EVOLVEO Armor 01 Wireless Speaker Instructions
- June 6, 2024
- Evolveo
Table of Contents
EVOLVEO Armor 01 Wireless Speaker Instructions
Thank you for choosing Wireless Speaker. ARMOR 01/02 is equipped with Bluetooth 4.2 for optimal connection & pairing with your Bluetooth enabled device. Please read the user manual before use and keep it handy for future reference.
FEATURES
- Silicon covered exterior with IPX7 water-resistance rating.
- Passive radiator for deep bass.
- True Wireless Stereo (TWS) for stereo surround sound.
- Output up to 10W.
- Up to 24 hours of playtime.
- Bluetooth 4.2
- Equipped with USB Type-C port supporting DC 5V/1A input charging.
PACKAGE CONTENTS
- 1 x wireless speaker
- 1 x Charging cable
- 1 x 3.5mm AUX cable
- 1 x 60cm lanyard
- 1 x Warranty card
BUTTON CONFIGURATIONS
- Power ON/OFF; TWS
- Play/Pause/Hands-free
- Volume-/Previous track
- Volume+/Next track
- Charging port
- Micro SD/TF card slot
- AUX-in
- TWS indicator
- Bluetooth indicator
FUNCTIONS
SPECIFICATIONS
BLUETOOTH PAIRING
Turn ON the speaker, the blue LED light flashes, and then activate the Bluetooth in your device. Go to device’s Bluetooth settings, scan for new Bluetooth devices and upon discovering the device ARMOR 01/02, click to pair with it. Hold Play/Pause button for 3 seconds to disconnect the Bluetooth.
TWS MODE
What is TWS?
TWS is true wireless stereo, which means two Bluetooth speakers are able to be paired and then play music synchronously, providing stereo surround sound.
How to pair two speakers?
- Turn ON two speakers and confirm they are disconnected to any Bluetooth device.
- Double press the Power ON/OFF button quickly on one speaker, then you will hear a voice prompt and the TWS indicator light flashes yellow, which means it enters TWS pairing mode and will pair with each other automatically. After connecting successfully, you will hear a sound prompt from two speakers and the TWS indicators of both are kept ON yellow while the Bluetooth indicator of the main speaker flashes blue quickly.
- Go to device’s Bluetooth settings, scan for ARMOR 01/02, click to pair with it. The Bluetooth indicator of main speaker being steady ON blue means the connection to Bluetooth device is successful. And when start to play music, this blue indicator will flash slowly.
How to disconnect TWS?
During TWS mode, double press the Power ON/OFF button of one speaker, then the TWS will be disconnected. Note: Once two speakers are well paired for the first time, they will be automatically paired next time without the above pairing operations as long as they are ON.
AUX-IN MODE
The speaker also features one AUX audio in port. Simply connect the speaker with your mobile phone/MP3 player/PC/laptop with the 3.5mm audio jack cable. Once the blue light flashes slowly, then you can play music via the wired connection.
MICRO SD/TF CARD MODE
Press the Power ON/OFF button to switch Bluetooth Mode to Micro SD/TF
card Mode. The memory capacity of Micro SD/TF card should be no more than 64GB.
LED
Bluetooth: Blue light flashes slowly for waiting for pairing mode. Blue light kept ON for connected successfully. Micro SD/TF & AUX-IN: Blue light flashes slowly. TWS: The TWS indicator flashes yellow slowly for pairing. Yellow light kept ON for paired successfully. Light goes off for canceling the pair. Charging: Red light ON for charging. Red light goes OFF for charging completion.
SLEEP MODE
The ARMOR speaker will go into Sleep Mode if it does not pair with any device through Bluetooth or after paired over Bluetooth, there is nothing is played within 10-15 minutes that helps to save battery power. When you need to use it, press the Power ON/OFF button to turn it on.
NOTE
You can hold the Power ON/OFF button for 5-8 seconds to turn off the speaker forcedly when it is malfunctions.
TIPS
Because of the powerful output of this speaker, please do not be too close to the speaker and keep an appropriate distance away to listen to the music. To avoid any discomfort caused by excessive sound, it is recommended to listen to music at a suitable volume.
CAUTION
RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE. DISPOSE OF USED BATTERIES ACCORDING TO INSTRUCTIONS.
To prevent possible hearing damage, do not listen at high volume levels for long periods.
CARE & MAINTENANCE
Please keep this manual handy for future reference. To clean the Bluetooth Speaker use a lightly dampened cloth in water to clean the exterior in-case it gets dirty. Do not use any form of detergents or cleaning material to clean the product, any type of chemical may make this device unusable. Do not disassemble this product. It contains no user serviceable parts.
Disposal: The symbol of crossed out container on the product, in the literature or on the wrapping means that in the European Union all the electric and electronic products, batteries and accumulators must be placed into the separate salvage after finishing their lifetime. Do not throw these products into the unsorted municipal waste
DECLARATION OF CONFORMITY Hereby, the company Abacus Electric, s.r.o. declares that the EVOLVEO Armor 01/02 is in compliance with the requirements of the standards and regulations, relevant for the given type of device.
Find the complete text of Declaration of Conformity at ftp://ftp.evolveo.com/ce
Importer:
Abacus Electric, s.r.o. Planá 2, 370 01, Czech Republic
Manufacturer
Naxya Limited No.5, 17/F, Strand 50,50 Bonham Strand, Sheung Wan, Hong Kong Made in China
Copyright © Abacus Electric, s.r.o. www.evolveo.com www.facebook.com/EvolveoCZ
All rights reserved.
Design and specification may be changed without prior notice.
Read More About This Manual & Download PDF:
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>