levenhuk Discovery Report W20-S Sensor for Weather Stations Instructions

: June 5, 2024
: levenhuk

Table of Contents

Getting started
Sensor
Sensor connection
Specifications
Care and maintenance
Battery safety instructions
Warranty
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

levenhuk Discovery Report W20-S Sensor for Weather Stations Instructions

Getting started

Open the battery compartment cover (3) and insert 2 batteries according to the correct polarity. Close the cover.

Sensor

LED indicator
Wall mount hole
Battery compartment cover

Sensor connection

Place the base station and the remote sensor within the effective transmission range. If the values are not received from a channel, сheck the batteries and try again. Check if there is any source of interference. When changing batteries, replace the batteries in the base unit first and then in the sensor in order to re-establish the connection. If an adapter supplies power to any of the devices, briefly disconnect the power to that device when replacing the batteries. If you change the batteries only in one of the devices (for example, in the sensor), the signal may not be received correctly. The effective range may differ depending on the unit’s position. Due to interference (various remote control devices, etc.), the maximum distance between the base unit and the sensor may be significantly reduced. In such cases, we suggest moving the base unit and sensor a little.

Specifications

Radio signal frequency 433MHz
Radio signal radius 100m (328ft.)
Operating temperature range (outdoors) –50… +70°C (–58… +158°F)
Power supply 2 AAA batteries (not included)

Care and maintenance

Take the necessary precautions when using the device with children or others who have not read or who do not fully understand these instructions. Do not try to disassemble the device on your own for any reason. For repairs and cleaning of any kind, please contact your local specialized service center. Protect the device from sudden impact and excessive mechanical force. Store the device in a dry cool place. Only use accessories and spare parts for this device that comply with the technical specifications. Never attempt to operate a damaged device or a device with damaged electrical parts! If a part of the device or battery is swallowed, seek medical attention immediately. Children should use the device under adult supervision only.

Battery safety instructions

Always purchase the correct size and grade of battery most suitable for the intended use. Make sure the batteries are installed correctly with regard to polarity (+ and –). Never short-circuit batteries as this may lead to high temperatures, leakage, or explosion. Never heat batteries in order to revive them. Do not disassemble batteries. Keep batteries out of the reach of children, to avoid risk of ingestion, suffocation, or poisoning. Utilize used batteries as prescribed by your country’s laws.

Warranty

Warranty 6 months. For further details, please visit our web site:
www.levenhuk.com/warranty

The manufacturer reserves the right to make changes to the product range and specifications without prior notice.

Levenhuk Inc. (USA): 928 E 124th Ave. Ste D, Tampa, FL 33612, USA,+1-813-468-3001, contact_us@levenhuk.com. Levenhuk Optics s.r.o. (Europe): V Chotejně 700/7, 102 00 Prague 102, Czech Republic, +420 737-004-919, sales-info@levenhuk.cz. Levenhuk® is a registered trademark of Levenhuk, Inc. © 2006—2022 Levenhuk, Inc. All rights reserved. www.levenhuk.com