications
Care and maintenance
Battery safety instructions
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

levenhuk Wezzer BASE L80 Thermohygrometer

Base station

Weather forecast
Time display
Alarm/snooze
Sensor connection status
Outdoor temperature and humidity
Indoor temperature and humidity
SNZ/LIGHT button
Wall mount hole
DOWN button
UP button
MODE button
Battery compartment cover
Power input

Sensor

Levenhuk Wezzer BASE L80 Thermohygrometer

The kit includes: base station, sensor, USB cable, user manual, and warranty. Also required (not included):

2 AAA batteries for each sensor
2 AAA batteries for the base station

Caution
Please remember that mains voltage in most European countries is 220—240V. If you want to use your device in a country with a different mains voltage standard, remember that use of a converter is absolutely necessary.

Getting started

Base station

Connect the power cable to the device and the DC adapter (not included) via a USB plug and connect to the AC power supply; or
Open the battery compartment cover (12) and insert 2 batteries according to the correct polarity. Close the cover.
NOTE!
It is recommended to use an adapter for the continuous operation of the base station, although battery power is also possible.
Wait until the indoor temperature is displayed on the base station.

Sensor
Open the battery compartment cover (4) and insert 2 batteries according to the correct polarity. Close the cover.

Sensor connection
Place the base station and the remote sensor within the effective transmission range. If the values are not received from a channel, сheck the batteries andtry again. Check if there is any source of interference. When changing batteries, replace the batteries first in the base unit, and then in the sensor, to re-establish the connection. If an adapter supplies power to any of the devices, briefly disconnect the power to that device when replacing the batteries. If you change the batteries only in one of the devices (for example, in the sensor), the signal may not be received correctly. The effective range may differ depending on the unit’s position. Due to interference (various remote control devices, etc.), the maximum distance between the base unit and the sensor may be significantly reduced. In such cases, we suggest moving the base unit and sensor a little.

NOTE!
Although the sensor is weather-resistant, never place it in direct sunlight or in the rain or snow.

Time setting
Press the MODE button and hold it for 3 seconds. The digits that are to be set are flashing. Press UP or DOWN to change the value, and then press MODE to continue. The setting order: 12/24h > Hours > Minutes. Finally, press the MODE button to save the settings and exit.

Alarm setting
Press the MODE button, and then press it again and hold it for 3 seconds. The digits that are to be set are flashing. Press UP or DOWN to change the value, and then press the MODE button to continue.The setting order: Hours > Minutes.Press UP or DOWN to turn the alarm on or off.

Snooze/light function
When the alarm rings, press SNZ/LIGHT to activate the snooze function. The alarm will sound again in 5 minutes.In battery mode, the backlight turns on only for a short period of time.

Low battery indicator
If the low battery indicator is displayed for either the outdoor sensor or the base station, immediately change the batteries.

Weather
Temperature
Press the DOWN button to switch between °C and °F.

Weather forecast

Sunny
Partly cloudy
Cloudy
Rainy
Snowy

History record

Press the UP button to display the MAX./MIN. temperature and humidity.
To clear the history records, press and hold the UP button for 3 seconds.

Specifications

Base station

Air humidity, units of measurement| % (RH)
Operating humidity range (indoors)| 20… 95%
Temperature, units of measurement| °F, °C
Operating temperature range (indoors)| –10… +50°C (+14… +122°F)
Time format| 24 hours, 12 hours
Screen| color, with an LED backlight
Power supply| AC/DC adapter 5V 500mA (not included), 2 ААА batteries (not included)
Micro USB cable| 1.5m (4.9ft.), included
Dimensions| 95x75x110mm (3.7×2.9×4.3in.)
Wireless sensor| 1 pc. (included)
Sensor

The manufacturer reserves the right to make changes to the product range and specifications without prior notice.

Care and maintenance

Take the necessary precautions when using the device with children or others who have not read or who do not fully understand these instructions.
Do not try to disassemble the device on your own for any reason. For repairs and cleaning of any kind, please contact your local specialized service center.
Protect the device from sudden impact and excessive mechanical force.
Store the device in a dry, cool place away from hazardous acids and other chemicals, away from heaters, open fire, and other sources of high temperatures.
Operate the device only in a completely dry environment and do not touch the device with wet or damp body parts.
Only use accessories and spare parts for this device that comply with the technical specifications.
Check this device and its cables and connections for any possible damage before use.
Never attempt to operate a damaged device or a device with damaged electrical parts! Damaged parts must be replaced immediately by an authorized service agent.
If a part of the device or battery is swallowed, seek medical attention immediately.
Children should use the device under adult supervision only.

Battery safety instructions

Always purchase the correct size and grade of battery most suitable for the intended use. Make sure the batteries are installed correctly with regard to polarity (+ and —).Never short-circuit batteries as this may lead to high temperatures, leakage, or explosion. Never heat batteries in order to revive them. Do not disassemble batteries. Keep batteries out of the reach of children, to avoid risk of ingestion, suffocation, or poisoning. Utilize used batteries as prescribed by your country’s laws.Warranty: lifetime. For further details, please visit our web site: www.levenhuk.com/warranty